ETSI TS 186 021-1-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) PSTN ISDN simulation services Completion of Communications ni.pdf

1、 ETSI TS 186 021-1 V2.1.1 (2009-07)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);PSTN/ISDN simulation services;Completion of Communications to Busy Subscriber (CCBS)Completion of Communications by No Reply (CCNR);Part 1: Prot

2、ocol Implementation ConformanceStatement (PICS)ETSI ETSI TS 186 021-1 V2.1.1 (2009-07)2Reference DTS/TISPAN-06041-1-NGN-R2 Keywords CCBS, CCNR, IMS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00

3、017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any

4、case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the

5、present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one

6、 of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 20

7、09. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark o

8、f ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 021-1 V2.1.1 (2009-07)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 Refe

9、rences 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Protocol Implementation Conformance Statement proforma . 6g34.1 Instructions for completing the PICS proforma 6g34.1.1 More detailed instructions are

10、 given at the beginning of the different clauses of the PICS proforma 6g34.1.1.1 Purposes and structure. 6g34.1.2 Abbreviations and conventions . 6g34.2 Identification of the implementation 7g34.2.1 Date of the statement 7g34.2.2 Implementation Under Test (IUT) identification 8g34.2.3 System Under T

11、est (SUT) identification 8g34.2.4 Product supplier 8g34.2.5 Client 8g34.2.6 PICS contact person 8g34.3 PICS proforma tables . 9g34.3.1 Global statement of conformance . 9g34.3.2 Network capabilities . 9g35 Additional informations for PICS 9g3History 10g3ETSI ETSI TS 186 021-1 V2.1.1 (2009-07)4Intell

12、ectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Right

13、s (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR

14、 searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been p

15、roduced by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 1 of a multi-part deliverable covering protocol implementation conformance statement for the Completion of Communications to Busy Subscr

16、iber (CCBS) Completion of Communications by No Reply (CCNR), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing

17、(PIXIT) proforma specification“. ETSI ETSI TS 186 021-1 V2.1.1 (2009-07)51 Scope The present document specifies the protocol implementation conformance statement of the Completion of Communications to Busy Subscriber (CCBS) service and the Completion of Communication on no Reply (CCNR) service, base

18、d on stage three of the IMS simulation services. Within the Next Generation Network (NGN) the stage 3 description is specified using the IP Multimedia Call Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP). 2 References References are either specific

19、(identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will

20、 be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hy

21、perlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For

22、non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI TS 183 042 (V2.1.1): “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN Simulation Services; Completion of Communications to Bu

23、sy Subscriber (CCBS), Completion of Communications by No Reply (CCNR); Protocol Specification“. 2 ISO/IEC IS 9646-7: “Information Technology - Open Systems Interconnection - conformance Testing Methodologie and framework Part 7 - Implementation Conformance Statements“. 2.2 Informative references The

24、 following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. ETSI ETSI TS 186 021-

25、1 V2.1.1 (2009-07)63 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 1 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in 1 and the following apply: IUT Implementation Under Test. SU

26、T System Under Test 4 Protocol Implementation Conformance Statement proforma Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this clause so that it can be used

27、 for its intended purposes and may further publish the completed PICS. 4.1 Instructions for completing the PICS proforma 4.1.1 More detailed instructions are given at the beginning of the different clauses of the PICS proforma The supplier of the implementation shall complete the PICS proforma in ea

28、ch of the spaces provided. If necessary, the supplier may provide additional comments separately in clause 5. 4.1.1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in reference specification 1 ma

29、y provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of information: instructions for completing the PICS proforma; identification of the implementation; identification of the reference protocol specificati

30、on; PICS proforma tables (containing the global statement of conformance). 4.1.2 Abbreviations and conventions The PICS proforma is composed of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 2: Item column It contains a number that identifies the item in th

31、e table. ETSI ETSI TS 186 021-1 V2.1.1 (2009-07)7Item description column It describes each respective item (e.g. parameters, timers, etc.). Reference column It gives reference to the CCBS/CCNR specification 1, except where explicitly stated otherwise. Status column The following notations, defined i

32、n ISO/IEC 9646-7 2, are used for the status column: m mandatory - the capability is required to be supported. n/a not applicable - in the given context, it is impossible to use the capability. No answer in the support column is required. o optional - the capability may be supported or not. o.i quali

33、fied optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“ or “n/a

34、“) depends on the support of other optional or conditional items. “i“ is an integer identifying a unique conditional status expression that is defined immediately following the table. For nested conditional expressions, the syntax “IF . THEN (IF . THEN . ELSE.) ELSE .“ shall be used to avoid ambigui

35、ties. If an ELSE clause is omitted, “ELSE n/a“ shall be implied. NOTE: Support of a capability means that the capability is implemented in conformance to the specification 1. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, d

36、efined in ISO/IEC 9646-7 2, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A or n/a- no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional status). 4.2 Identification of the impleme

37、ntation Identification of the Implementation Under Test (IUT) and the system in which it resides - the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information

38、should both be filled in if they are different. A person who can answer queries regarding information supplied in the PICS should be named as the contact person. 4.2.1 Date of the statement Date of the statement: ETSI ETSI TS 186 021-1 V2.1.1 (2009-07)84.2.2 Implementation Under Test (IUT) identific

39、ation IUT name: IUT version: 4.2.3 System Under Test (SUT) identification SUT name: Hardware configuration: Operating system: 4.2.4 Product supplier Name: Address: Telephone number: Facsimile number: Additional information: 4.2.5 Client Name: Address: Telephone number: Facsimile number: Additional i

40、nformation: 4.2.6 PICS contact person Name: Telephone number: Facsimile number: Additional information: ETSI ETSI TS 186 021-1 V2.1.1 (2009-07)94.3 PICS proforma tables 4.3.1 Global statement of conformance (Yes/No) Are all mandatory capabilities implemented? 4.3.2 Network capabilities Table 1: Netw

41、ork capabilities Item Item description Reference Status Support 1 Is the CCBS/CCNR request retention option supported? 4.5.4.2.3.2.4/1o 2 Is the retain option supported? 4.5.4.3.4.2/1o 3 Is it possible to activate a further CCBS or CCNR request for an identical communication, determined by the store

42、d basic communication information 4.5.4.2.1.1.1/1o 4 Has the originating AS knowledge that UE-A does not support the REFER method extension, the originating AS starts the 3rd party call control procedures 4.5.4.2.3/1o 5 Does the originating CC-AS reduce the number of request entries for the caller?

43、4.5.4.2.1.1.3/1o 6 Does the terminating CC-AS reduce the number of request entries for the callee? 4.5.4.3.2/1o 7 Does the terminating CC-AS sends an indication to the originating CC-AS that CCBS or CCNR is possible if the terminating user has activated CFU while the recall is in progress? 4.6.8.2/1

44、o 8 It is possible that an outstanding CC request can be revoked by the user using service code commands? 4.5.4.2.2.1.2/1 o 9 Does the terminating CC-AS accepts a recall with identical originating and terminating identity information as stored in the request without CC indication? 4.5.4.3.4.1.3/1 4.

45、5.4.3.4.1.4/1 o Table 2: Timer Item Timer number Reference Status Support Values in seconds allowed supported CC-T1 4.8.1/ 1 m 15 CC-T2 4.8.1/ 1 m 10 CC-T3 4.8.1/ 1 m 10 800 CC-T4 4.8.1/ 1 m 20 CCNR-T5 4.8.1/ 1 m 20 CC-T7 4.8.1/ 1 m 11 400 CC-T8 4.8.1/ 1 m 10 CC-T9 4.8.1/ 1 m 30 5 Additional informations for PICS If necessary, the supplier may provide additional comments in this clause. ETSI ETSI TS 186 021-1 V2.1.1 (2009-07)10History Document history V2.1.1 July 2009 Publication