ETSI TS 186 025-2-2011 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) IMS PES Performance Benchmark Part 2 Subsystem Configuratio_1.pdf

1、 ETSI TS 186 025-2 V2.2.1 (2011-06)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);IMS/PES Performance Benchmark;Part 2: Subsystem Configurations and BenchmarksETSI ETSI TS 186 025-2 V2.2.1 (2011-06)2Reference RTS/TISPAN-06062-

2、NGN-R2 Keywords IMS, ISDN, performance, PSTN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice In

3、dividual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Docu

4、ment Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the

5、current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be repr

6、oduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of E

7、TSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the

8、GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 025-2 V2.2.1 (2011-06)3Contents Intellectual Property Rights 5g3Foreword . 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 7g33 Definitions and abbreviations . 7g33.1 Definit

9、ions 7g33.2 Abbreviations . 8g34 System Under Test (SUT) 9g35 Use cases 11g35.1 ISDN Use cases 11g35.1.1 ISDN - ISDN Use case 1 11g35.1.1.1 ISDN - ISDN Scenario 1.1 Basic call with BC = speech - enblock sending . 11g35.1.1.2 ISDN - ISDN Scenario 1.2 Basic call with BC = speech - enblock sending . 11

10、g35.1.1.3 ISDN - ISDN Scenario 1.3 Basic call - overlap sending with BC = speech . 11g35.1.1.4 ISDN - ISDN Scenario 1.4 Basic call with BC = 3,1 KHz audio - Fax with 33,6 kbit/s 11g35.1.1.5 ISDN - ISDN Scenario 1.5 Basic call with BC = 3,1 KHz audio - Fax with 14,4 kbit/s 11g35.1.1.6 ISDN - ISDN Sce

11、nario 1.6 Basic call with BC = 3,1 kHz with PI#3 11g35.1.1.7 ISDN - ISDN Scenario 1.7 Basic call with BC = 3,1 kHz with PI#3 11g35.1.1.8 ISDN - ISDN Scenario 1.8 Basic call with BC = 3,1 kHz - Modem V.32 bis (4,8 kbit/s, 9,6 kbit/s 14,4 kbit/s) 11g35.1.1.9 ISDN - ISDN Scenario 1.9 Basic call with BC

12、 = 3,1 kHz - Modem V.34 (up to 33,6 kbit/s) 12g35.1.1.10 ISDN - ISDN Scenario 1.10 Basic call with BC = UDI - enblock sending. 12g35.1.1.11 ISDN - ISDN Scenario 1.11 Basic call with BC = UDI - enblock sending. 12g35.1.1.12 ISDN - ISDN Scenario 1.12 - called user is user determined user busy . 12g35.

13、1.1.13 ISDN - ISDN Scenario 1.13 - no answer from the called user 12g35.1.2 ISDN- PSTN Use case 2 . 12g35.1.2.1 ISDN - PSTN Scenario 2.1 Basic call with BC = speech - enblock sending 12g35.1.2.2 ISDN - PSTN Scenario 2.2 Basic call with BC = speech - enblock sending . 12g35.1.2.3 ISDN - PSTN Scenario

14、 2.3 Basic call - overlap sending with BC = speech . 12g35.1.2.4 ISDN - PSTN Scenario 2.4 Basic call with BC = 3,1 KHz audio - Fax with 33,6 kbit/s 12g35.1.2.5 ISDN - PSTN Scenario 2.5 Basic call with BC = 3,1 KHz audio - Fax with 14,4 kbit/s 12g35.1.2.6 ISDN - PSTN Scenario 2.6 Basic call with BC =

15、 3,1 kHz - Modem V.32 bis (4,8 kbit/s, 9,6 kbit/s 14,4 kbit/s) 13g35.1.2.7 ISDN - PSTN Scenario 2.7 Basic call with BC = 3,1 kHz - Modem V.34 (up to 33,6 kbit/s) 13g35.1.2.8 ISDN - PSTN Scenario 2.8 - called user is user determined user busy . 13g35.1.2.9 ISDN - PSTN Scenario 2.9 - no answer from th

16、e called user . 13g35.1.3 PSTN - ISDN Use Case 3 . 13g35.1.3.1 PSTN - ISDN Scenario 3.1 Basic call, the call is released from the calling user 13g35.1.3.2 PSTN - ISDN Scenario 3.2 Basic call, the call is released from the called user . 13g35.1.3.3 PSTN - ISDN Scenario 3.3 Basic call with BC = 3,1 KH

17、z audio - Fax with 33,6 kbit/s 13g35.1.3.4 PSTN - ISDN Scenario 3.4 Basic call with BC = 3,1 KHz audio - Fax with 14,4 kbit/s 13g35.1.3.5 PSTN - ISDN Scenario 3.5 Basic call with BC = 3,1 KHz audio - Modem V.90 . 13g35.1.3.6 PSTN - ISDN Scenario 3.6 - called user is user determined user busy . 13g35

18、.1.3.7 PSTN - ISDN Scenario 3.7 - no answer from the called user . 14g35.1.4 PSTN - PSTN Use case 4 . 14g35.1.4.1 PSTN - PSTN Scenario 4.1 Basic call, the call is released from the calling user . 14g35.1.4.2 PSTN - PSTN Scenario 4.2 Basic call, the call is released from the called user . 14g35.1.4.3

19、 PSTN - PSTN Scenario 4.3 Basic call with Fax with 33,6 kBit/s (Super G3 Fax) . 14g35.1.4.4 PSTN - PSTN Scenario 4.4 Basic call with Fax with 14,4 kBit/s . 14g35.1.4.5 PSTN - PSTN Scenario 4.5 Basic call with BC = 3,1 KHz audio - Modem V.34 (up to 33,6 kbit/s) 14g3ETSI ETSI TS 186 025-2 V2.2.1 (2011

20、-06)45.1.4.6 PSTN - PSTN Scenario 4.6 Basic call with BC = 3,1 KHz audio - Modem V.32 bis (4,8 kbit/s, 9,6 kbit/s 14,4 kbit/s) . 14g35.1.4.7 PSTN - PSTN Scenario 4.7 - called user is user busy . 14g35.1.4.8 PSTN - PSTN Scenario 4.8 - no answer from the called user . 14g35.2 Metrics and design object

21、ives 15g35.2.1 Delay probability - non-ISDN or mixed (ISDN - non-ISDN) environment . 15g35.2.2 Speech quality analysis . 18g35.3 Call Profiler Traffic Patterns 19g35.3.1 Saw Tooth . 19g35.3.2 Blast 19g35.3.3 Rolling Blast . 20g35.3.4 Ramp . 20g35.3.5 Steady Call Rate . 20g35.3.6 Poisson Distribution

22、 20g35.4 Load Concepts and Definitions 21g35.4.1 Processor Load 21g35.4.2 Reference Call and Workload Factors 21g3Annex A (informative): Calls flows . 23g3Annex B (informative): Load profiles examples 30g3Annex C (informative): Load traffic calculation . 31g3C.1 General . 31g3C.2 Calculation base on

23、 originated/ terminated traffic . 31g3C.3 ITU-T load definitions 32g3C.3.1 Reference loads 32g3C.3.1.1 Reference load on incoming interexchange circuits . 32g3C.3.1.2 Reference load on subscriber lines (originating traffic) 32g3C.4 High load reserve . 33g3C.5 Overload . 33g3Annex D (informative): Te

24、st reports . 34g3D.1 Example of a Call Detail report 34g3D.2 Example of a call summary report . 35g3D.3 Example of a voice summary report . 35g3D.4 Example of a voice quality detail report. 36g3Annex E (informative): Bibliography . 37g3Annex F (informative): Change history . 38g3History 39g3ETSI ETS

25、I TS 186 025-2 V2.2.1 (2011-06)5Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR

26、 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR P

27、olicy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This T

28、echnical Specification (TS) has been produced by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 2 of a multi-part deliverable covering the IMS/NGN Performance Benchmark, as identified below: Par

29、t 1: “Core Concepts“; Part 2: “Subsystem Configurations and Benchmarks“; Part 3: “Traffic Sets and Traffic Profiles“; Part 4: “Reference Load network quality parameters“. ETSI ETSI TS 186 025-2 V2.2.1 (2011-06)61 Scope The present document is for an initial release of a PSTN/ISDN Emulation Sub-syste

30、m (PES) performance benchmark. The same tests can be used also for legacy PSTN/ISDN networks or for inter-working tests between PSTN/ISDN emulation subsystem and legacy PSTN and ISDN. The metrics measured and reported are for performance of this subsystem under a communications application load. The

31、 present document is the second part of the multi-part deliverable which consists of four parts. TS 186 025-1 1 contains the overall benchmark descriptions, architectures, processes, and information models that are common to all specific benchmarking scenarios. The present document contains the spec

32、ific benchmarking use-cases and scenarios, along with scenario specific metrics and design objectives. It also defines the SUT configuration parameters. This part also contains any required extensions to the overall descriptions present in the present document, if necessary for the specific scenario

33、. TS 186 025-3 i.1 defines an initial benchmark test through the specification of a traffic set, traffic-time profile and benchmark test procedure. TS 186 025-4 i.2 defines Reference Load network quality parameters for the use cases defined in the present document. 2 References References are either

34、 specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are

35、 not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced d

36、ocuments are necessary for the application of the present document. 1 ETSI TS 186 025-1: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IMS/PES Performance Benchmark; Part 1: Core Concepts“. 2 ITU-T Recommendation Q.543: “Digital exchange performa

37、nce design objective“. 3 ETSI TS 183 036: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); ISDN/SIP interworking; Protocol specification“. 4 ETSI TS 124 229: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications

38、 System (UMTS); LTE; IP multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3 (3GPP TS 24.229)“. 5 ETSI TS 183 043: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IMS-based PSTN

39、/ISDN Emulation; Stage 3 specification“. ETSI ETSI TS 186 025-2 V2.2.1 (2011-06)72.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TS 186 025-3: “Tele

40、communications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IMS/PES Performance Benchmark Part 3 : Traffic Sets and Traffic Profiles“. i.2 ETSI TS 186 025-4: “Telecommunications and Internet Converged Services and Protocols for Advanced Networking (TISPAN); IMS/PES

41、 Performance Benchmark; Part 4: Reference Load network quality parameters“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: background load: workload applied to an SUT during a benchmark test, for the purpose of con

42、suming SUT resources during a benchmark test and changing the traffic intensity at which the capacity of the SUT is reached benchmark report: document generated at the conclusion of a test procedure containing the metrics measured during the execution of the test and/or computed from the data collec

43、ted in the benchmark log benchmark test: procedure by which a test system interacts with a System Under Test to measure its behaviour and produce a benchmark report configuration: specification of a subset of IMS/PES architectural elements and metrics for which collection of benchmark tests can be d

44、efined design objective: probabilistic model of delay and failure requirements for SUT, associated with a use-case, specified by threshold values and probabilities for delay and scenario failure. idle load: load that is not dependent on the traffic or other external activities maximum capacity: maxi

45、mum processor load that a processor can handle without rejecting new calls metric: performance measurement of SUT reported in a benchmark report parameter: attribute of a SUT, test system, system load, or traffic set whose value is set externally and prior to a benchmark test, and whose value affect

46、s the behaviour of the benchmark test processor load: part of time the processor executes work, normally expressed in percent NOTE: The processor load consists of Idle load, Traffic load and Usage load. Reference Call (RC): basic ISUP to ISUP call connected through two MGW in the same MGC domain tes

47、t parameters: parameters whose values determine the behaviour of a benchmark test test procedure: specification of the steps to be performed by a benchmark test test scenario: specific path through a use-case, whose implementation by a test system creates a system load test system: collection of har

48、dware and software which presents a system load to a system under test and collects data on the system under tests performance, from which metrics can be computed traffic load: load that results from handling traffic events that are directly related to calls; this load varies with the traffic intens

49、ity traffic-time profile: evolution of the average scenario over a time interval ETSI ETSI TS 186 025-2 V2.2.1 (2011-06)8traffic set: mixture of traffic scenarios usage load: load that is reserved for the administrations operation and maintenance activities during busy hour workload: number of reference calls per second (RC/s) NOTE: It is calculated by multiplying calls per second by its corresponding WLF. workload factor: traffic load for different types of calls in relation to the traffic load of the reference call (ISUP call) 3.2 Abbreviations For the