ETSI TS 186 007-1-2015 Core Network and Interoperability Testing (INT) Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem Conformance test specification.pdf

1、 ETSI TS 186 007-1 V2.1.1 (2015-10) Core Network and Interoperability Testing (INT); Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification (3GPP Release 10); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATION

2、ETSI ETSI TS 186 007-1 V2.1.1 (2015-10)2Statement (PICS)Reference RTS/INT-00124-1 Keywords HOLD, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif en

3、registre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present

4、document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive

5、within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present doc

6、ument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by w

7、ritten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM,

8、UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI

9、ETSI TS 186 007-1 V2.1.1 (2015-10)3Statement (PICS)Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbr

10、eviations . 6g34 Conformance to this PICS pro forma specification 6g34.0 Introduction 6g34.1 Guidance for completing the PICS pro forma 6g34.1.1 Purposes and structure 6g34.1.2 Abbreviations and conventions . 7g34.1.3 Instructions for completing the PICS pro forma . 7g34.2 Identification of the impl

11、ementation 8g34.2.0 Introduction. 8g34.2.1 Date of the statement 8g34.2.2 Implementation Under Test (IUT) identification 8g34.2.3 System Under Test (SUT) identification 8g34.2.4 Product supplier 8g34.2.5 Client (if different from product supplier) 9g34.2.6 PICS contact person 9g34.3 Identification o

12、f the ETSI TS 124 610 . 10g34.4 Global statement of conformance . 10g34.5 Roles . 10g34.6 User role . 10g34.6.0 Introduction. 10g34.6.1 Major capabilities . 10g34.7 Network role . 11g34.7.0 Introduction. 11g34.7.1 Major capabilities . 11g3History 12g3ETSI ETSI TS 186 007-1 V2.1.1 (2015-10)4Statement

13、 (PICS)Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual P

14、roperty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR se

15、arches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been prod

16、uced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering the Conformance Test Specification of Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Pr

17、otocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.610 Release 10)“. 2 ETS

18、I ETS 300 406 (1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concep

19、ts“. 4 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 5 IETF RFC 3264: “An Offer/Answer Model with the Session Description Protocol (SDP)“. 2.2 Informative references References

20、are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hype

21、rlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. ET

22、SI ETSI TS 186 007-1 V2.1.1 (2015-10)6Statement (PICS)3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 124 610 1, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4 and the following apply: In particular, the following terms and def

23、initions defined in ISO/IEC 9646-1 3 apply: Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented. The ICS can take several forms: protocol ICS, profile I

24、CS, profile specific ICS, information object ICS, etc. ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS. Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification. NOTE: Th

25、is may contain additional information. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 610 1 and the following apply: ICS Implementation Conformance Statement IUT Implementation Under Test SCS System Conformance Statement SUT System Under Test PICS

26、Protocol ICS 4 Conformance to this PICS pro forma specification 4.0 Introduction If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma given in clause 4, and shall preserve the number

27、ing/naming and ordering of the pro forma items. A PICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance with the guidance for completion given in clause 4.1. 4.1 Guidance for completing the PICS pro forma 4.1.1 Purposes and structure The purpose of

28、this PICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 124 610 1 may provide information about the implementation in a standardized manner. The PICS pro forma is subdivided into clauses for the following categories of information:

29、 - guidance for completing the PICS pro forma; - identification of the implementation; - identification of the ; - global statement of conformance; - roles; ETSI ETSI TS 186 007-1 V2.1.1 (2015-10)7Statement (PICS)- user role; - major capabilities; - network role; - major capabilities; 4.1.2 Abbrevia

30、tions and conventions The PICS pro forma contained in this clause is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. Item description column The item descri

31、ption column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supp

32、orted. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. Reference column The reference column makes reference to ETSI TS 124 610 1, except where explicitly stated otherwise. Support column The support column shall

33、 be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a,

34、directly or after evaluation of a conditional status). Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. 4.1.3 Instructi

35、ons for completing the PICS pro forma The supplier of the implementation shall complete the PICS pro forma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support column boxes provided, using the notation described in clause 4.1.2. However, the tabl

36、es containing in “user role“ clause shall only be completed for user implementations, and the tables containing in “network role“ clause shall only be completed for network implementations. If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately.

37、 More detailed instructions are given at the beginning of the different clauses of the PICS pro forma. ETSI ETSI TS 186 007-1 V2.1.1 (2015-10)8Statement (PICS)4.2 Identification of the implementation 4.2.0 Introduction Identification of the Implementation Under Test (IUT) and the system in which it

38、resides (the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regarding

39、information supplied in the ICS should be named as the contact person. 4.2.1 Date of the statement . 4.2.2 Implementation Under Test (IUT) identification IUT name: . . IUT version: . 4.2.3 System Under Test (SUT) identification SUT name: . . Hardware configuration: . . . Operating system: . 4.2.4 Pr

40、oduct supplier Name: . Address: . . . Telephone number: . ETSI ETSI TS 186 007-1 V2.1.1 (2015-10)9Statement (PICS)Facsimile number: . E-mail address: . Additional information: . . . 4.2.5 Client (if different from product supplier) Name: . Address: . . . Telephone number: . Facsimile number: . E-mai

41、l address: . Additional information: . . 4.2.6 PICS contact person (A person to contact if there are any queries concerning the content of the PICS) Name: . Telephone number: . Facsimile number: . E-mail address: . ETSI ETSI TS 186 007-1 V2.1.1 (2015-10)10Statement (PICS)Additional information: . .

42、. 4.3 Identification of the ETSI TS 124 610 This PICS pro forma applies to the following standard: ETSI TS 124 610 1:. 4.4 Global statement of conformance Are all mandatory capabilities implemented? (Yes/No) . NOTE: Answering “No“ to this question indicates non-conformance to the specification. Non-

43、supported mandatory capabilities are to be identified in the PICS, with an explanation of why the implementation is non-conforming, on pages attached to the PICS pro forma. 4.5 Roles Table 4.1: Roles Item Item description Reference Status Support 1 User 4.5.2.1/ 1 o.12 Network 4.5.2.4/ 1 o.1o.1: It

44、is mandatory to support exactly one of these items. Comments: 4.6 User role 4.6.0 Introduction This clause contains the PICS pro forma tables related to the user role. They need to be completed only for user implementations: Prerequisite: 4.1/1 - user role 4.6.1 Major capabilities Table 4.2: User re

45、lated requirements and options Item Item description Reference Status Support 1 Does the User Equipment supports the hold and resume of media streams in the early dialogue? 5 o 2 Does the User Equipment supports the hold and resume of media streams using the UPDATE method in the confirmed dialogue?

46、4.5.2.1/ 1 o Comments: ETSI ETSI TS 186 007-1 V2.1.1 (2015-10)11Statement (PICS)4.7 Network role 4.7.0 Introduction This clause contains the PICS pro forma tables related to the Network role. They need to be completed only for network implementations: Prerequisite: 4.1/2 - network role 4.7.1 Major c

47、apabilities Table 4.3: Network related requirements and options Item Item description Reference Status Support 1 Does the network support the hold and resume of media streams in the early dialogue? 5 o 2 Does the network support the hold and resume of media streams using the UPDATE method in the con

48、firmed dialogue? 4.5.2.1/ 1 o 3 Does the AS of the invoking UE initiate the procedures for the provision of an announcement to the held user? 4.5.2.4/ 1 o 4 Does the AS of the invoking UE supports for each media stream marked “recvonly“ lower the bandwidth by setting the “b=AS:“ parameter to a small

49、 value? 4.5.2.4/ 1 o 5 Does the AS of the invoking UE supports for each media stream marked “inactive“ lower the bandwidth by setting the “b=AS:“ parameter to a small value? 4.5.2.4/ 1 o Comments: ETSI ETSI TS 186 007-1 V2.1.1 (2015-10)12Statement (PICS)History Document history V2.1.1 October 2015 Publication