ETSI TS 186 012-1-2008 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) PSTN ISDN simulation services Subaddressing (SUB) Part 1 Pr_1.pdf

1、 ETSI TS 186 012-1 V1.0.0 (2008-06)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);PSTN/ISDN simulation services;Subaddressing (SUB);Part 1: Protocol ImplementationConformance Statement (PICS)ETSI ETSI TS 186 012-1 V1.0.0 (2008

2、-06) 2 Reference DTS/TISPAN-06044-1-NGN Keywords IMS, PICS, SUB, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N

3、 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference

4、version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of

5、 status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Noti

6、fication No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2008. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ET

7、SI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 186 012-1 V1.0.0 (2008-06) 3 Contents Intellectual Property Rights4 Foreword.4 1 Scope 5 2 Referen

8、ces 5 2.1 Normative references .5 2.2 Informative references6 3 Definitions and abbreviations.6 3.1 Definitions6 3.2 Abbreviations .6 4 Protocol Implementation Conformance Statement proforma.7 4.1 Instructions for completing the PICS proforma7 4.1.1 More detailed instructions are given at the beginn

9、ing of the different clauses of the PICS proforma7 4.1.1.1 Purposes and structure.7 4.1.2 Abbreviations and conventions.7 4.2 Identification of the implementation 8 4.2.1 Date of the statement 8 4.2.2 Implementation Under Test (IUT) identification8 4.2.3 System Under Test (SUT) identification 8 4.2.

10、4 Product supplier 9 4.2.5 Client 9 4.2.6 PICS contact person9 4.3 PICS proforma tables .9 4.3.1 Global statement of conformance .9 4.3.2 Roles and network capabilities .10 5 Additional information for PICS10 History 11 ETSI ETSI TS 186 012-1 V1.0.0 (2008-06) 4 Intellectual Property Rights IPRs esse

11、ntial or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentia

12、lly Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out

13、by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Commit

14、tee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 1 of a multi-part deliverable covering the Subaddressing (SUB) service, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Te

15、st Suite Structure and Test Purposes (TSS - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the sou

16、rce shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the method of access to the refere

17、nced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenc

18、ed documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI ES 283 003: “Telecommunications and Internet converg

19、ed Services and Protocols for Advanced Networking (TISPAN); IP Multimedia Call Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP) Stage 3 3GPP TS 24.229 (Release 7), modified“. 2 ETSI TS 181 002: “Telecommunications and Internet converged Services and

20、Protocols for Advanced Networking (TISPAN); Multimedia Telephony with PSTN/ISDN simulation services“. 3 IETF RFC 3261: “SIP: Session Initiation Protocol“. 4 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation

21、 Conformance Statements“. 5 IETF RFC 3966 (2004): “The tel URI for Telephone Numbers“. 6 ETSI ES 283 027: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Endorsement of the SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN) subs

22、ystem and Circuit Switched (CS) networks 3GPP TS 29.163 (Release 7), modified“. ETSI ETSI TS 186 012-1 V1.0.0 (2008-06) 6 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject ar

23、ea. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 181 002 2 and RFC 3261 3 apply. 3.2 Abbre

24、viations For the purposes of the present document, the following abbreviations apply: HOLD communication HOLD IMS IP Multimedia Subsystem IP Internet Protocol ISDN Integrated Service Data Network NGN Next Generation Network OCB Outgoing Communication Barring PSTN Public Switched Telephone Network SD

25、P Session Description Protocol SIP Session Initiation Protocol SUB Subaddressing UE User Equipment URI Universal Resource Identifier ETSI ETSI TS 186 012-1 V1.0.0 (2008-06) 7 4 Protocol Implementation Conformance Statement proforma Notwithstanding the provisions of the copyright clause related to th

26、e text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this clause so that it can be used for its intended purposes and may further publish the completed PICS. 4.1 Instructions for completing the PICS proforma 4.1.1 More detailed inst

27、ructions are given at the beginning of the different clauses of the PICS proforma The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. If necessary, the supplier may provide additional comments separately in clause 5. 4.1.1.1 Purposes and structure The

28、purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in reference specification 1 to 6 may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following cate

29、gories of information: instructions for completing the PICS proforma; identification of the implementation; identification of the reference protocol specification; PICS proforma tables (containing the global statement of conformance). 4.1.2 Abbreviations and conventions The PICS proforma is composed

30、 of an information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column It contains a number that identifies the item in the table. Item description column It describes each respective item (e.g. parameters, timers, etc.). Reference column It gives reference t

31、o the SUB specification 5, except where explicitly stated otherwise. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported. n/a not applicable - in the given context, it is impossible to use the ca

32、pability. No answer in the support column is required. o optional - the capability may be supported or not. ETSI ETSI TS 186 012-1 V1.0.0 (2008-06) 8 o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optiona

33、l items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying a unique conditional status expression that i

34、s defined immediately following the table. For nested conditional expressions, the syntax “IF . THEN (IF . THEN . ELSE.) ELSE .“ shall be used to avoid ambiguities. If an ELSE clause is omitted, “ELSE n/a“ shall be implied. NOTE: Support of a capability means that the capability is implemented in co

35、nformance to the specification(s) 1 to 6. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by the impl

36、ementation. N/A or n/a - no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional status). 4.2 Identification of the implementation Identification of the Implementation Under Test (IUT) and the system in which it resides - the System Under Test (SUT) shoul

37、d be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regarding information supplied in the PICS should be

38、 named as the contact person. 4.2.1 Date of the statement Date of the statement: 4.2.2 Implementation Under Test (IUT) identification IUT name: IUT version: 4.2.3 System Under Test (SUT) identification SUT name: Hardware configuration: Operating system: ETSI ETSI TS 186 012-1 V1.0.0 (2008-06) 9 4.2.

39、4 Product supplier Name: Address: Telephone number: Facsimile number: Additional information: 4.2.5 Client Name: Address: Telephone number: Facsimile number: Additional information: 4.2.6 PICS contact person Name: Telephone number: Facsimile number: Additional information: 4.3 PICS proforma tables 4

40、.3.1 Global statement of conformance (Yes/No) Are all mandatory capabilities implemented? ETSI ETSI TS 186 012-1 V1.0.0 (2008-06) 104.3.2 Roles and network capabilities Table 1: Roles and network capabilities Item Item description Reference Status Support 1 UE Is the Subaddressing service provided?

41、3 o 2 Is the Subaddressing service provided? 3 o 3 MGCF Is the interworking of isub parameter in the user part of an URI and the Subaddress contained in an ATP parameter in an ISUP message provided? 7.4.5/6 o 5 Additional information for PICS ETSI ETSI TS 186 012-1 V1.0.0 (2008-06) 11History Document history V1.0.0 June 2008 Publication