ETSI TS 186 010-3-2012 IMS Network Testing (INT) Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem Conformance Testing Part 3 Abstract Test Suite (ATS) and par_1.pdf

1、 ETSI TS 186 010-3 V3.1.1 (2012-01) IMS Network Testing (INT); Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Testing; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification floppy3Techni

2、cal Specification ETSI ETSI TS 186 010-3 V3.1.1 (2012-01)2Reference DTS/INT-00027-3 Keywords ATS, CONF, IMS, PIXIT, SIP, testing, TTCN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association

3、but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceive

4、d difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be a

5、ware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services:

6、http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2012. All rights reserved. DEC

7、TTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM

8、 Association. ETSI ETSI TS 186 010-3 V3.1.1 (2012-01)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Abstract Test Method (A

9、TM) . 6g34.1 Configurations for testing UE 6g35 The ATS development process . 7g35.1 Requirements and Test Purposes 7g35.1.1 Untestable test purposes 7g35.2 ATS structure . 7g35.2.1 Test case grouping 7g35.2.2 Test case identifiers 8g35.3 ATS specification framework . 8g35.3.1 ATS Library 8g35.3.2 U

10、se of TTCN-3 . 9g3Annex A (normative): Partial PIXIT proforma 10g3A.1 Introduction 10g3A.2 PIXIT items 10g3A.2.1 PIXIT for UE Testing . 10g3A.2.2 PIXIT for AS Testing . 11g3A.2.3 General PIXIT 11g3A.2.4 CONF specific PIXIT . 11g3Annex B (informative): TTCN-3 library modules . 12g3B.1 Electronic anne

11、x, zip file with TTCN-3 code 12g3Annex C (informative): Validation Report 13g3C.1 Test Suite Validation Level 13g3C.2 TTCN-3 Edition . 13g3C.3 TTCN-3 Tool(s) . 13g3C.3.1 TTCN-3 Tool ElviorTestCast 13g3C.3.1.1 Identification of the TTCN-3 Tool ElviorTestCast 13g3C.3.1.2 Compilation status 13g3C.3.2 T

12、TCN-3 Tool EricssonTitan 13g3C.3.2.1 Identification of the TTCN-3 Tool EricssonTitan . 13g3C.3.2.2 Compilation status 13g3C.3.3 TTCN-3 Tool Testing Technologies TTWorkbench14g3C.3.3.1 Identification of the TTCN-3 Tool Testing Technologies TTWorkbench14g3C.3.3.2 Compilation status 14g3C.3.4 Test Plat

13、form(s) 14g3History 15g3ETSI ETSI TS 186 010-3 V3.1.1 (2012-01)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-memb

14、ers, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant t

15、o the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document.

16、 Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee IMS Network Testing (INT). The present document is part 3 of a multi-part deliverable covering Conference (CONF), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Te

17、st Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. ETSI ETSI TS 186 010-3 V3.1.1 (2012-01)51 Scope The present document specifies the Abstract Test Suite (ATS) and partial Pro

18、tocol Implementation eXtra Information for Testing (PIXIT) proforma based on the Test Suite Structure and Test Purposes defined in TS 186 010-2 2. The test notation used in the ATS is TTCN-3 (see ES 201 873-1 7). The following test specification- and design considerations can be found in the body of

19、 the present document: the overall test suite structure; the testing architecture; the test methods and port definitions; the test configurations; the design principles, assumptions, and used interfaces to the TTCN3 tester (System Simulator); TTCN styles and conventions; the partial PIXIT proforma;

20、the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Proforma of the ATS. Annex B provides the Testing and Test Control Notation (TTCN-3) part of the ATS. 2 References References are either specific (identified by date of publicatio

21、n and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the

22、expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application

23、 of the present document. 1 ETSI TS 124 605: “Digital cellular telecommunications system (Phase 2+);Universal Mobile Telecommunications System (UMTS); Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.605 version 8.3.0 Release 8)“. 2 ETSI TS 1

24、86 010-2 (V3.1.1): “Technical Committee for IMS Network Testing (INT); Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Testing; Part 2: Test Suite Structure and Test Purposes (TSS Network Integration Testing; IMS specific use of Session Initiation Protocol (SIP) a

25、nd Session Description Protocol (SDP); Conformance Testing; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. 4 IETF RFC 3261 (2002): “SIP: Session Initiation Protocol“. ETSI ETSI TS 186 010-3 V3.1.1 (2012-01)65 ISO/I

26、EC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance

27、 Statements“. 7 ETSI ES 201 873-1 (V4.3.1): “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 8 ETSI TS 102 351 (V2.1.1): “Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Testing: Methodolo

28、gy and Framework“. 9 ETSI TS 102 587-2: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 2: Conformance testing; Test Suite Structure and Test Purposes (TSS they are based on the names provided in clause 4 of TS 186 010-2 2, but use the

29、 naming conventions defined for the ATS (see clause 5.2.2). Table 1: CONF ATS structure ConferenceFocus CreateConf CONF_N01_xxx JoinConf CONF_N02_xxxInviteToConf CONF_N03_xxxLeaveConf CONF_N04_xxxRemoveFromConf CONF_N05_xxx TerminateConf CONF_N06_xxxUserEquipment CONF_U01_xxx Interaction TIR CONF_N0

30、8_xxxOIR CONF_N09_xxx ACR-CB CONF_N10_xxxETSI ETSI TS 186 010-3 V3.1.1 (2012-01)85.2.2 Test case identifiers The test case names are built up according to the following scheme: “_“_“ where: a) double quotes (“) are used to enclose literal strings; b) is the group index in Table 1 (which uniquely ide

31、ntifies the path of groups/subgroups); c) is a running 3-digit decimal number, starting in each subgroup path with “001“. EXAMPLE: TC_CONF_N01_001: i) the identifier has Group index “CONF_N01“, i.e. it is in the subgroup having complete path: SupplementaryServices_CONF/ConferenceFocus/CreateConf; ii

32、) the identifier is the first test case of this group/subgroup. NOTE: This naming scheme provides a 1-1 correspondence of TP identifiers as defined in TS 186 010-2 2 and test case names. The TP identifier of TC_CONF_N01_001 is TP CONF_N01_001. 5.3 ATS specification framework 5.3.1 ATS Library For th

33、is ATS the TTCN-3 library modules are basically organized as: 1) AtsCommon modules. 2) LibIms modules. 3) LibSip modules (RFC 3261 4). 4) LibCommon modules (taken from an improved version of TS 102 351 8). NOTE: Due to the common LibSip and LibIms library approach with some other parallel running pr

34、ojects there is necessary to create tag version of all library modules. Table 2 shows the organization of the ATS as library of modules. Table 2: Library of modules Module Class Module Id Description CONF CONF_TC_Functions CONF test case functions CONF_TestCases CONF test case definitions CONF_Templ

35、ates CONF template definitions CONF_Steps CONF teststep definitions AtsCommon SS_Ims_PICS Module Parameter declarations associated with PICS SS_Ims_PIXITS SIP common Module Parameter declarations associated with PIXIT SS_Ims_TestConfiguration Functions which implement the configuration of the SUT ad

36、apter and mapping of test components for establishing and tearing down different test configurations SS_Ims_TestSystem TSI components, test system internal ports SS_Ims_TestCases Test case definitions SS_Ims_Functions Test case functions ETSI ETSI TS 186 010-3 V3.1.1 (2012-01)9Module Class Module Id

37、 Description LibIms LibIms_PIXITS IMS specific common Module Parameter (e.g. addresses related to SUT components and TS) declarations associated with PIXIT LibIms_Interface IMS component LibIms_SIPTypesAndValues IMS specific user and interface specific profile data (see note) LibIms_Templates Modifi

38、ed templates with IMS specific header fields LibIms_Steps functions using IMS specific types LibSip LibSip_PIXITS SIP general common Module Parameter (e.g. SDP/SIP procedure options) declarations associated with PIXIT LibSip_Interface SIP component LibSip_SIPTypesAndValues SIP message types and cons

39、tants, simple user profiles (see note) LibSip_SDPTypes SDP types and constants LibSip_Templates Basic and modified templates with SIP specific header fields LibSip_Steps SIP specific behaviour function library LibSip_XMLTypes XML types for SIP tests XSDAUX Basic types used in XML LibCommon LibCommon

40、_AbstractData Generic data types for a stack and its operations LibCommon_BasicTypesAndValues Basic type and value definitions (integer and Boolean) LibCommon_DataStrings Bit and Octet string types LibCommon_Sync Co-ordination/synchronization of test components LibCommon_TextStrings Basic character

41、and string types with fixed length LibCommon_Time Time handling functions and module parameter LibCommon_VerdictControl Basic functions for setting of test component verdicts NOTE: In order to build a comprehensive library all SIP message header (incl. IMS specific) have been defined in LibSip_SIPTy

42、pesAndValues only. 5.3.2 Use of TTCN-3 For the purposes of the present document, the description of the use of TTCN-3 described in clause 5.3.2 of TS 102 790-3 3 applies. ETSI ETSI TS 186 010-3 V3.1.1 (2012-01)10Annex A (normative): Partial PIXIT proforma Notwithstanding the provisions of the copyri

43、ght clause related to the text of the present document, grants that users of the present document may freely reproduce the PIXIT proforma in this annex so that it can be used for its intended purposes and may further publish the completed PIXIT proforma. A.1 Introduction This partial PIXIT proforma

44、contained in the present document is provided for completion, when the related Abstract Test Suite is to be used against the Implementation Under Test (IUT). The completed partial PIXIT will normally be used in conjunction with the completed PICS, as it adds precision to the information provided by

45、the PICS. A.2 PIXIT items According to the type of ATS defined in the present document, the PIXIT are divided in PIXIT items for UE, AS and general PIXIT items that apply for all types of IUT. Each PIXIT item corresponds to a Module Parameter of the ATS. NOTE: The PIXIT definitions are part of a SIP

46、 TTCN-3 library that contains additional PIXIT definitions that are not used in this ATS and are therefore not presented in the following tables. A.2.1 PIXIT for UE Testing Table A.1: PIXIT items for UE testing Id Identifier Type / Description 1 PX_IMS_TS_PCSCF_IPADDR charstring, for TS/P-CSCF IP ad

47、dress to exchange SIP messages. 2 PX_IMS_TS_PCSCF_PORT integer, for IUT/P-CSCF port number to exchange SIP messages. 3 PX_IMS_TS_UE1_IPADDR charstring, for IP address used by the UE1 to exchange SIP messages. 4 PX_IMS_TS_UE1_PORT integer, for port number used by the UE1 to exchange SIP messages. 5 P

48、X_IMS_SUT_UE1_BEARER_IPADDR charstring, for IP address used by the TS to exchange media streams for UE1. 6 PX_IMS_SUT_UE1_HOME_DOMAIN charstring, for identity of the tester UE1 local domain. 7 PX_IMS_SUT_UE1_PUBLIC_USER charstring, for identity of the tester UE1 local user. 8 PX_IMS_SUT_UE1_PRIVAT_U

49、SERNAME charstring, for RFC 2617 10, clause 3.2.2 username of UE1: The name of user in the specified realm. 9 PX_IMS_SUT_UE1_PRIVAT_PASSWD charstring, for RFC 2617 10, clause 3.2.2.2 passwd of UE1: A known shared secret, the password of user of the specified username. 10 PX_IMS_SUT_UE1_QOP charstring, for RFC 2617 10, clause 3.2.1 qop options of UE1: Quoted string of one or more tokens indicating the “quality of protection“ values supported by the server; the value “auth“ indicates authentication; the value “auth-int