ETSI TS 186 022-1-2015 Core Network and Interoperability Testing (INT) Communication Waiting (CW) using IP Multimedia (IM) Core Network (CN) subsystem Conformance test specificatio.pdf

1、 ETSI TS 186 022-1 V3.1.1 (2015-10) Core Network and Interoperability Testing (INT); Communication Waiting (CW) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification (3GPPTMRelease 10); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATIO

2、N ETSI ETSI TS 186 022-1 V3.1.1 (2015-10)2Reference RTS/INT-00123-1 Keywords CW, IMS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous

3、-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall n

4、ot be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secr

5、etariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please se

6、nd your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permissio

7、n of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ET

8、SI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 022-

9、1 V3.1.1 (2015-10)3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Conformance to

10、this PICS pro forma specification 6g34.0 Introduction 6g34.1 Guidance for completing the PICS pro forma 6g34.1.1 Purposes and structure 6g34.1.2 Abbreviations and conventions . 7g34.1.3 Instructions for completing the PICS pro forma . 7g34.2 Identification of the implementation 8g34.2.0 Introduction

11、. 8g34.2.1 Date of the statement 8g34.2.2 Implementation Under Test (IUT) identification 8g34.2.3 System Under Test (SUT) identification 8g34.2.4 Product supplier 8g34.2.5 Client (if different from product supplier) 9g34.2.6 PICS contact person 9g34.3 Identification of the ETSI TS 124 615 . 10g34.4

12、Global statement of conformance . 10g34.5 Roles . 10g34.6 User role . 10g34.6.0 Introduction. 10g34.6.1 Major capabilities . 11g34.7 Network role . 11g34.7.0 Introduction. 11g34.7.1 Major capabilities . 11g34.7.2 Timers . 12g3History 13g3ETSI ETSI TS 186 022-1 V3.1.1 (2015-10)4Intellectual Property

13、Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essent

14、ial, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out

15、by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Commit

16、tee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering the Conformance Test Specification of Communication Waiting (CW) using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Protocol Implementation Confor

17、mance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Communication Waiting (CW) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol Specification (3GPP TS 24.615 Release 10)“. 2 ETSI ETS 300 406 (1995): “Meth

18、ods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Inf

19、ormation technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific.

20、For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term vali

21、dity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. ETSI ETSI TS 186 022-1 V3.1.1 (2015-10)63 Definitions and abbreviations 3.1 Definitions For the purposes of the pr

22、esent document, the terms and definitions given in ETSI TS 124 615 1, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4 and in particular, the following defined in ISO/IEC 9646-1 3 apply: Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to

23、 a given specification, stating which capabilities have been implemented NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system b

24、ecomes an ICS Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification NOTE: This may contain additional information. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 615 1 and the following apply:

25、 ICS Implementation Conformance Statement IUT Implementation Under Test PICS Protocol ICS SCS System Conformance Statement SUT System Under Test 4 Conformance to this PICS pro forma specification 4.0 Introduction If it claims to conform to the present document, the actual PICS pro forma to be filled

26、 in by a supplier shall be technically equivalent to the text of the PICS pro forma given in clause 4, and shall preserve the numbering/naming and ordering of the pro forma items. A PICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance with the guid

27、ance for completion given in clause 4.1. 4.1 Guidance for completing the PICS pro forma 4.1.1 Purposes and structure The purpose of this PICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 124 615 1 may provide information about the

28、 implementation in a standardized manner. The PICS pro forma is subdivided into clauses for the following categories of information: - guidance for completing the PICS pro forma; - identification of the implementation; - identification of the ; - global statement of conformance; ETSI ETSI TS 186 022

29、-1 V3.1.1 (2015-10)7- roles: - user role: - major capabilities; - network role: - major capabilities. 4.1.2 Abbreviations and conventions The PICS pro forma contained in this clause is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item colu

30、mn The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Status column The following notatio

31、ns, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. Reference column The reference column mak

32、es reference to ETSI TS 124 615 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementatio

33、n. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates

34、 that the whole clause or the whole table is not required to be completed if the predicate is FALSE. 4.1.3 Instructions for completing the PICS pro forma The supplier of the implementation shall complete the PICS pro forma in each of the spaces provided. In particular, an explicit answer shall be en

35、tered, in each of the support column boxes provided, using the notation described in clause 4.1.2. However, the tables containing in “user role“ clause shall only be completed for user implementations, and the tables containing in “network role“ clause shall only be completed for network implementat

36、ions. If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately. ETSI ETSI TS 186 022-1 V3.1.1 (2015-10)8More detailed instructions are given at the beginning of the different clauses of the PICS pro forma. 4.2 Identification of the implementation

37、4.2.0 Introduction Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client in

38、formation should both be filled in if they are different. A person who can answer queries regarding information supplied in the ICS should be named as the contact person. 4.2.1 Date of the statement . 4.2.2 Implementation Under Test (IUT) identification IUT name: . . IUT version: . 4.2.3 System Unde

39、r Test (SUT) identification SUT name: . . Hardware configuration: . . . Operating system: . 4.2.4 Product supplier Name: . Address: . . . ETSI ETSI TS 186 022-1 V3.1.1 (2015-10)9Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . 4.2.5 Client (if different from pr

40、oduct supplier) Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . 4.2.6 PICS contact person (A person to contact if there are any queries concerning the content of the ICS) Name: . Telephone number: . Facsimile number: . ETSI ETSI TS 186 022

41、-1 V3.1.1 (2015-10)10E-mail address: . Additional information: . . . 4.3 Identification of the ETSI TS 124 615 This PICS pro forma applies to the following standard: ETSI TS 124 615: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Commu

42、nication Waiting (CW) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol Specification (3GPP TS 24.615 Release 10)“ 1. 4.4 Global statement of conformance Are all mandatory capabilities implemented? (Yes/No) . NOTE: Answering “No“ to this question indicates non-conformance to the ETSI TS

43、 124 615 specification. Non-supported mandatory capabilities are to be identified in the PICS, with an explanation of why the implementation is non-conforming, on pages attached to the PICS pro forma. 4.5 Roles Table 4.1: Roles Item Item description Reference Status Support 1 User 4.5.2.1/1 o.12 Net

44、work 4.5.2.4/1 o.1o.1: It is mandatory to support exactly one of these items. Comments: 4.6 User role 4.6.0 Introduction This clause contains the PICS pro forma tables related to the user role. They need to be completed only for user implementations: Prerequisite: 4.1/1 - user role ETSI ETSI TS 186

45、022-1 V3.1.1 (2015-10)114.6.1 Major capabilities Table 4.2: User related requirements and options Item Item description Reference Status Support 1 Does the User Equipment of the user B indicates to the user that the outgoing communication is being treated as a waiting communication? 4.5.5.3.2/1 o 2

46、Does the User Equipment of the user C indicates to the user that the outgoing communication is being treated as a waiting communication? 4.5.5.3.4/1 o 3 Is the User Equipment of the user B able to send a Communication Waiting indication in a 180 Ringing and send the Alert-Info header with the value

47、? 4.5.5.3.2/1 o 4 Does the User Equipment of the user B accepts and understands the XML CW MIME attachment and notify the user? 4.5.5.3.2/1 o 5 Does the User Equipment of the user B starts timer TUE-CW? 4.5.5.3.2/1 o 6 Does the User Equipment of the user B uses the value of the Expires header receiv

48、ed in the INVITE request? 4.5.5.3.2/1 c21 C21: IF x.2/1 THEN m ELSE n/a - incoming call Comments: 4.7 Network role 4.7.0 Introduction This clause contains the PICS pro forma tables related to the Network role. They need to be completed only for network implementations: Prerequisite: 4.1/2 - network

49、role 4.7.1 Major capabilities Table 4.3: Network related requirements and options Item Item description Reference Status Support 1 Is the CW condition determined by the AS based on the receipt of a 180 (Ringing) response with an Alert-Info header field set to “urn:alert:service:call-waiting“? 4.5.5.2/1 o 2 Is the CW condition determined by the AS based on validation of the “approaching NDUB“ condition? 4.5.5.2/1 o 3 Does the AS initiate the procedures for the provision of an announcement to the calling? 4.5.5.2/1