ETSI TS 151 017-2005 Digital cellular telecommunications system (Phase 2+) Subscriber Identity Module (SIM) test specification (3GPP TS 51 017 Version 4 2 0 Release 4)《数字蜂窝通信系统(第2+_1.pdf

1、 ETSI TS 151 017 V4.2.0 (2005-12)Technical Specification Digital cellular telecommunications system (Phase 2+); Subscriber Identity Module (SIM) test specification (3GPP TS 51.017 version 4.2.0 Release 4) GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSR1 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS 51.017

2、version 4.2.0 Release 4 Reference RTS/TSGC-0651017v420 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803

3、/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference versi

4、on is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of stat

5、us. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notificat

6、ion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2005. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for

7、the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. 2 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS

8、 51.017 version 4.2.0 Release 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR

9、 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR P

10、olicy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This T

11、echnical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding

12、ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp . 3 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS 51.017 version 4.2.0 Release 4 Contents Intellectual Property Rights2 Foreword.2 Foreword.9 1 Scope 10 2 Ref

13、erences 10 2.1 Normative references .10 3 Definitions and abbreviations.10 3.1 Definitions10 3.2 Abbreviations .11 4 Test environment11 4.1 Test equipment .11 4.1.1 ME simulator 11 4.1.2 Signal generation device.11 4.1.2.1 VCC 11 4.1.2.2 RST .11 4.1.2.3 CLK.12 4.1.2.4 IO 12 4.1.3 Precision force-ind

14、ucing contacting device 12 4.1.4 Temperature controllable environment.12 4.1.5 Temperature measuring device.12 4.1.6 Voltage measuring device.12 4.1.7 Precision measuring device.12 4.1.8 Current measuring device .13 4.1.9 Timing Measurements on contact IO13 4.2 IUT default conditions13 4.3 Default d

15、ata formatting 13 4.4 Test definition and applicability.13 4.5 Test procedure13 4.6 Test requirement.14 5 Test Group Hierarchy.14 5.1 Test groups under SIM .14 5.2 Test groups under PHY 15 5.3 Test groups under ELEC 15 5.4 Test groups under AFS.16 5.5 Test groups under SEC.16 5.6 Void17 5.7 Test gro

16、ups under CMD .17 5.8 Test groups under CEF.17 5.9 Test groups under APP.17 6 Test Procedure18 6.1 Physical characteristics.18 6.1.1 Format and layout .18 6.1.1.1 ID-1 SIM.18 6.1.1.1.1 Definition and applicability.18 6.1.1.1.2 Conformance requirement .18 6.1.1.1.3 Test purpose 18 6.1.1.1.4 Method of

17、 test19 6.1.1.2 Plug-in SIM.19 6.1.1.2.1 Definition and applicability.19 6.1.1.2.2 Conformance requirement .19 6.1.1.2.3 Test purpose 19 6.1.1.2.4 Method of test20 4 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS 51.017 version 4.2.0 Release 4 6.1.2 Temperature range for card operation.20 6.1.2.1 Def

18、inition and applicability.20 6.1.2.2 Conformance requirement.20 6.1.2.3 Test purpose 20 6.1.2.4 Method of test .21 6.1.3 Contacts 21 6.1.3.1 Definition and applicability.21 6.1.3.2 Conformance requirement.21 6.1.3.3 Test purpose 22 6.1.3.4 Method of test .22 6.2 Electronic signals and transmission p

19、rotocols22 6.2.1 Supply voltage Vcc (contact C1) 22 6.2.1.1 Voltage limits22 6.2.1.1.1 Definition and applicability.22 6.2.1.1.2 Conformance requirement .22 6.2.1.1.3 Test purpose 23 6.2.1.1.4 Method of test23 6.2.1.2 Current limits 23 6.2.1.2.1 Definition and applicability.23 6.2.1.2.2 Conformance

20、requirement .24 6.2.1.2.3 Test purpose 24 6.2.1.2.4 Method of test24 6.2.1.3 Idle current limits 25 6.2.1.3.1 Definition and applicability.25 6.2.1.3.2 Conformance requirement .25 6.2.1.3.3 Test purpose 25 6.2.1.3.4 Method of test25 6.2.1.3.5 Test requirement25 6.2.1.4 Current limits at all frequenc

21、ies 26 6.2.1.4.1 Definition and applicability.26 6.2.1.4.2 Conformance requirement .26 6.2.1.4.3 Test purpose 26 6.2.1.4.4 Method of test26 6.2.1.5 Current limits in clk-stop-mode 27 6.2.1.5.1 Definition and applicability.27 6.2.1.5.2 Conformance requirement .27 6.2.1.5.3 Test purpose 27 6.2.1.5.4 M

22、ethod of test27 6.2.2 Reset RST (contact C2) 27 6.2.2.1 Static operation .27 6.2.2.1.1 Definition and applicability.27 6.2.2.1.2 Conformance requirement .28 6.2.2.1.3 Test purpose 28 6.2.2.1.4 Method of test28 6.2.3 Clock CLK (contact C3) .29 6.2.3.1 Frequency and duty cycle29 6.2.3.1.1 Definition a

23、nd applicability.29 6.2.3.1.2 Conformance requirement .29 6.2.3.1.3 Test purpose 29 6.2.3.1.4 Method of test29 6.2.3.2 Voltage and current.30 6.2.3.2.1 Definition and applicability.30 6.2.3.2.2 Conformance requirement .30 6.2.3.2.3 Test purpose 30 6.2.3.2.4 Method of test30 6.2.4 I/O (contact C7) 31

24、 6.2.4.1 Voltage and current.31 6.2.4.1.1 Definition and applicability.31 6.2.4.1.2 Conformance requirement .31 6.2.4.1.3 Test purpose 32 6.2.4.1.4 Method of test32 6.2.5 States.33 5 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS 51.017 version 4.2.0 Release 4 6.2.5.1 Definition and applicability.33

25、6.2.5.2 Conformance requirement.33 6.2.5.3 Test purpose 33 6.2.5.4 Method of test .33 6.2.6 Answer To Reset (ATR) .34 6.2.6.1 ATR content34 6.2.6.1.1 Definition and applicability.34 6.2.6.1.2 Conformance requirement .34 6.2.6.1.3 Test purpose 34 6.2.6.1.4 Method of test34 6.2.6.2 PTS procedure.35 6.

26、2.6.2.1 Definition and applicability.35 6.2.6.2.2 Conformance requirement .35 6.2.6.2.3 Test purpose 35 6.2.6.2.4 Method of test35 6.2.7 Major Capabilities 36 6.2.7.1 Definition and applicability.36 6.2.7.2 Conformance requirement.36 6.2.7.3 Test purpose 36 6.2.7.4 Method of test .36 6.2.7.5 Test re

27、quirement .36 6.3 Application and File structure 36 6.3.1 File identifier 36 6.3.1.1 File-type identification36 6.3.1.1.1 Definition and applicability.36 6.3.1.1.2 Conformance requirement .37 6.3.1.1.3 Test purpose 37 6.3.1.1.4 Method of test37 6.3.1.2 File ID assignments.37 6.3.1.2.1 Definition and

28、 applicability.37 6.3.1.2.2 Conformance requirement .37 6.3.1.2.3 Test purpose 38 6.3.1.2.4 Method of test38 6.3.1.2.5 Test requirement38 6.3.2 Dedicated files 38 6.3.2.1 Definition and applicability.38 6.3.2.2 Conformance requirement.38 6.3.2.3 Test purpose 38 6.3.2.4 Method of test .38 6.3.3 Eleme

29、ntary files 39 6.3.3.1 Definition and applicability.39 6.3.3.2 Conformance requirement.39 6.3.3.3 Test purpose 39 6.3.3.4 Method of test .39 6.3.4 Methods for selecting a file.40 6.3.4.1 Definition and applicability.40 6.3.4.2 Conformance requirement.40 6.3.4.3 Test purpose 40 6.3.4.4 Method of test

30、 .40 6.3.5 Reservation of file IDs41 6.3.5.1 Definition and applicability.41 6.3.5.2 Conformance requirement.41 6.3.5.3 Test purpose 42 6.3.5.4 Method of test .42 6.4 Security features.42 6.4.1 Authentication and cipher key generation procedure42 6.4.2 File access conditions .43 6.4.2.1 Definition a

31、nd applicability.43 6.4.2.2 Conformance requirement.43 6.4.2.3 Test purpose 43 6.4.2.4 Method of test .43 6.5 Void44 6 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS 51.017 version 4.2.0 Release 4 6.6 Description of the commands.44 6.6.1 Mapping principles .44 6.6.1.1 Definition and applicability.44

32、6.6.1.2 Conformance requirement.44 6.6.1.3 Test purpose 44 6.6.1.4 Method of test .44 6.6.2 Coding of the commands 45 6.6.2.1 SELECT command .45 6.6.2.1.1 Definition and applicability.45 6.6.2.1.2 Conformance requirement .45 6.6.2.1.3 Test purpose 46 6.6.2.1.4 Method of test46 6.6.2.2 STATUS command

33、.48 6.6.2.2.1 Definition and applicability.48 6.6.2.2.2 Conformance requirement .48 6.6.2.2.3 Test purpose 48 6.6.2.2.4 Method of test48 6.6.2.3 READ BINARY command.49 6.6.2.3.1 Definition and applicability.49 6.6.2.3.2 Conformance requirement .49 6.6.2.3.3 Test purpose 49 6.6.2.3.4 Method of test50

34、 6.6.2.4 UPDATE BINARY command50 6.6.2.4.1 Definition and applicability.50 6.6.2.4.2 Conformance requirement .50 6.6.2.4.3 Test purpose 51 6.6.2.4.4 Method of test51 6.6.2.5 READ RECORD command51 6.6.2.5.1 Definition and applicability.51 6.6.2.5.2 Conformance requirement .51 6.6.2.5.3 Test purpose 5

35、2 6.6.2.5.4 Method of test52 6.6.2.6 UPDATE RECORD command .55 6.6.2.6.1 Definition and applicability.55 6.6.2.6.2 Conformance requirement .55 6.6.2.6.3 Test purpose 55 6.6.2.6.4 Method of test55 6.6.2.7 SEEK command59 6.6.2.7.1 Definition and applicability.59 6.6.2.7.2 Conformance requirement .59 6

36、.6.2.7.3 Test purpose 59 6.6.2.7.4 Method of test59 6.6.2.8 INCREASE command 61 6.6.2.8.1 Definition and applicability.61 6.6.2.8.2 Conformance requirement .61 6.6.2.8.3 Test purpose 61 6.6.2.8.4 Method of test61 6.6.2.9 VERIFY CHV command 62 6.6.2.9.1 Definition and applicability.62 6.6.2.9.2 Confo

37、rmance requirement .62 6.6.2.9.3 Test purpose 63 6.6.2.9.4 Method of test .63 6.6.2.10 CHANGE CHV command64 6.6.2.10.1 Definition and applicability.64 6.6.2.10.2 Conformance requirement .64 6.6.2.10.3 Test purpose 65 6.6.2.10.4 Method of test65 6.6.2.11 DISABLE CHV command66 6.6.2.11.1 Definition an

38、d applicability.66 6.6.2.11.2 Conformance requirement .66 6.6.2.11.3 Test purpose 67 6.6.2.11.4 Method of test67 7 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS 51.017 version 4.2.0 Release 4 6.6.2.12 ENABLE CHV command.68 6.6.2.12.1 Definition and applicability.68 6.6.2.12.2 Conformance requirement

39、 .68 6.6.2.12.3 Test purpose 68 6.6.2.12.4 Method of test68 6.6.2.13 UNBLOCK CHV command .70 6.6.2.13.1 Definition and applicability.70 6.6.2.13.2 Conformance requirement .70 6.6.2.13.3 Test purpose 70 6.6.2.13.4 Method of test70 6.6.2.14 INVALIDATE command72 6.6.2.14.1 Definition and applicability.

40、72 6.6.2.14.2 Conformance requirement .72 6.6.2.14.3 Test purpose 72 6.6.2.14.4 Method of test72 6.6.2.15 REHABILITATE command .73 6.6.2.15.1 Definition and applicability.73 6.6.2.15.2 Conformance requirement .73 6.6.2.15.3 Test purpose 73 6.6.2.15.4 Method of test73 6.6.2.16 RUN GSM ALGORITHM comma

41、nd .74 6.6.2.16.1 Definition and applicability.74 6.6.2.16.2 Conformance requirement .74 6.6.2.16.3 Test purpose 74 6.6.2.16.4 Method of test75 6.6.2.17 SLEEP command 75 6.6.2.17.1 Definition and applicability.75 6.6.2.17.2 Conformance requirement .75 6.6.2.17.3 Test purpose 75 6.6.2.17.4 Method of

42、test76 6.6.2.18 GET RESPONSE command .76 6.6.2.18.1 Definition and applicability.76 6.6.2.18.2 Conformance requirement .76 6.6.2.18.3 Test purpose 76 6.6.2.18.4 Method of test76 6.6.3 Definitions and coding77 6.6.3.1 Definition and applicability.77 6.6.3.2 Conformance requirement.77 6.6.3.3 Test pur

43、pose 77 6.6.3.4 Method of test .77 6.6.4 Status conditions returned by the SIM78 6.6.4.1 Coding of the status words78 6.6.4.1.1 Definition and applicability.78 6.6.4.1.2 Conformance requirement .78 6.6.4.1.3 Test purpose 78 6.6.4.1.4 Method of test78 6.6.4.2 Commands versus possible status responses

44、.79 6.6.4.2.1 Definition and applicability.79 6.6.4.2.2 Conformance requirement .80 6.6.4.2.3 Test purpose 80 6.6.4.2.4 Method of test80 6.6.4.2.5 Test requirement80 6.7 Contents of the elementary files .80 6.7.1 Definition and applicability 80 6.7.2 Conformance requirement 80 6.7.3 Test purpose81 6

45、.7.4 Method of test .81 6.8 Application Protocol.81 6.8.1 FDN Procedure .82 6.8.1.1 Definition and applicability.82 6.8.1.2 Conformance requirement.82 6.8.1.3 Test purpose 82 8 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS 51.017 version 4.2.0 Release 4 6.8.1.4 Method of test .82 Annex A (informativ

46、e): Change History 85 History 86 9 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS 51.017 version 4.2.0 Release 4 Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG

47、and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for informat

48、ion; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been inco

49、rporated in the document. 10 ETSI ETSI TS 151 017 V4.2.0 (2005-12) 3GPP TS 51.017 version 4.2.0 Release 4 1 Scope The present document provides the Conformance Test Specification for the Subscriber Identity Module defined in 3GPP TS 51.011 1, TS 11.0128 and TS 11.0189. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent rev