ETSI TS 186 014-3-2012 IMS Network Testing (INT) Communication Diversion (CDIV) using IP Multimedia (IM) Core Network (CN) subsystem Conformance Testing Part 3 Abstract Test Suite .pdf

1、 ETSI TS 186 014-3 V3.1.1 (2012-01) IMS Network Testing (INT); Communication Diversion (CDIV) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Testing; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification

2、floppy3Technical Specification ETSI ETSI TS 186 014-3 V3.1.1 (2012-01)2Reference DTS/INT-00029-3 Keywords ATS, CDIV, IMS, PIXIT, SIP, testing, TTCN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C

3、 Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existin

4、g or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present documen

5、t should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the followi

6、ng services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2012. All rights

7、reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and own

8、ed by the GSM Association. ETSI ETSI TS 186 014-3 V3.1.1 (2012-01)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Abstract T

9、est Method (ATM) . 6g34.1 Configurations for testing UE 6g35 The ATS development process . 7g35.1 Requirements and Test Purposes 7g35.2 ATS structure . 7g35.2.1 Test case grouping 7g35.2.2 Test case identifiers 7g35.3 ATS specification framework . 8g35.3.1 ATS Library 8g35.3.2 Use of TTCN-3 . 9g3Ann

10、ex A (normative): Partial PIXIT proforma 10g3A.1 Introduction 10g3A.2 PIXIT items 10g3A.2.1 PIXIT for UE Testing . 10g3A.2.2 PIXIT for AS Testing . 11g3A.2.3 General PIXIT 11g3Annex B (informative): TTCN-3 library modules . 12g3B.1 Electronic annex, zip file with TTCN-3 code 12g3Annex C (informative

11、): Validation Report 13g3C.1 Test Suite Validation Level 13g3C.2 TTCN-3 Edition . 13g3C.3 TTCN-3 Tool(s) . 13g3C.3.1 TTCN-3 Tool Elvior TestCast13g3C.3.1.1 Identification of the TTCN-3 Tool Elvior TestCast13g3C.3.1.2 Compilation status 13g3C.3.2 TTCN-3 Tool EricssonTitan 13g3C.3.2.1 Identification o

12、f the TTCN-3 Tool EricssonTitan . 13g3C.3.2.2 Compilation status 13g3C.3.3 TTCN-3 Tool Testing Technologies TTWorkbench14g3C.3.3.1 Identification of the TTCN-3 Tool Testing Technologies TTWorkbench14g3C.3.3.2 Compilation status 14g3C.3.4 Test Platform(s) 14g3History 15g3ETSI ETSI TS 186 014-3 V3.1.1

13、 (2012-01)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectu

14、al Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IP

15、R searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been

16、produced by ETSI Technical Committee IMS Network Testing (INT). The present document is part 3 of a multi-part deliverable covering Communication Diversion (CDIV), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TS

17、S Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. ETSI ETSI TS 186 014-3 V3.1.1 (2012-01)51 Scope The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information f

18、or Testing (PIXIT) proforma based on the Test Suite Structure and Test Purposes defined in TS 186 014-2 2. The test notation used in the ATS is TTCN-3 (see ES 201 873-1 7). The following test specification- and design considerations can be found in the body of the present document: the overall test

19、suite structure; the testing architecture; the test methods and port definitions; the test configurations; the design principles, assumptions, and used interfaces to the TTCN3 tester (System Simulator); TTCN styles and conventions; the partial PIXIT proforma; the modules containing the TTCN-3 ATS. A

20、nnex A provides the Partial Implementation Extra Information for Testing (PIXIT) Proforma of the ATS. Annex B provides the Testing and Test Control Notation (TTCN-3) part of the ATS. 2 References References are either specific (identified by date of publication and/or edition number or version numbe

21、r) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http

22、:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETSI TS 124

23、604 (V8.7.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Communication Diversion (CDIV) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.604 version 8.7.0 Release 8)“. 2 ETSI TS 186 014-2 (V3

24、.1.1): “Technical Committee for IMS Network Testing (INT); PSTN/ISDN simulation services; Communication Diversion (CDIV); Part 2: Test Suite Structure and Test Purposes (TSS Network Integration Testing; IMS specific use of Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Con

25、formance Testing; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. 4 IETF RFC 3261 (2002): “SIP: Session Initiation Protocol“. ETSI ETSI TS 186 014-3 V3.1.1 (2012-01)65 ISO/IEC 9646-1: “Information technology - Open

26、Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 7 ETSI ES 201 873-1 (V4.3.1)

27、: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 8 ETSI TS 102 351 (V2.1.1): “Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Testing: Methodology and Framework“. 9 ETSI TS 102 587-2: “E

28、lectromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 2: Conformance testing; Test Suite Structure and Test Purposes (TSS they are based on the names provided in clause 4 of TS 186 014-2 2, but use the naming conventions defined for the ATS (s

29、ee clause 5.2.2). Table 1: CDIV ATS structure Netw ASdivertingUser/DivProcedures CDIV_N01 ASdivertingUser/NotOrigUser CDIV_N02 ASdivertingUser/NotDivUser CDIV_N03 ASdiverted-to CDIV_N04 User OrigUE CDIV_U01 DivertingUE CDIV_U02Interaction TIP CDIV_N05_xxx IR CDIV_N06_xxxACR-CB CDIV_N07_xxxECT CDIV_N

30、08_xxx5.2.2 Test case identifiers The test case names are built up according to the following scheme: “_“_“ ETSI ETSI TS 186 014-3 V3.1.1 (2012-01)8where: a) double quotes (“) are used to enclose literal strings; b) is the group index in Table 1 (which uniquely identifies the path of groups/subgroup

31、s); c) is a running 3-digit decimal number, starting in each subgroup path with “001“. EXAMPLE: TC_OIP_N01_001: i) the identifier has Group index “CDIV_N01“, i.e. it is in the subgroup having complete path: SupplementaryServices_CDIV/Netw/ASdivertingUser/DivProcedures; ii) the identifier is the firs

32、t test case of this group/subgroup. NOTE: This naming scheme provides a 1-1 correspondence of TP identifiers as defined in TS 186 014-2 2 and test case names. The TP identifier of TC_CDIV_N01_001 is TP CDIV_N01_001. 5.3 ATS specification framework 5.3.1 ATS Library For this ATS the TTCN-3 library mo

33、dules are basically organized as: 1) AtsCommon modules. 2) LibIms modules. 3) LibSip modules (RFC 3261 4). 4) LibCommon modules (taken from an improved version of TS 102 351 8). NOTE: Due to the common LibSip and LibIms library approach with some other parallel running projects there is necessary to

34、 create tag version of all library modules. Table 2 shows the organization of the ATS as library of modules. Table 2: Library of modules Module Class Module Id Description CDIV CDIV_TC_Functions CDIV test case functions CDIV_TestCases CDIV test case definitions CDIV_Templates CDIV template definitio

35、nsAtsCommon SS_Ims_PICS Module Parameter declarations associated with PICS SS_Ims_PIXITS SIP common Module Parameter declarations associated with PIXIT SS_Ims_TestConfiguration Functions which implement the configuration of the SUT adapter and mapping of test components for establishing and tearing

36、down different test configurations SS_Ims_TestSystem TSI components, test system internal ports SS_Ims_TestCases Test case definitions SS_Ims_Functions Test case functions LibIms LibIms_PIXITS IMS specific common Module Parameter (e.g. addresses related to SUT components and TS) declarations associa

37、ted with PIXIT LibIms_Interface IMS component LibIms_SIPTypesAndValues IMS specific user and interface specific profile data (see note) LibIms_Templates Modified templates with IMS specific header fields LibIms_Steps functions using IMS specific types ETSI ETSI TS 186 014-3 V3.1.1 (2012-01)9Module C

38、lass Module Id Description LibSip LibSip_PIXITS SIP general common Module Parameter (e.g. SDP/SIP procedure options) declarations associated with PIXIT LibSip_Interface SIP component LibSip_SIPTypesAndValues SIP message types and constants, simple user profiles (see note) LibSip_SDPTypes SDP types a

39、nd constants LibSip_Templates Basic and modified templates with SIP specific header fields LibSip_Steps SIP specific behaviour function library LibSip_XMLTypes XML types for SIP tests XSDAUX Basic types used in XML LibCommon LibCommon_AbstractData Generic data types for a stack and its operations Li

40、bCommon_BasicTypesAndValues Basic type and value definitions (integer and Boolean) LibCommon_DataStrings Bit and Octet string types LibCommon_Sync Co-ordination/synchronization of test components LibCommon_TextStrings Basic character and string types with fixed length LibCommon_Time Time handling fu

41、nctions and module parameter LibCommon_VerdictControl Basic functions for setting of test component verdicts NOTE: In order to build a comprehensive library all SIP message header (incl. IMS specific) have been defined in LibSip_SIPTypesAndValues only. 5.3.2 Use of TTCN-3 For the purposes of the pre

42、sent document, the description of the use of TTCN-3 described in clause 5.3.2 of TS 102 790-3 3 applies. ETSI ETSI TS 186 014-3 V3.1.1 (2012-01)10Annex A (normative): Partial PIXIT proforma Notwithstanding the provisions of the copyright clause related to the text of the present document, grants tha

43、t users of the present document may freely reproduce the PIXIT proforma in this annex so that it can be used for its intended purposes and may further publish the completed PIXIT proforma. A.1 Introduction This partial PIXIT proforma contained in the present document is provided for completion, when

44、 the related Abstract Test Suite is to be used against the Implementation Under Test (IUT). The completed partial PIXIT will normally be used in conjunction with the completed PICS, as it adds precision to the information provided by the PICS. A.2 PIXIT items According to the type of ATS defined in

45、the present document, the PIXIT are divided in PIXIT items for UE, AS and general PIXIT items that apply for all types of IUT. Each PIXIT item corresponds to a Module Parameter of the ATS. NOTE: The PIXIT definitions are part of a SIP TTCN-3 library that contains additional PIXIT definitions that ar

46、e not used in this ATS and are therefore not presented in the following tables. A.2.1 PIXIT for UE Testing Table A.1: PIXIT items for UE testing Id Identifier Type / Description 1 PX_IMS_TS_PCSCF_IPADDR charstring, for TS/P-CSCF IP address to exchange SIP messages. 2 PX_IMS_TS_PCSCF_PORT integer, fo

47、r IUT/P-CSCF port number to exchange SIP messages. 3 PX_IMS_TS_UE1_IPADDR charstring, for IP address used by the UE1 to exchange SIP messages. 4 PX_IMS_TS_UE1_PORT integer, for port number used by the UE1 to exchange SIP messages. 5 PX_IMS_SUT_UE1_BEARER_IPADDR charstring, for IP address used by the

48、 TS to exchange media streams for UE1. 6 PX_IMS_SUT_UE1_HOME_DOMAIN charstring, for identity of the tester UE1 local domain. 7 PX_IMS_SUT_UE1_PUBLIC_USER charstring, for identity of the tester UE1 local user. 8 PX_IMS_SUT_UE1_PRIVAT_USERNAME charstring, for RFC 2617 10, clause 3.2.2 username of UE1:

49、 The name of user in the specified realm. 9 PX_IMS_SUT_UE1_PRIVAT_PASSWD charstring, for RFC 2617 10, clause 3.2.2.2 passwd of UE1: A known shared secret, the password of user of the specified username. 10 PX_IMS_SUT_UE1_QOP charstring, for RFC 2617 10, clause 3.2.1 qop options of UE1: Quoted string of one or more tokens indicating the “quality of protection“ values supported by the server; the value “auth“ indicates authentication; the value “auth-int“ indicates authentication with integrity protection. 11 PX_IMS_SU