ETSI TS 186 015-1-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) PSTN ISDN simulation services Explicit Communication Transf.pdf

1、 ETSI TS 186 015-1 V2.1.1 (2009-07)Technical Specification Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN);PSTN/ISDN simulation services:Explicit Communication Transfer (ECT);Part 1: Protocol Implementation conformance Statement (PICS)ETSI ETSI TS 18

2、6 015-1 V2.1.1 (2009-07)2Reference DTS/TISPAN-06032-1-NGN-R2 Keywords ECT, IMS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfec

3、ture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such ver

4、sions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to

5、revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_suppo

6、rt.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the T

7、IPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and

8、of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 015-1 V2.1.1 (2009-07)3Contents Intellectual Property Rights 4g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informati

9、ve references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Protocol Implementation Conformance Statement proforma . 6g34.1 Instructions for completing the PICS proforma 6g34.1.1 More detailed instructions are given at the beginning of the different subclauses o

10、f the PICS proforma. 6g34.1.1.1 Purposes and structure. 6g34.1.2 Abbreviations and conventions . 7g34.2 Identification of the implementation 7g34.2.1 Date of the statement 8g34.2.2 Implementation Under Test (IUT) identification 8g34.2.3 System Under Test (SUT) identification 8g34.2.4 Product supplie

11、r 8g34.2.5 Client 8g34.2.6 PICS contact person 8g34.3 PICS proforma tables . 8g34.3.1 Global statement of conformance . 8g34.3.2 Terminal and network capabilities 9g3History 10g3ETSI ETSI TS 186 015-1 V2.1.1 (2009-07)4Intellectual Property Rights IPRs essential or potentially essential to the presen

12、t document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in resp

13、ect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the

14、 existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Telecommunications and Internet converge

15、d Services and Protocols for Advanced Networking (TISPAN). The present document is part 1 Protocol Conformance Implementation Statement of the Explicit Communication transfer (ECT) simulation service, based on stage one and two of the ISDN ECT supplementary service. Within the Next Generation Networ

16、k (NGN) the stage 3 description is specified using the IP Multimedia Communication Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP) as described below: Part 1: “Protocol Implementation Conformance Statement (PICS); Part 2: “Test Suite Structure and T

17、est Purposes (TSS - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee

18、 their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendm

19、ents) applies. 1 ETSI TS 183 029: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services: Explicit Communication Transfer (ECT); Protocol specification“. 2 ETSI TS 123 228: “Digital cellular telecommunications system (Phase 2

20、+); Universal Mobile Telecommunications System (UMTS); LTE; IP Multimedia Subsystem (IMS); Stage 2 (3GPP TS 23.228 version 8.8.0 Release 8)“.“. 3 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformanc

21、e Statements“. ETSI ETSI TS 186 015-1 V2.1.1 (2009-07)62.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenc

22、ed document (including any amendments) applies. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions specified in 1 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations specified in 1 apply

23、. 4 Protocol Implementation Conformance Statement proforma 4.1 Instructions for completing the PICS proforma 4.1.1 More detailed instructions are given at the beginning of the different subclauses of the PICS proforma. The supplier of the implementation shall complete the PICS proforma in each of th

24、e spaces provided, if necessary. 4.1.1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in specification 1 to 2 may provide information about the implementation in a standardized manner. The PICS

25、proforma is subdivided into subclauses for the following categories of information: instructions for completing the PICS proforma; identification of the implementation; product supplier; client; PICS contact person; PICS proforma tables (containing the global statement of conformance). ETSI ETSI TS

26、186 015-1 V2.1.1 (2009-07)74.1.2 Abbreviations and conventions The PICS proforma is composed of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 3. Item column It contains a number that identifies the item in the table. Item description column It describes ea

27、ch respective item (e.g. parameters, timers, etc.). Reference column It gives reference to the CDIV specification 1, except where explicitly stated otherwise. Status column The following notations, defined in ISO/IEC 9646-7 3, are used for the status column: m mandatory - the capability is required

28、to be supported. n/a not applicable - in the given context, it is impossible to use the capability. No answer in the support column is required. o optional - the capability may be supported or not. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer wh

29、ich identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifyi

30、ng a unique conditional status expression that is defined immediately following the table. For nested conditional expressions, the syntax “IF . THEN (IF . THEN . ELSE.) ELSE .“ shall be used to avoid ambiguities. If an ELSE clause is omitted, “ELSE n/a“ shall be implied. NOTE: Support of a capabilit

31、y means that the capability is implemented in conformance to the specification(s) 1 to 2. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 3, are used for the support column: Y or y supported by the

32、implementation. N or n not supported by the implementation. N/A or n/a no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional status). 4.2 Identification of the implementation Identification of the Implementation Under Test (IUT) and the system in which

33、it resides - the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regard

34、ing information supplied in the ICS should be named as the contact person. ETSI ETSI TS 186 015-1 V2.1.1 (2009-07)84.2.1 Date of the statement Date of the statement: 4.2.2 Implementation Under Test (IUT) identification IUT name: IUT version: 4.2.3 System Under Test (SUT) identification SUT name: Har

35、dware configuration: Operating system: 4.2.4 Product supplier Name: Address: Telephone number: Facsimile number: Additional information: 4.2.5 Client Name: Address: Telephone number: Facsimile number: Additional information: 4.2.6 PICS contact person Name: Telephone number: Facsimile number: Additio

36、nal information: 4.3 PICS proforma tables 4.3.1 Global statement of conformance (Yes/No) Are all mandatory capabilities implemented? ETSI ETSI TS 186 015-1 V2.1.1 (2009-07)94.3.2 Terminal and network capabilities Table 1: Network capabilities Item Item description Reference Status Support 1 Is the b

37、lind transfer supported? 5.11.6 2 o.11 2 Is the assured transfer supported? 5.11.6 2 o.11 3 Is the consultative transfer supported? 5.11.6 2 o.11 4 The AS initiate the special REFER handling procedures when a 403 Forbidden or 501 Not implemented is received after the REFERrequest is forwarded to the

38、 Transferee? 4.5.2.4.1.2.3 1 o 5 The AS of the initiator of the REFER request that has prior knowledge that the remote party is not allowed to receive or does not support the REFER method, initiates the special REFER handling procedures directly? 4.5.2.4.1.2.3 1 o 6 Does the Transferee AS reject the

39、 INVITE request sent to the Transfer Target if the Referred-By header does not match the stored Referred-By header of the received REFER? 4.5.2.7.3 1 c21 7 Does the Transferee AS replaces the URI of the Referred-By header in the INVITE sent to the Transfer Target with the URI stored from the receive

40、d REFER request, if there is no match? 4.5.2.7.3 1 c22 8 Does the Transferee AS inserts a Referred-By header in the INVITE request sent to the Transfer Target if the Referred-By header is absent and the value is equal to the stored value received in the REFER request. 4.5.2.7.3 1 o o.11: It is manda

41、tory to support at least one of these items. c21: IF NOT 1/7 THEN o ELSE n/a. c22: IF NOT 1/6 THEN o ELSE n/a. Table 2: User Equipment capabilities Item Item description Reference Status Support 1 Is the blind transfer supported? 5.11.6 2 o.21 2 Is the assured transfer supported? 5.11.6 2 o.21 3 Is

42、the consultative transfer supported? 5.11.6 2 o.21 4 Transferor Is the UE able to Issue a REFER request in the original communications dialog to invoke the transfer of the session? 4.5.2.1 1 c21 5 Transferee Is the UE able to handle a received REFER to transfer the current session? 4.5.2.5 1 o o.21: It is mandatory to support at least one of these items. c21: IF 2.1 OR 2.2 OR 2.3 THEN m ELSE n/a. ETSI ETSI TS 186 015-1 V2.1.1 (2009-07)10History Document history V2.1.1 July 2009 Publication