ETSI TS 186 010-1-2017 Core Network and Interoperability Testing (INT) Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem Conformance test specification (3GPP R_1.pdf

1、 ETSI TS 186 010-1 V4.1.1 (2017-12) Core Network and Interoperability Testing (INT); Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification; (3GPP Release 12); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATION ETSI ET

2、SI TS 186 010-1 V4.1.1 (2017-12)2 Reference RTS/INT-00145-1 Keywords CONF, conformance, IMS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre

3、la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document

4、shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ET

5、SI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present do

6、cument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by

7、written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of

8、ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Associ

9、ation. ETSI ETSI TS 186 010-1 V4.1.1 (2017-12)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbrevi

10、ations . 6g34 Conformance to this PICS pro forma specification 6g34.0 Introduction 6g34.1 Guidance for completing the PICS pro forma 6g34.1.1 Purposes and structure 6g34.1.2 Abbreviations and conventions . 7g34.1.3 Instructions for completing the PICS pro forma . 8g34.2 Identification of the impleme

11、ntation 8g34.2.0 Introduction. 8g34.2.1 Date of the statement 8g34.2.2 Implementation Under Test (IUT) identification 8g34.2.3 System Under Test (SUT) identification 8g34.2.4 Product supplier 9g34.2.5 Client (if different from product supplier) 9g34.2.6 PICS contact person 10g34.3 Identification of

12、the ETSI TS 124 605 . 10g34.4 Global statement of conformance . 10g34.5 Roles . 11g34.6 User role . 11g34.6.0 Introduction. 11g34.6.1 Major capabilities . 11g34.7 Network role . 11g34.7.0 Introduction. 11g34.7.1 Major capabilities . 12g3History 13g3ETSI ETSI TS 186 010-1 V4.1.1 (2017-12)4 Intellectu

13、al Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual

14、Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR

15、 searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademark

16、s and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document d

17、oes not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part

18、deliverable covering the conformance test specification of Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (A

19、TS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause

20、3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabiliti

21、es and options have been implemented for a telecommunication specification. Such a statement is called an Implementation Conformance Statement (PICS). ETSI ETSI TS 186 010-1 V4.1.1 (2017-12)5 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for

22、 the Conference (CONF) service based on stage one and two of the ISDN CONF supplementary service defined in ETSI TS 124 605 1 in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 4 and ETSI ETS 300 406 2. 2 References 2.1 Normative refere

23、nces References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Ref

24、erenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenc

25、ed documents are necessary for the application of the present document. 1 ETSI TS 124 605 (V12.5.0) (04-2015): “ Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Prot

26、ocol specification (3GPP TS 24.605 version 12.5.0 Release 12)“. 2 ETSI ETS 300 406 (1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open systems interconnection - C

27、onformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 5 ETSI TS 124 147: “ Digital cellular telecommunication

28、s system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Conferencing using the IP Multimedia (IM) Core Network (CN) subsystem; Stage 3 (3GPP TS 24.147 Release 12)“. 6 ETSI TS 124 628: “ Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommu

29、nications System (UMTS); LTE; Common Basic Communication procedures using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.628 Release 12)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version

30、 number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guar

31、antee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. ETSI ETSI TS 186 010-1 V4.1.1 (2017-12)6 3 Definitions and abbreviations 3.1 Definitions

32、 For the purposes of the present document, the terms and definitions given in ETSI TS 124 605 1, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4 and the following apply: ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Implementation Con

33、formance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. Pr

34、otocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification NOTE: This may contain additional information. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 605 1 and the following apply: ICS Implementat

35、ion Conformance Statement IUT Implementation Under Test SUT System Under Test PICS Protocol ICS 4 Conformance to this PICS pro forma specification 4.0 The right to copy Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the p

36、resent document may freely reproduce the ICS proforma in this clause so that it can be used for its intended purposes and may further publish the completed ICS. 4.1 Guidance for completing the PICS pro forma 4.1.0 Introduction If it claims to conform to the present document, the actual PICS pro form

37、a to be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma given in clause 4, and shall preserve the numbering/naming and ordering of the pro forma items. A PICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance

38、 with the guidance for completion given in clause 4.1. 4.1.1 Purposes and structure The purpose of this ICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 124 605 1 may provide information about the implementation in a standardized

39、manner. ETSI ETSI TS 186 010-1 V4.1.1 (2017-12)7 The ICS pro forma is subdivided into clauses for the following categories of information: guidance for completing the PICS pro forma; identification of the implementation; identification of the ; global statement of conformance; roles; user role: - ma

40、jor capabilities; network role: - major capabilities. 4.1.2 Abbreviations and conventions The ICS pro forma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identif

41、ies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the

42、status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an

43、 integer which identifies an unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an

44、integer identifying an unique conditional status expression which is defined immediately following the table. Reference column The reference column makes reference to ETSI TS 124 605 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of

45、the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. ETSI ETSI TS 186 010-1 V4.1.1 (2017-12)8 N/A, n/a or - no answer required (allowed only if the status

46、is n/a, directly or after evaluation of a conditional status). Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. 4.1.3 I

47、nstructions for completing the PICS pro forma The supplier of the implementation shall complete the PICS pro forma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support column boxes provided, using the notation described in clause 4.1.2. However,

48、the tables containing in “user role“ clause shall only be completed for user implementations, and the tables containing in “network role“ clause shall only be completed for network implementations. If necessary, the supplier may provide additional comments in space at the bottom of the tables or sep

49、arately. More detailed instructions are given at the beginning of the different clauses of the ICS pro forma. 4.2 Identification of the implementation 4.2.0 Introduction Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can answ