ETSI TS 152 021-2017 Digital cellular telecommunications system (Phase 2+) Network Management (NM) procedures and messages on the A-bis interface (V14 0 0 3GPP TS 52 021 version 14.pdf

1、 ETSI TS 152 021 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Network Management (NM) procedures and messages on the A-bis interface (3GPP TS 52.021 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 152 021 V14.0

2、.0 (2017-04)13GPP TS 52.021 version 14.0.0 Release 14Reference RTS/TSGR-0652021ve00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Pr

3、fecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not

4、be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secreta

5、riat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, pl

6、ease send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written pe

7、rmission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand

8、 the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 1

9、52 021 V14.0.0 (2017-04)23GPP TS 52.021 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-mem

10、bers, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuan

11、t to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present docume

12、nt. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to

13、 the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“

14、 and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 152 021 V14.0.0 (2017-04)33GPP TS 52.021 version 14.

15、0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g3Introduction 7g31 Scope 8g32 References 8g33 Definitions and abbreviations . 9g33.1 Definitions 9g33.2 Abbreviations . 9g34 Functional Split between BSC and BTS 9g35 Information Model . 10g3

16、5.1 Managed Objects 10g35.2 Addressing of Objects 13g35.3 State Management of Objects . 13g35.3.1 Administrative State . 13g35.3.2 Operational State and Availability Status . 14g36 Elementary Procedures . 15g36.1 Definition of the Procedures . 16g36.2 SW Download Management Procedures 16g36.2.1 Load

17、 Data Initiate . 16g36.2.2 Load Data Segment . 16g36.2.3 Load Data Abort . 17g36.2.4 Load Data End 17g36.2.5 SW Activate Request 17g36.2.6 Activate SW 18g36.2.7 SW Activated Report 18g36.3 A-bis Interface Management Procedures . 18g36.3.1 Establish TEI 18g36.3.2 Connect Terrestrial Signalling 18g36.

18、3.3 Disconnect Terrestrial Signalling . 19g36.3.4 Connect Terrestrial Traffic . 19g36.3.5 Disconnect Terrestrial Traffic . 19g36.4 Transmission Management Procedures 19g36.4.1 Connect Multi-drop Link 19g36.4.2 Disconnect Multi-drop Link . 20g36.5 Air Interface Management Procedures . 20g36.5.1 Set B

19、TS Attributes 20g36.5.2 Set Radio Carrier Attributes 20g36.5.3 Set Channel Attributes 20g36.6 Test Management Procedures . 21g36.6.1 Perform Test . 21g36.6.2 Test Report 21g36.6.3 Send Test Report . 21g36.6.4 Stop Test . 22g36.7 State Management and Event Report Procedures . 22g36.7.1 State Changed

20、Event Report . 22g36.7.2 Failure Event Report . 22g36.7.3 Stop Sending Event Reports . 23g36.7.4 Restart Sending Event Reports . 23g36.7.5 Change Administrative State 23g36.7.6 Change Administrative State Request. 23g3ETSI ETSI TS 152 021 V14.0.0 (2017-04)43GPP TS 52.021 version 14.0.0 Release 146.7

21、.7 Report Outstanding Alarms 24g36.8 Equipment Management Procedures 24g36.8.1 Change-over 24g36.8.2 Opstart 24g36.8.3 Reinitialize 24g36.8.4 Set Site Outputs 25g36.9 Measurement Management Procedures 25g36.9.1 Measurement Result Request 25g36.9.2 Measurement Result Response . 25g36.9.3 Stop Measure

22、ment 25g36.9.4 Start Measurement 26g36.10 Miscellaneous Procedures 26g36.10.1 Get Attributes 26g36.10.2 Set Alarm Threshold . 26g36.10.3 Get Attributes Response . 26g37 Structured Procedures. 26g38 Message Details 27g38.1 Message Categories 27g38.1.1 Formatted O 2 presented to TSG for approval; 3 or

23、 greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction (Ba

24、ckground) The use and general aspects of the A-bis interface are given in specification 3GPP TS 48.051. The split of telecommunications functions and management procedures between BSC and BTS are defined in specification 3GPP TS 48.052. Specification 3GPP TS 48.056 defines Layer 2 of the signalling

25、messages. The general aspects of NM are defined in specification GSM 12.00. Qx interface and protocol stack are defined in specification GSM 12.01. GSM 12.06 provides the functional requirements supported by the present document. The NM procedures and messages to support these operations over the A-

26、bis interface are specified here. Specification GSM 12.20 provides the information model as seen on the OMC-BSC interface. Interworking between this model and the NM messages and procedures provided here is specified in GSM 12.22. ETSI ETSI TS 152 021 V14.0.0 (2017-04)83GPP TS 52.021 version 14.0.0

27、Release 141 Scope The present document addresses the network management messages and procedures across the A-bis interface, which is defined as Qx in GSM. The information model included here defines the objects and how they are addressed for purposes of operations and maintenance activities. There i

28、s a requirement for the A-bis interface to be open to allow interoperation between BTSs of different manufacturers working to the same BSC. The present document addresses this requirement from O Core network protocols; Stage 3“. 4 3GPP TS 45.002: “Multiplexing and Multiple Access on the Radio Path“.

29、 5 3GPP TS 45.005: “Radio transmission and reception“. 6 3GPP TS 45.008: “Radio subsystem link control“. 7 3GPP TS 48.051: “Base Station Controller - Base Tranceiver Station (BSC-BTS) Interface General Aspects“. 8 3GPP TS 48.052: “Base Station Controller - Base Tranceiver Station (BSC-BTS) Interface

30、 - Interface Principles“. 9 3GPP TS 48.056: “BSC-BTS Layer 2 Specification“. 10 3GPP TS 48.058: “Base Station Controler - Base Transceiver Station (BCS-BTS) Interface Layer 3 Specification“. 11 GSM 12.00 (GSM Phase 2): “Objectives and structure of Network Management (NM)“. 12 GSM 12.01 (GSM Phase 2)

31、: “Common aspects of GSM Network Management (NM)“. 13 GSM 12.06 (GSM Phase 2): “GSM Network Configuration Management and Administration“. 14 GSM 12.20 (GSM Phase 2): “Base Station System (BSS) Management Information“. 15 GSM 12.22 (GSM Phase 2): “Interworking of GSM Network Management (NM) procedure

32、s and messages at the Base Station Controller (BSC)“. ETSI ETSI TS 152 021 V14.0.0 (2017-04)93GPP TS 52.021 version 14.0.0 Release 1416 ITU-T Recommendation X.731: “Information technology - Open Systems Interconnection - Systems Management: State management function“. 3 Definitions and abbreviations

33、 3.1 Definitions Definitions of terms used within the present document may be found mostly in clause5 in text context. 3.2 Abbreviations For the purpose of the present document, the following abbreviations apply: ASN.1 (CCITT) Abstract Syntax Notation One BSC Base Station Controller BSS Base Station

34、 System BTS Base Transceiver Station cont. continued HW Hardware LSB Least Significant Byte man. dep. manufacturer dependent (with upper and lower case adjusted as appropriate) MMI Man-machine Interface MSB Most Significant Byte MSC Mobile-services Switching Centre NE Network Element NM Network Mana

35、gement O req = request; X = Function exists; ex = execution - = Function non-exists; rpt = report 5 Information Model 5.1 Managed Objects The BCF mentioned in 3GPP TS 48.052 and 3GPP TS 48.056 is the agent at the BTS end of the A-bis O - operability: whether or not the resource is physically install

36、ed and working. The present document defines the following three state management attributes to represent the management state of a managed object: - administrative state; - operational state; - availability status (this elaborates the operational state). 5.3.1 Administrative State Administrative st

37、ates of the managed objects can be controlled only by the BSC. In fact, the control of resource usage comes from the MSC). ETSI ETSI TS 152 021 V14.0.0 (2017-04)143GPP TS 52.021 version 14.0.0 Release 14Setting the administrative state of a Channel to locked means that it has to discontinue all tran

38、smission and reception of information on Air interface and all telecommunication (traffic and signalling) information transmission on A-bis interface. Setting the administrative state of a Radio Carrier to locked means that it has to discontinue all RF emission on Air interface for the frequencies i

39、t is responsible. Setting the administrative state of a Baseband Transceiver to locked means that it has to discontinue all telecommunication tramissions and the Channels which are affected should indicate that they are Disabled or Degraded. Setting the administrative state of a BTS to locked means

40、it has to discontinue all RF emission on all Radio Carriers and all telecommunication transmissions on all Channels of all Baseband Transceivers, i.e., Radio Carriers, Channels and Baseband Transceivers are in Disabled, Dependency state. The administrative state at the BTS site is also used to provi

41、de information e.g., for a local MMI user at a BTS site. The locked state of a 12.21 managed object means that BSC has disconnected all the calls that go through the resource that is represented by the managed object. No new traffic is connected through this resource any more. The shutting down stat

42、e means that no new traffic is connected through this resource any more. The on-going calls remain. The unlocked state means that new traffic is allowed through the resource represented by the managed object. 5.3.2 Operational State and Availability Status ITU-T Recommendation X.731 gives the follow

43、ing definitions for the values of the operational state attribute: - disabled: the resource is totally inoperable and unable to provide service to the user(s); - enabled: the resource is partially or fully operable and available for use. In the present document the value Disabled represents the foll

44、owing conditions that the resources could have: - hardware or software is not installed; - power is turned off; - failure has occurred; - radio parameters has not yet been set by elementary procedures, therefore, the resource is off line. The availability status elaborates the operational state attr

45、ibute. In the present document the following values are used (availability status is a set value): In test: the resource is undergoing a test procedure. Failed: the resource has an internal fault that prevents it from operating. The operational state is disabled. Power off: the resource requires pow

46、er to be applied and is not powered on. The operational state is disabled. Off line: the resource requires some manual and/or automatic operation(s) to be performed to make it available for the use. Dependency: the resource cannot operate because some other resource on which it depends is unavailabl

47、e. The operational state is disabled. Degraded: the service available from the resource is degraded in some respect, such as in speed or operating capacity. The operational state is enabled. Not installed: the hardware or the software associated with the managed object has not been installed at the

48、site. Operational state is disabled. Figure 2 illustrates the operational state and availability status behaviour of GSM 12.21 objects (i.e., Site Manager, BTS, Radio Carrier, and Baseband Transceiver) during initialization. The initial value of the administrative state is locked. ETSI ETSI TS 152 0

49、21 V14.0.0 (2017-04)153GPP TS 52.021 version 14.0.0 Release 14Figure 2/GSM 12.21: GSM 12.21 Objects Operational state and availability status behaviour during initialization 6 Elementary Procedures The operational procedures applicable to the BTS consist of bringing BTS equipment and software into (or taking them out of) service, initiation of tests at the BTS, collection of test results made at the BTS, reporting and clearing of any BTS faults, and reporting of any BTS external alarms. Bringing into service of equipment at the BTS will include man