ETSI TS 186 017-1-2018 Core Network and Interoperability Testing (INT) Anonymous Communication Rejection (ACR) and Communication Barring (CB) using IP Multimedia (IM) Core Network .pdf

1、 ETSI TS 186 017-1 V6.1.1 (2018-07) Core Network and Interoperability Testing (INT); Anonymous Communication Rejection (ACR) and Communication Barring (CB) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Test Specification (3GPPTMRelease 12); Part 1: Protocol Implementation Conform

2、ance Statement (PICS) TECHNICAL SPECIFICATION ETSI ETSI TS 186 017-1 V6.1.1 (2018-07)2Reference RTS/INT-00148-1 Keywords anonymous communication reject, CB, conformance, IMS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47

3、 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in p

4、rint. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the

5、 Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/

6、portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, elect

7、ronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. Al

8、l rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its

9、Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 186 017-1 V6.1.1 (2018-07)3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative

10、references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Conformance to this PICS pro forma specification 6g34.0 Introduction 6g34.1 Guidance for completing the PICS pro forma 7g34.1.1 Purposes and structure 7g34.1.2 Abbreviations and conventions . 7g34.1.3 Inst

11、ructions for completing the PICS pro forma . 9g34.2 Identification of the implementation 9g34.2.0 Introduction. 9g34.2.1 Date of the statement 9g34.2.2 Implementation Under Test (IUT) identification 9g34.2.3 System Under Test (SUT) identification 9g34.2.4 Product supplier 10g34.2.5 Client (if differ

12、ent from product supplier) 10g34.2.6 PICS contact person 11g34.3 Identification of the Protocol specification. 11g34.4 Global statement of conformance . 11g34.5 Roles . 11g34.6 User role . 12g34.6.0 Introduction. 12g34.6.1 Major capabilities . 12g34.7 Network role . 12g34.7.0 Introduction. 12g34.7.1

13、 Major capabilities . 12g34.7.2 Supplementary service capabilities . 14g3History 15g3ETSI ETSI TS 186 017-1 V6.1.1 (2018-07)4Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to

14、these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Lat

15、est updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI

16、Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the propert

17、y of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has b

18、een produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering the Anonymous Communication Rejection (ACR) and Communication Barring (CB) simulation services, as identified below: Part 1: “Protocol Impleme

19、ntation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. Modal verbs terminology In the present document “shall“, “shall not“, “sho

20、uld“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. I

21、ntroduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called an Implementation Conformance Statement (PICS). ETSI ETSI TS 186 017-1 V6.

22、1.1 (2018-07)51 Scope The present document specifies the protocol implementation conformance statement of the Anonymous Communication Rejection (ACR) and Communication Barring (CB) simulation service, based on stage three of the IMS simulation service Anonymous Call Rejection (ACR), Incoming Communi

23、cation Barring (ICB) and Outgoing Communication Barring (OCB). Within the Next Generation Network (NGN) the stage 3 description is specified using the IP Multimedia Call Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP), and in accordance with the rel

24、evant guidance given in ISO/IEC 9646-7 4 and ETSI ETS 300 406 2. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific

25、 references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid

26、at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 124 611: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE;

27、 Anonymous Communication Rejection (ACR) and Communication Barring (CB) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.611 Release 12)“. 2 ETSI ETS 300 406 (10-1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing spec

28、ifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Conformance testing methodology a

29、nd framework - Part 7: Implementation Conformance Statements“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references,

30、the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the

31、present document but they assist the user with regard to a particular subject area. i.1 ETSI TS 124 607: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Originating Identification Presentation (OIP) and Originating Identification Restri

32、ction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.607 Release 12)“. ETSI ETSI TS 186 017-1 V6.1.1 (2018-07)6i.2 ETSI TS 124 604: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Communic

33、ation Diversion (CDIV) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.604 Release 12)“. i.3 ETSI TS 124 605: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Conference (CONF) using IP Multimedia

34、 (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.605 Release 12)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 124 611 1, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4 and the following apply: Implemen

35、tation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object IC

36、S, etc. ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification NOTE: This may contain additional information. 3.2 Abbrev

37、iations For the purposes of the present document, the abbreviations given in ETSI TS 124 611 1 and the following apply: ICS Implementation Conformance Statement IUT Implementation Under Test PDU Protocol Data Unit PICS Protocol ICS SCC Service Code Command SCS System Conformance Statement SUT System

38、 Under Test 4 Conformance to this PICS pro forma specification 4.0 Introduction If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma given in clause 4, and shall preserve the numberi

39、ng/naming and ordering of the pro forma items. A PICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance with the guidance for completion given in clause 4.1. ETSI ETSI TS 186 017-1 V6.1.1 (2018-07)7The right to copy Notwithstanding the provisions of

40、the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the application form for testing so that it can be used for its intended purposes and may further publish the completed application form. 4.1 Guidance for completing

41、the PICS pro forma 4.1.1 Purposes and structure The purpose of this ICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 124 611 1 may provide information about the implementation in a standardized manner. The ICS pro forma is subdivi

42、ded into clauses for the following categories of information: guidance for completing the ICS pro forma; identification of the implementation; identification of the ; global statement of conformance; roles; user role: - major capabilities; network role: - major capabilities. 4.1.2 Abbreviations and

43、conventions The ICS pro forma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. Item description column The item description column

44、 describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is the requirement or option supported by the implementation?“. ETSI ETSI TS 186 017-1 V6.1.1 (2018-07)8Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status colum

45、n: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i q

46、ualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“, “

47、x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an unique conditional status expression which is defined immediately following the table. Reference column The reference column makes reference to ETSI TS 124 611 1, except where explicitly stat

48、ed otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no

49、 answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). If this ICS pro forma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter the unique reference to a conditional expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It u