ETSI TS 146 002-2016 Digital cellular telecommunications system (Phase 2+) Half rate speech Half rate speech processing functions (V13 0 0 3GPP TS 46 002 version 13 0 0 Release 13).pdf

1、 ETSI TS 1Digital cellular telecoHHalf rate spe(3GPP TS 46.0TECHNICAL SPECIFICATION146 002 V13.0.0 (2016communications system (PhaHalf rate speech; peech processing functions .002 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); 13) TEM FOR ICATIONSRETSI ETSI TS 146 002 V13.0.0 (20

2、16-01)13GPP TS 46.002 version 13.0.0 Release 13Reference RTS/TSGS-0446002vd00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfectur

3、e de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be mod

4、ified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

5、Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your c

6、omment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI

7、. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo a

8、re Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 146 002 V13.0.0 (

9、2016-01)23GPP TS 46.002 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be

10、 found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IP

11、R Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword Thi

12、s Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the correspondi

13、ng ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ ar

14、e to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 146 002 V13.0.0 (2016-01)33GPP TS 46.002 version 13.0.0 Release 13Co

15、ntents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 General . 6g35 Half rate speech transcoding 8g36 Half rate Discontinuous Transmission (DTX) . 8g37

16、 Half rate Voice Activity Detection (VAD) 9g38 Half rate comfort noise insertion 9g39 Half rate lost speech frame substitution and muting 9g310 Half rate codec homing 10g3Annex A (informative): Change History 11g3History 12g3ETSI ETSI TS 146 002 V13.0.0 (2016-01)43GPP TS 46.002 version 13.0.0 Releas

17、e 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it

18、 will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y t

19、he second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. The present document gives a general overview of the half rate speech traffic chan

20、nels speech processing functions for the digital cellular telecommunications system. The present document is part of ENs series covering the half rate speech traffic channels as described below: GSM 06.02 “Digital cellular telecommunications system (Phase 2+); Half rate speech; Half rate speech proc

21、essing functions“. GSM 06.20 “Digital cellular telecommunications system (Phase 2+); Half rate speech; Half rate speech transcoding“. GSM 06.21 “Digital cellular telecommunications system (Phase 2+); Half rate speech; Substitution and muting of lost frames for half rate speech traffic channels“. GSM

22、 06.22 “Digital cellular telecommunications system (Phase 2+); Half rate speech; Comfort noise aspects for half rate speech traffic channels“. GSM 06.41 “Digital cellular telecommunications system (Phase 2+); Half rate speech; Discontinuous Transmission (DTX) for half rate speech traffic channels“.

23、GSM 06.42 “Digital cellular telecommunications system (Phase 2+); Half rate speech; Voice Activity Detector (VAD) for half rate speech traffic channels“. GSM 06.06 “Digital cellular telecommunications system (Phase 2+); Half rate speech; ANSI-C code for the GSM half rate speech codec“. GSM 06.07 “Di

24、gital cellular telecommunications system (Phase 2+); Half rate speech; Test sequences for the GSM half rate speech codec“. ETSI ETSI TS 146 002 V13.0.0 (2016-01)53GPP TS 46.002 version 13.0.0 Release 131 Scope The present document is an introduction to GSM 06.20 4, GSM 06.21 5, GSM 06.22 6, GSM 06.4

25、1 7 and GSM 06.42 8 TSs dealing with the speech processing functions in the half-rate channel of the GSM system. A general overview of the speech processing functions is given, with reference to the TSs where each function is specified in detail. 2 References The following documents contain provisio

26、ns which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference

27、, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 GSM 01.04: “Digital cellular telecommunication system (Phase 2+); A

28、bbreviations and acronyms“. 2 GSM 03.50: “Digital cellular telecommunication system (Phase 2+); Transmission planning aspects of the speech services in the GSM Public Land Mobile Network (PLMN) system“. 3 GSM 05.03: “Digital cellular telecommunications system (Phase 2+); Channel coding“. 4 GSM 06.20

29、: “Digital cellular telecommunications system (Phase 2+); Half rate speech: Half rate speech transcoding“. 5 GSM 06.21: “ Digital cellular telecommunications system (Phase 2+); Half rate speech; Substitution and muting of lost frame for half rate speech traffic channels“. 6 GSM 06.22: “Digital cellu

30、lar telecommunications system (Phase 2+); Half rate speech; Comfort noise aspects for half rate speech traffic channels “. 7 GSM 06.41: “Digital cellular telecommunications system (Phase 2+); Half rate speech; Discontinuous transmission (DTX) for half rate speech traffic channels“. 8 GSM 06.42: “Dig

31、ital cellular telecommunications system (Phase 2+); Half rate speech; Voice Activity Detector (VAD) for half rate speech traffic channels “. 9 ITU-T Recommendation G.711: “Pulse Code Modulation (PCM) of voice frequencies“. 10 GSM 06.07: “Digital cellular telecommunications system (Phase 2+); Half ra

32、te speech; Test sequences for the GSM half rate speech codec“. 11 GSM 06.06: “Digital cellular telecommunications system (Phase 2+); Half rate speech; ANSI-C code for the GSM half rate speech codec“. 3 Definitions and abbreviations 3.1 Definitions Definition of terms used in the present document can

33、 be found in GSM 06.20 4, GSM 06.21 5, GSM 06.22 6, GSM 06.41 7 and GSM 06.42 8. ETSI ETSI TS 146 002 V13.0.0 (2016-01)63GPP TS 46.002 version 13.0.0 Release 133.2 Abbreviations For the purposes of the present document, the following abbreviations apply. BFI Bad Frame Indication BSS Base Station Sys

34、tem DTX Discontinuous Transmission GSM Global System for Mobile communications MS Mobile StationPCM Pulse Code Modulated PLMN Public Land Mobile Network PSTN Public Switched Telephone Network RF Radio Frequency RX Receive RSS Radio SubSystem SACCH Slow Associated Control CHannel SID SIlence Descript

35、or SP flag SPeech flag TAF Time Alignment Flag TX TransmitVSELP Vector Sum Excited Linear Predictor UFI Unreliable Frame Indication For abbreviations not given in this subclause, see GSM 01.04 1. 4 General Figure 1 presents a reference configuration where the various speech processing functions are

36、identified. In this figure, the relevant documents for each function are also indicated. In figure 1, the audio parts including analogue to digital and digital to analogue conversion are included, to show the complete speech path between the audio input/output in the Mobile Station (MS) and the digi

37、tal interface of the Public Switched Telephone Network (PSTN). The detailed specification of the audio parts are contained in GSM 03.50 2. These aspects are only considered to the extent that the performance of the audio parts affect the performance of the speech transcoder. ETSI ETSI TS 146 002 V13

38、.0.0 (2016-01)73GPP TS 46.002 version 13.0.0 Release 13BSS side only GSM 06.02MS side only GSM 03.5018 bit / A - law to 13 bit uniform267SPflaginfo.bitsTRANSMIT SIDESpeechencoder345GSM 06.42VADGSM 06.20Speech frameSID frameGSM 06.22GSM 06.41TX DTX handler6BSS side only GSM 06.02MS side only GSM 03.5

39、013 bit uniformto8 bit/A-lawRECEIVE SIDE245Speech frameSID frameGSM 06.41RX DTX handler89101112InfobitsBFISIDTAFUFIGSM 06.21GSM 06.20GSM 06.22Comfort noiseRX functionsSpeechframesubstitutionspeechdecoder1VoiceActivityDetectorA/DLPFComfort noiseTX functionsDTX controland operationDTX controland opera

40、tionD/A LPF1 8 bit /A-law or -law (PCS 1900) PCM (ITU-T Recommendation G.711) 9, 8 000 samples/s. 2 13 bit uniform PCM, 8 000 samples/s. 3 Voice Activity Detector (VAD) flag. 4 Encoded speech frame, 50 frames/s, 112 bits/frame. 5 SIlence Descriptor (SID) frame, 112 bits/frame. 6 SPeech (SP) flag, in

41、dicates whether information bits are speech or SID information. 7 Information bits delivered to the radio subsystem. 8 Information bits received from the radio subsystem. 9 Bad Frame Indication (BFl) flag. 10 SIlence Descriptor (SID) flag. 11 Time Alignment Flag (TAF), marks the position of the SID

42、frame within the Slow Associated Control CHannel (SACCH) multiframe. 12 Unreliable Frame Indication (UFI). Figure 1: Overview of audio processing functions ETSI ETSI TS 146 002 V13.0.0 (2016-01)83GPP TS 46.002 version 13.0.0 Release 135 Half rate speech transcoding The half rate speech transcoding f

43、unction is described in GSM 06.20 4. As shown in figure 1, the speech encoder takes its input as a 13 bit uniform Pulse Code Modulated (PCM) signal either from the audio part of the MS or on the network side, from the PSTN via an 8 bit/A-law or -law (PCS 1900) to 13 bit uniform PCM conversion. The e

44、ncoded speech at the output of the speech encoder is delivered to the channel coding function as defined in GSM 05.03 3 to produce an encoded block consisting of 228 bits leading to a gross bit rate of 11,4 kbit/s. In the RX direction, the inverse operations take place. GSM 06.20 4 describes the det

45、ailed mapping between input blocks of 160 speech samples in 13 bit uniform PCM format into encoded blocks of 112 bits and from encoded blocks of 112 bits to output blocks of 160 reconstructed speech samples. The sampling rate is 8 000 sample/s leading to an average bit rate for the encoded bit strea

46、m of 5,6 kbit/s. The coding scheme is called Vector Sum Excited Linear Prediction (VSELP) coding. GSM 06.20 4 describes the codec and GSM 06.06 11 defines the C code, thus enabling the verification of compliance to GSM 06.20 4 to a high degree of confidence by use of a set of digital test sequences

47、given in GSM 06.07 10. 6 Half rate Discontinuous Transmission (DTX) The half rate discontinuous transmission function is described in GSM 06.41 7. During a normal conversation, the participants alternate so that, on the average, each direction of transmission is occupied about 50 % of the time. Disc

48、ontinuous Transmission (DTX) is a mode of operation where the transmitters are switched on only for those frames which contain useful information. This may be done for the following two purposes: 1) in the MS, battery life will be prolonged or a smaller battery could be used for a given operational

49、duration; 2) the average interference level over the air interface is reduced, leading to better Radio Frequency (RF) spectrum efficiency. The overall DTX mechanism is implemented in the DTX handlers (Transmit (TX) and Receive (RX) described in GSM 06.41 7 and requires the following functions: - a Voice Activity Detector (VAD) on the TX side, see GSM 06.42 8; - evaluation of the background acoustic noise on the TX side, in order to transmit characteristic parameters to the RX side, see GSM 06.22 6