ETSI TS 145 008-2017 Digital cellular telecommunications system (Phase 2+) (GSM) GSM EDGE Radio subsystem link control (V14 2 0 3GPP TS 45 008 version 14 2 0 Release 14)《数字蜂窝通信系统(第.pdf

1、 ETSI TS 1Digital cellular telecommGSM/EDGE R(3GPP TS 45.0TECHNICAL SPECIFICATION145 008 V13.4.0 (2017mmunications system (Phase Radio subsystem link contro.008 version 13.4.0 Release 13GLOBAL SYSTEMOBILE COMMUN17-01) e 2+) (GSM); rol 13) TEM FOR ICATIONSRETSI ETSI TS 145 008 V13.4.0 (2017-01)13GPP

2、TS 45.008 version 13.4.0 Release 13Reference RTS/TSGR-0645008vd40 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse

3、(06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified withou

4、t the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the

5、 present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your com

6、ment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI.

7、The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are

8、 Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 145 008 V13.4.0 (20

9、17-01)23GPP TS 45.008 version 13.4.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be f

10、ound in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR

11、Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This

12、Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding

13、 ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are

14、to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 145 008 V13.4.0 (2017-01)33GPP TS 45.008 version 13.4.0 Release 13Cont

15、ents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 8g31 Scope 9g31.1 References 9g31.2 Abbreviations . 11g31.3 Definitions 11g31.4 Restrictions . 11g32 General . 12g33 Handover 13g33.1 Overall process . 13g33.2 MS measurement procedure . 13g33.3 BSS measurement

16、procedure 13g33.4 Strategy 14g34 RF power control 14g34.1 Overall process . 14g34.2 MS implementation 14g34.2.1 General 14g34.2.2 (EC-)RACH 15g34.2.2.1 Random access procedure when EC operation is not enabled 15g34.2.2.2 Random access procedure when EC operation is enabled 16g34.3 MS power control r

17、ange . 17g34.4 BSS implementation . 17g34.4.1 VAMOS subchannel power control for BSS in downlink 17g34.5 BSS power control range 17g34.6 Strategy 18g34.7 Timing 18g34.7.1 Normal Power Control 18g34.7.2 Fast Power Control . 18g34.7.3 Enhanced Power Control 19g34.8 Dedicated channels used for a voice

18、group call or voice broadcast 19g35 Radio link failure 19g35.1 Criterion . 19g35.2 MS procedure . 20g35.3 BSS procedure 20g36 Idle mode tasks . 20g36.1 Introduction 20g36.2 Measurements for normal cell selection . 22g36.3 Measurements for stored list cell selection . 22g36.4 Criteria for cell select

19、ion and reselection . 23g36.4.1 C1 path loss criterion 23g36.4.2 C2 reselection criterion . 24g36.4.3 C4 criteria . 25g36.4.4 Disabling of EC operation 26g36.5 Downlink signalling failure 26g36.6 Measurements for Cell Reselection 26g36.6.0 General 26g36.6.1 Monitoring of received signal level and BC

20、CH data 27g36.6.1.1 Applicability 27g36.6.1.2 Monitoring of received signal level 27g3ETSI ETSI TS 145 008 V13.4.0 (2017-01)43GPP TS 45.008 version 13.4.0 Release 136.6.1.3 Monitoring of BCCH data and BSIC decoding . 27g36.6.1.4 Determination of available PLMNs 28g36.6.1.5 Requirements for synchroni

21、zation and reading of BCCH data . 28g36.6.1a Reduced Monitoring of received signal level and (EC-)BCCH data 28g36.6.1a.1 General 28g36.6.1a.2 Monitoring of the serving cell . 28g36.6.1a.3 Criteria for triggering measurements for cell re-selection. 29g36.6.1a.4 Monitoring of non-serving cells 29g36.6

22、.2 Path loss criteria and timings for cell re-selection 30g36.6.3 Cell reselection algorithm for SoLSA . 31g36.6.4 Measurements on cells of other radio access technologies . 31g36.6.5 Algorithm for cell re-selection from GSM to UTRAN based on cell ranking 36g36.6.6 Algorithm for inter-RAT cell re-se

23、lection based on priority information . 37g36.6.7 Cell selection and re-selection to CSG cells and hybrid cells . 40g36.6.7.1 Cell re-selection to CSG cells . 40g36.6.7.1a Cell re-selection to hybrid cells . 41g36.6.7.2 Manual CSG ID selection . 41g36.7 Release of TCH, SDCCH and DBPSCH 41g36.7.1 Nor

24、mal case 41g36.7.2 Call re-establishment 42g36.8 Abnormal cases and emergency calls . 42g36.9 RLA_EC signal level and SLA measurements . 43g36.9.1 General 43g36.9.2 Physical parameters 43g36.9.3 Statistical parameter 43g36.9.4 Accuracy requirements . 44g36.9.5 Void 44g36.9a RLA_GC signal level measu

25、rements . 44g36.9a.1 General 44g36.9a.2 Physical parameter 44g36.9a.3 Statistical parameter 44g36.9a.4 Accuracy requirements . 44g36.10 Coverage class selection for EC-GSM-IoT 45g36.10.1 General 45g36.10.2 Downlink coverage class selection . 45g36.10.3 Uplink coverage class selection 45g36.10.4 Cove

26、rage class adaptation for EC-CCCH . 46g36.10.5 Downlink coverage class update . 46g37 Network pre-requisites . 47g37.1 BCCH carriers 47g37.2 Identification of surrounding BSS 48g37.2.1 General 48g37.2.2 Identification of surrounding BSS for handover measurements . 49g37.3 Handover measurements on ot

27、her radio access technologies . 50g37.4 Handover measurements on UTRAN CSG cells and hybrid cells . 53g38 Radio link measurements . 54g38.1 Signal level . 54g38.1.1 General 54g38.1.2 Physical parameter 54g38.1.3 Statistical parameters 55g38.1.4 Range of parameter . 55g38.1.5 Measurement quantity for

28、 other radio access technologies 56g38.1.5.1 UTRAN FDD 56g38.1.5.2 UTRAN TDD 56g38.1.5.3 cdma2000 56g38.1.5.4 E-UTRAN FDD 57g38.1.5.5 E-UTRAN TDD 58g38.2 Signal quality 58g38.2.1 General 58g38.2.2 Physical parameter 58g3ETSI ETSI TS 145 008 V13.4.0 (2017-01)53GPP TS 45.008 version 13.4.0 Release 138

29、.2.3 Statistical parameters 59g38.2.3.1 RXQUAL 59g38.2.3.2 MEAN_ BEP and CV_BEP 59g38.2.4 Range of parameter RXQUAL . 60g38.2.5 Range of parameters MEAN_BEP and CV_BEP . 61g38.3 Aspects of discontinuous transmission (DTX) . 65g38.4 Measurement reporting . 66g38.4.1 Measurement reporting for the MS .

30、 66g38.4.1a Measurement reporting for the MS in FPC mode . 68g38.4.1b Measurement reporting for the MS in EPC mode . 68g38.4.2 Measurement reporting for the MS on a SDCCH . 69g38.4.3 Additional cell reporting requirements for multi band MS . 69g38.4.4 Common aspects for the MS on a TCH, a SDCCH or a

31、 DBPSCH . 70g38.4.5 Measurement reporting for the BSS . 70g38.4.6 Extended measurement reporting . 71g38.4.7 Additional cell reporting requirements for multi-RAT MS 71g38.4.8 Enhanced Measurement Reporting . 73g38.4.8.1 Reporting Priority . 73g38.4.8.2 Measurement Reporting 74g38.4.8.3 NBR_RCVD_BLOC

32、KS for FLO 75g38.4.9 Requirements for measurement and reporting of CSG cells and hybrid cells 75g38.5 Absolute MS-BTS distance 76g38.5.1 General 76g38.5.2 Physical parameter 76g39 Control parameters . 77g310 GPRS mode tasks . 86g310.1 Cell Re-selection 86g310.1.0 General 86g310.1.1 Monitoring the re

33、ceived signal level and PBCCH data 87g310.1.1.0 General 87g310.1.1.1 Packet idle mode or MAC-Idle state . 88g310.1.1.2 Packet transfer mode or MAC-Shared state 88g310.1.1.2a Broadcast/multicast receive mode . 90g310.1.1.3 Monitoring cells of other radio access technologies . 90g310.1.2 Cell Re-selec

34、tion Criteria 94g310.1.3 Cell Re-selection Algorithm . 95g310.1.3.1 Abnormal cell reselection . 96g310.1.3.2 Algorithm for cell re-selection from GSM to UTRAN based on cell ranking 97g310.1.3.3 Algorithm for inter-RAT cell re-selection based on priority information . 98g310.1.3.4 Cell selection and

35、re-selection to CSG cells and hybrid cells . 98g310.1.4 Network controlled Cell re-selection 98g310.1.4.1 Measurement reporting . 99g310.1.4.2 Cell re-selection command 104g310.1.4.3 Exceptional cases 104g310.1a Measurement and Reporting of CSG Cells and hybrid cells 104g310.2 RF Power Control . 105

36、g310.2.1 MS output power 105g310.2.2 BTS output power . 106g310.2.3 Measurements at MS side . 107g310.2.3.1 Deriving the C value . 108g310.2.3.1.1 Packet idle mode or MAC-Idle state . 108g310.2.3.1.2 Packet transfer mode or MAC-Shared state 108g310.2.3.1.2.1 MS that have not enabled EC operation . 1

37、08g310.2.3.1.2.2 MS that have enabled EC operation . 110g310.2.3.2 Derivation of Channel Quality Report 110g310.2.3.2.1 Packet transfer mode or MAC-Shared state 111g310.2.3.2.2 Void . 114g310.2.3.2.3 Measurement reporting 114g310.2.3.2.4 Measurement reporting - additional requirements for downlink d

38、ual carrier 115g310.2.3.2.5 Measurement reporting - additional requirements for downlink multi carrier. 116g3ETSI ETSI TS 145 008 V13.4.0 (2017-01)63GPP TS 45.008 version 13.4.0 Release 1310.2.3.3 Range of parameters MEAN_BEP and CV_BEP for EGPRS2 116g310.2.4 Measurements at BSS side 120g310.2a Pack

39、et-switched Handover . 120g310.3 Measurement requirements 120g310.4 Control parameters . 120g311 CTS mode tasks 128g311.1 CTS idle mode tasks . 128g311.1.1 CTS cell selection . 129g311.1.1.1 Synchronization and measurements for CTS cell selection 129g311.1.1.2 Initial sychronization of CTS-MS . 129g

40、311.1.2 Criterion for CTS cell selection 129g311.1.3 Monitoring of CTSBCH and CTSPCH . 130g311.1.3.1 Monitoring of received signal level 130g311.1.3.2 Downlink beacon failure . 130g311.1.3.3 Downlink paging failure . 130g311.1.4 Procedures with reporting to the CTS-FP . 130g311.1.4.1 AFA monitoring

41、130g311.1.4.2 BCCH detection 131g311.1.4.3 Observed Frequency Offset (OFO) measurement . 131g311.2 Intra-cell handover . 131g311.2.1 Overall process . 131g311.2.2 CTS-MS measurement procedure . 131g311.2.3 CTS-FP measurement procedure 132g311.2.4 Strategy . 132g311.3 RF power control 132g311.3.1 Ove

42、rall process . 132g311.3.2 CTS-MS implementation 132g311.3.3 CTS-MS power control range . 132g311.3.4 CTS-FP implementation . 133g311.3.5 CTS-FP power control range 133g311.3.6 Strategy . 133g311.3.7 Timing 133g311.4 Radio link failure 133g311.4.1 Criterion 133g311.4.2 CTS-MS procedure . 133g311.4.3

43、 CTS-FP procedure 134g311.5 Radio link measurements . 134g311.5.1 Signal strength 134g311.5.1.1 General 134g311.5.1.2 Physical parameter 134g311.5.1.3 Statistical parameters 134g311.5.1.4 Range of parameter . 134g311.5.2 Signal quality 135g311.5.2.1 General 135g311.5.2.2 Physical parameter 135g311.5

44、.2.3 Statistical parameters 135g311.5.2.4 Range of parameter . 135g311.5.3 Aspects of discontinuous transmission (DTX) . 135g311.5.4 Measurement reporting for the CTS-MS on a TCH 135g311.6 Control of CTS-FP service range . 136g311.7 Control parameters . 136g312 COMPACT Mode Tasks 138g312.1 Introduct

45、ion 138g312.2 Network Pre-requisites . 138g312.2.1 CPBCCH carriers 138g312.3 COMPACT Idle Mode Tasks . 138g312.3.1 Introduction. 138g312.3.2 Measurements for COMPACT Cell Selection 138g312.3.3 Measurements for COMPACT Stored List Cell Selection . 139g312.3.4 Criteria for COMPACT Cell Selection . 139

46、g3ETSI ETSI TS 145 008 V13.4.0 (2017-01)73GPP TS 45.008 version 13.4.0 Release 1312.3.5 Downlink Signalling Failure . 139g312.4 COMPACT Cell Reselection . 139g312.4.1 Monitoring the received signal level and CPBCCH data 140g312.4.1.1 Packet idle mode or MAC-Idle state . 140g312.4.1.2 Packet transfer

47、 mode or MAC-Shared state 140g312.4.2 COMPACT cell reselection criteria 141g312.4.3 COMPACT cell reselection algorithm 141g312.4.4 Network controlled Cell reselection . 141g312.4.5 COMPACT cell reselection measurement opportunities 141g3Annex A (informative): Definition of a basic GSM or DCS 1 800 h

48、andover and RF power control algorithm . 142g3A.1 Scope 142g3A.2 Functional requirement. 142g3A.3 BSS pre-processing and threshold comparisons. 143g3A.3.1 Measurement averaging process . 143g3A.3.2 Threshold comparison process . 144g3A.3.2.1 RF power control process . 144g3A.3.2.2 Handover Process .

49、 145g3A.4 BSS decision algorithm 146g3A.4.1 Internal intracell handover according to radio criteria: (Interference problems) 146g3A.4.2 Internal handover according to other criteria 147g3A.4.3 General considerations . 147g3A.5 Channel allocation 147g3A.6 Handover decision algorithm in the MSC 148g3Annex B (informative): Power Control Procedures 150g3B.1 Open loop control . 150g3B.2 Closed loop control 151g3B.3 Quality based control 151g3B.4 BTS power control . 152g3B.5 Example 152g3B.6 Interworking between normal and fast power control for ECSD . 153g3B.7 Interworking between