ETSI TS 186 016-1-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) PSTN ISDN simulation services Closed User Group (CUG) Part .pdf

1、 ETSI TS 186 016-1 V2.1.1 (2009-02)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);PSTN/ISDN simulation services;Closed User Group (CUG);Part 1: Protocol Implementation ConformanceStatement (PICS)ETSI ETSI TS 186 016-1 V2.1.1 (

2、2009-02) 2 Reference DTS/TISPAN-06037-1-NGN-R2 Keywords CUG, IMS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse

3、 (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the ref

4、erence version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or ch

5、ange of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyrig

6、ht Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and

7、 the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Or

8、ganizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 016-1 V2.1.1 (2009-02) 3 Contents Intellectual Property Rights4 Foreword.4 1 Scope 5 2 References 5 2.1 Normative references .5 2.2 Informative references5 3 Definitions and abbr

9、eviations.6 3.1 Definitions6 3.2 Abbreviations .6 4 Protocol Implementation Conformance Statement proforma.6 4.1 Instructions for completing the PICS proforma6 4.1.1 More detailed instructions are given at the beginning of the different clauses of the PICS proforma6 4.1.1.1 Purposes and structure.7

10、4.1.2 Abbreviations and conventions.7 4.2 Identification of the implementation 8 4.2.1 Date of the statement 8 4.2.2 Implementation Under Test (IUT) identification8 4.2.3 System Under Test (SUT) identification 8 4.2.4 Product supplier 8 4.2.5 Client 8 4.2.6 PICS contact person8 4.3 PICS proforma tab

11、les .9 4.3.1 Global statement of conformance .9 4.3.2 Network capabilities .9 5 Additional information for PICS9 History 10 ETSI ETSI TS 186 016-1 V2.1.1 (2009-02) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The infor

12、mation pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the

13、ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 0

14、00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TI

15、SPAN). The present document is part 1 of a multi-part deliverable covering PSTN/ISDN simulation services; Closed User Group (CUG), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (A

16、TS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. ETSI ETSI TS 186 016-1 V2.1.1 (2009-02) 5 1 Scope The present document specifies the protocol implementation conformance statement of the Closed User Group (CUG) service, based on stage three of th

17、e IMS closed user group (CUG) simulation services. Within the Next Generation Network (NGN) the stage 3 description is specified using the IP-Multimedia Call Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP). 2 References References are either specifi

18、c (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it wi

19、ll be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any

20、hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. Fo

21、r non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI TS 183 054: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services; Protocol specification Closed User Group

22、(CUG)“. 2 ETSI TS 181 002: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Multimedia Telephony with PSTN/ISDN simulation services“. 3 IETF RFC 3261: “SIP: Session Initiation Protocol“. 4 ISO/IEC 9646-7: “Information technology - Open Systems Inter

23、connection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-s

24、pecific references, the latest version of the referenced document (including any amendments) applies. Not applicable. ETSI ETSI TS 186 016-1 V2.1.1 (2009-02) 6 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 181 002 2 an

25、d the following apply: escaped character: See RFC 3261 3. NOTE: This may contain additional information. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACK ACKnowledgement CUG Closed User Group HOLD communication HOLD IFC Initial Filter Criteria IMS IP

26、 Multimedia Subsystem IP Internet Protocol ISDN Integrated Service Data Network IUT Implementation Under Test MCID Malicious Communication IDentification NGN Next Generation Network OAE Outgoing access, explicit request required OAI Outgoing access, implicit outgoing access for all communications OC

27、B Outgoing Communication Barring (OCB) PICS Protocol Implementation Conformance Statement PSTN Public Switched Telephone Network SDP Session Description Protocol SIP Session Initiation Protocol SUT System Under Test TSS identification of the implementation; identification of the reference protocol s

28、pecification; PICS proforma tables (containing the global statement of conformance). 4.1.2 Abbreviations and conventions The PICS proforma is composed of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column It contains a number that identifies the

29、item in the table. Item description column It describes each respective item (e.g. parameters, timers, etc.). Reference column It gives reference to the CUG specification 1, except where explicitly stated otherwise. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the

30、 status column: m mandatory: the capability is required to be supported. n/a not applicable: in the given context, it is impossible to use the capability. No answer in the support column is required. o optional: the capability may be supported or not. o.i qualified optional: for mutually exclusive o

31、r selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional: the requirement on the capability (“m“, “o“ or “n/a“) depends on the support of other option

32、al or conditional items. “i“ is an integer identifying a unique conditional status expression that is defined immediately following the table. For nested conditional expressions, the syntax “IF . THEN (IF . THEN . ELSE.) ELSE .“ shall be used to avoid ambiguities. If an ELSE clause is omitted, “ELSE

33、 n/a“ shall be implied. NOTE: Support of a capability means that the capability is implemented in conformance to the specification(s) 1 to 3. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are u

34、sed for the support column: Y or y supported by the implementation. N or n not supported by the implementation. ETSI ETSI TS 186 016-1 V2.1.1 (2009-02) 8 N/A or n/a- no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional status). 4.2 Identification of th

35、e implementation Identification of the Implementation Under Test (IUT) and the system in which it resides - the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client inf

36、ormation should both be filled in if they are different. A person who can answer queries regarding information supplied in the PICS should be named as the contact person. 4.2.1 Date of the statement Date of the statement: 4.2.2 Implementation Under Test (IUT) identification IUT name: IUT version: 4.

37、2.3 System Under Test (SUT) identification SUT name: Hardware configuration: Operating system: 4.2.4 Product supplier Name: Address: Telephone number: Facsimile number: Additional information: 4.2.5 Client Name: Address: Telephone number: Facsimile number: Additional information: 4.2.6 PICS contact

38、person Name: Telephone number: Facsimile number: Additional information: ETSI ETSI TS 186 016-1 V2.1.1 (2009-02) 9 4.3 PICS proforma tables 4.3.1 Global statement of conformance (Yes/No) Are all mandatory capabilities implemented? 4.3.2 Network capabilities Table 1: Network capabilities Item Item de

39、scription Reference Status Support 1 Is the CUG without preference supported?4.5.2.4o1 2 Is the CUG Outgoing access, explicit request required without preference supported?4.5.2.4o1 3 Is the CUG Outgoing access, implicit outgoing access for all communications without preference supported?4.5.2.4o1 4

40、 Is the CUG with preference supported?4.5.2.4o1 5 Is the CUG+OAE with preference supported?4.5.2.4o1 6 Is the CUG Outgoing access, implicit outgoing access for all communications with preference supported?4.5.2.4o1 o1: at least one of this items should be provided 5 Additional information for PICS ETSI ETSI TS 186 016-1 V2.1.1 (2009-02) 10History Document history V2.1.1 February 2009 Publication