1、 ETSI TS 183 028 V2.5.0 (2008-06)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);Common Basic Communication procedures;Protocol specificationETSI ETSI TS 183 028 V2.5.0 (2008-06) 2 Reference RTS/TISPAN-03162-NGN-R2 Keywords bas
2、ic, procedure, protocol ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of th
3、e present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In
4、 case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of thi
5、s and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as auth
6、orized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2008. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for th
7、e benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 183 028 V2.5.0 (2008-06) 3 Contents Intellectual Property Rights4 Foreword.4 1 Scope 5 2 References 5 2.1 Normative references .5 2.2 Informative r
8、eferences6 3 Definitions and abbreviations.6 3.1 Definitions6 3.2 Abbreviations .6 4 Common basic communication procedures6 Annex A (informative): Signalling flows for announcements.7 Annex B (informative): Signalling flows for Network Determined User Busy (NDUB)8 Annex C (normative): Void .9 Annex
9、D (normative): Application Server (AS) establishing multiple dialogs with originating UE10 Annex E (informative): Signalling flows for 3rdparty call control 11 Annex F (informative): Bibliography.12 History 13 ETSI ETSI TS 183 028 V2.5.0 (2008-06) 4 Intellectual Property Rights IPRs essential or pot
10、entially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essentia
11、l, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No
12、guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Telecomm
13、unications and Internet converged Services and Protocols for Advanced Networking (TISPAN). ETSI ETSI TS 183 028 V2.5.0 (2008-06) 5 1 Scope The present document describes the stage three protocol for basic communication procedures common to several services when at least one Application Server (AS) i
14、s included in the communication. The common procedures are based on stage three specifications for services. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not
15、apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referen
16、ced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced documen
17、t should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use o
18、f upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For
19、 dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 Void. 2 Void. 3 Void. 4 Void. 5 Void. 6 Void. 7 Void. 8 Void. 9 Void. 10 Void. 11 Void. ETSI ETSI TS 183 028 V2.5.0 (2008-06) 6 12 Void.
20、 13 Void. 14 Void. 15 Void. 16 ETSI TS 124 528: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); TISPAN; Common Basic Communication procedures; Protocol specification (3GPP TS 24.528 Release 8)“. 2.2 Informative references The following refer
21、enced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. i.1 Void. 3 Definitions and abbreviations 3.1 Definit
22、ions For the purposes of the present document, the terms and definitions given in TS 124 528 16 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TS 124 528 16 apply. 4 Common basic communication procedures The provisions of the present document are contai
23、ned in TS 124 528 16. ETSI ETSI TS 183 028 V2.5.0 (2008-06) 7 Annex A (informative): Signalling flows for announcements Information is contained in TS 124 528 16. ETSI ETSI TS 183 028 V2.5.0 (2008-06) 8 Annex B (informative): Signalling flows for Network Determined User Busy (NDUB) Information is co
24、ntained in TS 124 528 16. ETSI ETSI TS 183 028 V2.5.0 (2008-06) 9 Annex C (normative): Void ETSI ETSI TS 183 028 V2.5.0 (2008-06) 10Annex D (normative): Application Server (AS) establishing multiple dialogs with originating UE The provisions of the present document are contained in TS 124 528 16. ET
25、SI ETSI TS 183 028 V2.5.0 (2008-06) 11Annex E (informative): Signalling flows for 3rdparty call control Information is contained in TS 124 528 16. ETSI ETSI TS 183 028 V2.5.0 (2008-06) 12Annex F (informative): Bibliography Information is contained in TS 124 528 17. ETSI ETSI TS 183 028 V2.5.0 (2008-06) 13History Document history V2.4.0 January 2008 Publication V2.5.0 June 2008 Publication
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1