ETSI TS 186 009-1-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) SIP-ISUP Interworking between the IP Multimedia (IM) Core N.pdf

1、 ETSI TS 186 009-1 V2.1.1 (2009-03)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);SIP-ISUP Interworking between theIP Multimedia (IM) Core Network (CN) subsystemand Circuit Switched (CS) networks;Part 1: Protocol Implementatio

2、n ConformanceStatement (PICS)ETSI ETSI TS 186 009-1 V2.1.1 (2009-03)2Reference DTS/TISPAN-06025-1-NGN-R2 Keywords interworking, ISUP, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF

3、742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of ex

4、isting or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present do

5、cument should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the fo

6、llowing services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. All ri

7、ghts reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI cur

8、rently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 009-1 V2.1.1 (2009-03)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g3

9、2.1 Normative references . 5g32.2 Informative references 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 8g34 Scenarios 8g34.1 SIP Profile A and B for interworking between SIP and BICC/ISUP . 8g34.2 SIP Profile C for Interworking Between SIP with MIME Encoding of ISUP

10、and BICC/ISUP . 9g35 PICS proforma 11g35.1 Instructions for completing the PICS proforma 11g35.1.1 Other information . 11g35.1.2 Purposes and structure 12g35.1.3 Conventions 12g35.2 Identification of the implementation 13g35.2.1 Date of the statement 13g35.2.2 Implementation Under Test (IUT) identif

11、ication 13g35.2.3 System Under Test (SUT) identification 13g35.2.4 Product supplier 14g35.2.5 Client 14g35.2.6 PICS contact person 14g35.3 PICS proforma tables . 14g35.3.1 Global statement of conformance . 14g35.3.2 Roles . 14g35.3.3 Connection types 15g35.3.4 Forward address signalling . 15g35.3.5

12、Role independent capabilities . 15g35.3.6 Supplementary Services Major Capabilities . 17g35.3.7 IMS simulation services 19g35.3.8 Timers . 20g35.4 Additional information for PICS 20g3Annex A (informative): Bibliography . 21g3History 23g3ETSI ETSI TS 186 009-1 V2.1.1 (2009-03)4Intellectual Property R

13、ights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essenti

14、al, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has be

15、en carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI T

16、echnical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 1 of a multi-part deliverable covering the Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Interworkin

17、g between Session Initiation Protocol (SIP) and Bearer Independent Call Control Protocol (BICC) or ISDN User Part (ISUP), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and p

18、artial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“; ETSI ETSI TS 186 009-1 V2.1.1 (2009-03)51 Scope The present document specifies the network PICS (Protocol Implementation Conformance Statement) of the Interworking between Session Initiation Protocol (SIP)

19、and Bearer Independent Call Control Protocol or ISDN User Part EN 283 027 20. The references 20 and 26 are identical. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identifi

20、ed by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might

21、be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present docum

22、ent. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ITU-T Recommendations Q.761 to Q.764 (2000): “Signalling System No.7 ISDN User Part (ISUP)“. 2 ITU-T Recommendation Q.731.7 (199

23、7): “Stage 3 description for number identification supplementary services using Signalling System No. 7: Malicious call identification (MCID)“. 3 ITU-T Recommendation Q.732.2 (1999): “Stage 3 description for call offering supplementary services using Signalling System No. 7: Call diversion services“

24、. 4 ITU-T Recommendation Q.732.7 (1996): “Stage 3 description for call offering supplementary services using Signalling System No. 7: Explicit Call Transfer“. 5 ITU-T Recommendation Q.737.1 (1997): “Stage 3 description for additional information transfer supplementary services using Signalling Syste

25、m No. 7: User-to-user signalling (UUS)“. 6 IETF RFC 3261 (2002): “SIP: Session Initiation Protocol“. 7 IETF RFC 3262 (2002): “Reliability of Provisional Responses in the Session Initiation Protocol (SIP)“. 8 ISO/IEC 9646-7 (1995): “Conformance testing methodology and framework - Part 7: Implementati

26、on Conformance Statements“. 9 ETSI EN 383 001: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control (BICC) Protocol or ISDN User Part (ISUP) ITU-T Recommendation

27、Q.1912.5, modified“. 10 ITU-T Recommendation Q.1912.5 (03/2004): “Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control or ISDN User Part“. ETSI ETSI TS 186 009-1 V2.1.1 (2009-03)611 ITU-T Recommendation E.164 (2005): “The international public telecommunication n

28、umbering plan“. 12 IETF RFC 768 (1980): “User Datagram Protocol“. 13 IETF RFC 761 (1980): “DoD standard Transmission Control Protocol“. 14 ITU-T Recommendation Q.767 (1991): “Application of the ISDN user part of CCITT signalling system No. 7 for international ISDN interconnections“. 15 ITU-T Recomme

29、ndation Q.731.1 (1996): “Stage 3 description for number identification supplementary services using Signalling System No. 7: Direct-dialling-In (DDI)“. 16 ITU-T Recommendation Q.731.5 (1993): “Stage 3 description for number identification supplementary services using Signalling System No. 7: Connect

30、ed line identification presentation (COLP)“. 17 ITU-T Recommendation Q.118 (1997): “Abnormal conditions - Special release arrangements“. 18 ITU-T Technical Report TRQ.2815 / Q.Sup45 (2003): “Requirements for interworking BICC/ISUP network with originating/destination networks based on Session Initia

31、tion Protocol and Session Description Protocol“. 19 ITU-T Recommendation Q.1902.4: “Bearer Independent Call Control protocol (Capability Set 2): Basic call procedures“. 20 ETSI ES 283 027 (V2.5.1): “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) End

32、orsement of the SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks 3GPP TS 29.163 (Release 7), modified“. 21 ETSI TS 183 008: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN

33、 simulation services Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR); Protocol specification“. 22 ETSI TS 183 010: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); NGN Signalling Control Protocol; Commu

34、nication HOLD (HOLD) PSTN/ISDN simulation services; Protocol specification“. 23 ETSI TS 183 029: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services: Explicit Communication Transfer (ECT); Protocol specification“. 24 ETSI

35、TS 183 005: Telecommunications and Internet Converged Services and Protocols for Advanced Networking (TISPAN); NGN Signalling Control Protocol; Conference (CONF) PSTN/ISDN simulation services. 25 ETSI TS 183 004: “Telecommunications and Internet converged Services and Protocols for Advanced Networki

36、ng (TISPAN); PSTN/ISDN simulation services: Communication Diversion (CDIV); Protocol specification“. 26 ETSI TS 129 527 (V8.2.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); TISPAN; Endorsement of the SIP-ISUP Interworking between the IP

37、 Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks 3GPP TS 29.163 (Release 7), modified (3GPP TS 29.527 version 8.2.0 Release 8)“. 27 ITU-T Recommendation Q.1902.2: “Bearer Independent Call control protocol (Capability Set 2) and Signalling System No.7 ISDN User Part: Ge

38、neral functions of messages and parameters“. 28 IETF RFC 3267: “Real-Time Transport Protocol (RTP) Payload Format and File Storage Format for the Adaptive Multi-Rate (AMR) and Adaptive Multi-Rate Wideband (AMR-WB) Audio Codecs“. 29 ITU-T Recommendation Q.730: “ISDN user part supplementary services“.

39、 ETSI ETSI TS 186 009-1 V2.1.1 (2009-03)730 IETF RFC 3264: “An Offer/Answer Model with the Session Description Protocol (SDP)“. 31 ITU-T Recommendation Q.731.3: “Stage 3 description for number identification supplementary services using Signalling System No. 7 : Calling line identification presentat

40、ion (CLIP)“. 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) app

41、lies. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Abstract Test Case (ATC): complete and independent specification of the actions required to achieve a specific test purpose, defined at the level

42、 of abstraction of a particular Abstract Test Method, starting in a stable testing state and ending in a stable testing state Abstract Test Method (ATM): description of how an SUT is to be tested, given at an appropriate level of abstraction to make the description independent of any particular real

43、ization of a Means of Testing, but with enough detail to enable abstract test cases to be specified for this method Abstract Test Suite (ATS): test suite composed of abstract test cases Implementation Under Test (IUT): implementation of one or more OSI protocols in an adjacent user/provider relation

44、ship, being part of a real open system which is to be studied by testing Means of Testing (MOT): combination of equipment and procedures that can perform the derivation, selection, parameterization and execution of test cases, in conformance with a reference standardized ATS, and can produce a confo

45、rmance log PICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes the PICS PIXIT proforma: document, in the form of a questionnaire, which when completed for the SUT becomes the PIXIT Point of Control and Observation (PCO): point within

46、a testing environment where the occurrence of test events is to be controlled and observed, as defined in an Abstract Test Method pre-test condition: setting or state in the SUT which cannot be achieved by providing stimulus from the test environment Protocol Implementation Conformance Statement (PI

47、CS): statement made by the supplier of a protocol claimed to conform to a given specification, stating which capabilities have been implemented Protocol Implementation eXtra Information for Testing (PIXIT): statement made by a supplier or implementor of an SUT (protocol) which contains or references

48、 all of the information related to the SUT and its testing environment, which will enable the test laboratory to run an appropriate test suite against the SUT SIP number: number conforming to the numbering and structure specified in ITU-T Recommendation E.164 11 System Under Test (SUT): real open sy

49、stem in which the SUT resides user: access protocol entity at the User side of the user-network interface where a T reference point or coincident S and T reference point applies ETSI ETSI TS 186 009-1 V2.1.1 (2009-03)83.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ATC Abstract Test Case ATM Abstract Test Method ATS Abstract Test Suite BICC Bearer Independent Call Control protocol CIC Circuit Identification Code ICS Implementation Conformance Statem