FORD A-1-2011 DRAWING FORMS (Version 28).pdf

1、 FECDS A-1 Engineering CAD also see Standard E-1. When a parts material is not affected by a revision, the methods above are still required. G Release Authority Identifier: Enter the Electronic Release Authority Number which authorizes design release/change. Not required for Manufacturing drawings.

2、It is permissible for a supplier/partner to include its internal change authority number ONLY; within parenthesis, and placed above the Ford Motor Company Electronic Release Authority Number. See Figure A-2.20. H Trademark Field: The Ford Motor Company trademark. Original Issue: 19960419 Copyright,

3、Ford Motor Company. Latest Re-issue: 20110630A112 Printed copies are uncontrolled.ENGINEERING CAD for Product Engineering the department number may be entered). For joint projects, the LVEA team will add the LVEAs corporate name, e.g., “Volvo Car“. BD PLANT Field: Name of plant(s) or plant code(s) o

4、r GSDB (Global Supplier Data Base) code(s) the drawing is appointed to for Manufacturing drawings. It is permissible to use the GSDB code for Product Engineering Drawings. To obtain Supplier Engineering Office GSDB codes, see http:/ BE DESIGN Field: Insert the CDS ID of the person who designed the O

5、BJECT model data. If no CDS ID is available, initials are to be used. BF DETAIL Field: Insert the CDS ID of the person who detailed the drawing. If no CDS ID is available, initials are to be used. BG CHECKED Field: Insert the CDS ID of the person who checked the drawing. If no CDS ID is available, i

6、nitials are to be used. Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20110630A114 Printed copies are uncontrolled.ENGINEERING CAD see Figure A-1.5. For CTM, insert Y or N; Y replaces the requirement of the Inverted Delta Symbol; see Figure A-1.5.1. BM MFG DATA NO. Identif

7、ier: Insert the Manufacturing Data Number. Manufacturing Offices will enter the number utilizing the appropriate method described in Standard B-2. See Standard B-2 for details. 3.7 INSTRUCTIONS TO COMPLETE THE ABBREVIATED TITLE BLOCK FOR ADDITIONAL SHEETS. 3.7.1 The first sheet of all drawings must

8、use the Full Title Block (Figure A-1.5). Either the Full Title Block or Abbreviated Title Block for additional sheets (Figure A-1.6) must be employed on subsequent sheets. The Abbreviated Title Block when employed on A4 formats will be reduced to the same text font size as the regular A4 title block

9、. No revision block or revision block header will be used on sheets which employ the Abbreviated Title Block for additional sheets. Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20110630A115 Printed copies are uncontrolled.ENGINEERING CAD & DRAFTING STANDARDS Return to TOC

10、 Figure A1.6 Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20110630A116 Printed copies are uncontrolled.ENGINEERING CAD & DRAFTING STANDARDS Return to TOC Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20110630A117 Printed copies are uncontrolled.

11、3.8 SUPPLIER/partner PREPARED DRAWINGS 3.8.1 CONFIDENTIAL INFORMATION Supplier/Partners providing technical data to Ford Motor Company are required to provide it in compliance with Ford Motor Company PRODUCTION PURCHASING GLOBAL TERMS AND CONDITIONS (PPGTC) requirements dated January 1, 2004, paragr

12、aph 17. To access the PPGTC see https:/ 3.8.1.1 Technical Data For definition and ownership of Technical Data, see the PPGTC, paragraph 16.01. https:/ 3.8.1.2 Level I Technical Data Materials 3.8.1.2.1 All technical data submitted to Ford Motor Company for internal release into a globally accessed r

13、epository may only be accepted by Ford Motor Company or its Asssociated Companies as Level I Material and must be submitted free of restrictive markings, such as “ CONFIDENTIAL“, “PROPRIETARY“ or “COPYRIGHT“ claims, etc. For Level I Material definition see the PPGTC, paragraph 16.02. https:/ 3.8.1.3

14、 Level II Technical Data Materials 3.8.1.3.1 Under no circumstances may Level II Material be accepted by Ford Motor Company for release into a globally accessed repository. Level II Material may only be used internally by Ford Motor Company or its Associated Companies. For Level II Material definiti

15、on see the PPGTC, paragraph 16.03. https:/ If a supplier submits Level II information or restrictive markings to Ford Motor Company on a drawing, it should be rejected and immediately removed from any such global repository. Engineering and Purchasing shall contact the supplier to resolve any issues

16、 with the supplier in regard to removal of the Level II information. ENGINEERING CAD & DRAFTING STANDARDS Return to TOC 3.8.2 SUPPLIER/PARTNER DRAWING OPTIONS 3.8.2.1 Manufacturing activities will accept drawings from supplier/partners only on the Standard Ford Motor Company Formats. Supplier/Partne

17、r information may be identified outside of the format. See Figure A-1.7. Figure A1.7 Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20110630A118 Printed copies are uncontrolled.ENGINEERING CAD & DRAFTING STANDARDS Return to TOC 3.8.2.2 Product Engineering activities will ac

18、cept CAD drawings from supplier/partners only on the Standard Ford Motor Company Formats. Supplier/partner information may be entered in the area identified, enclosed in a box with a maximum height of 100mm and a maximum width equal to the Ford Motor Company title block. This is the preferred option

19、 for Product Engineering supplier/partners. See Figure A-1.8. 3.8.2.2.1 Supplier/Partner information within the prescribed area will contain the suppliers name, suppliers responsible engineering office GSDB code, up-to-date supplier main office contact information and supplier engineering approval a

20、nd date. Part usage, unique revision columns are not permitted, Supplier standards or other external standards not previously authorized by the Ford Motor Company Engineering CAD and Drafting Standards Committee are not permitted within the Supplier/Partner information area. 3.8.2.3 Supplier/Partner

21、 information may be considered optional if a supplier demonstrates to the design activity that it is capable of producing a drawing as if Ford Motor Company had produced it. If the supplier/partner information is omitted, then the supplier/partners responsible engineering office GSDB code MUST be in

22、serted in the PLANT box in the title block. See ITEM BD, Figure A-1.5. Figure A1.8 Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20110630A119 Printed copies are uncontrolled.Return to TOC ENGINEERING CAD & DRAFTING STANDARDS 3.8.2.4 All activities shall use the following m

23、ethod when a supplier/partner submits a non-CAD drawing. Non-CAD is defined in this Standard as including: 3.8.2.4.1 Hardcopy, aperture cards, Mylar, manual drawings, etc. 3.8.2.4.2 Rasterized drawing data. 3.8.2.4.3 Data that needs translation into Ford Motor Company required CAD format. 3.8.2.5 Fi

24、gure A-1.9 is used when a supplier/partner submits a drawing that does not include the appropriate Ford Motor Company Standard notes. For example, when a supplier/ partner will only provide their drawing, drawn on their format. Figure A1.9 4.SPECIFICATIONS (RESERVED) 5.ADDENDUM (RESERVED) Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20110630A120 Printed copies are uncontrolled.