1、 Ford Proprietary and/or Confidential Information - Do not distribute to others w/o prior written authorization. Appendix N Engineering CAD FOR SINGLE GOLD TERMINAL = XX.XX N . CONNECTOR NOTES F-2 Para. 3.5.2.2 1. PARTS CONFORM TO THE ELECTRICAL CONNECTION SYSTEM DESIGN SPECIFICATION (SDS) VER.XX 4.
2、 MAXIMUM MATING FORCE FOR SINGLE TIN TERMINAL = XX.XX N; FOR SINGLE GOLD TERMINAL = XX.XX N . 11. For sealed interfaces only: SEALING SURFACES AS IDENTIFIED ON THIS DRAWING ARE SMOOTH AND FREE OF PARTING LINES 12. CONNECTOR IS RATED AS ERGONOMIC CLASS (1, 2, OR 3) BASED ON USCAR-25 REV 1. CONNECTOR
3、PUSH SURFACE AREA IS (X SQUARE mm) HEADER NOTES F-2 Para. 3.5.3.2 1. PARTS CONFORM TO THE ELECTRICAL CONNECTION SYSTEM DESIGN SPECIFICATION (SDS) VER.XX 5. MAXIMUM MATING FORCE FULLY POPULATED WITH TIN TERMINALS = XX.XX N; WITH GOLD TERMINALS = XX.XX N . 11. For sealed headers only: SEALING SURFACES
4、 AS IDENTIFIED ON THIS DRAWING ARE SMOOTH AND FREE OF PARTING LINES Original Issue: 20090630 Copyright, Ford Motor Company. Latest Re-issue: 20111231Appendix N5 Printed copies are uncontrolled.ENGINEERING CAD & DRAFTING STANDARDS Return to TOC Original Issue: 20090630 Copyright, Ford Motor Company.
5、Latest Re-issue: 20111231Appendix N6 Printed copies are uncontrolled.FASTENER MATERIAL IDENTIFICATION NOTE F-7 Para. 3.5 MATERIAL MUST CONFORM TO WA 950 PROPERTY CLASS _ FASTENER 1217 FORM NOTE F-7 Para. 3.6.1 THIS UTILITY FASTENER MAY BE USED ACROSS MULTIPLE PROGRAMS, CHANGES TO THIS DRAWING REQUIR
6、E SUBMISSION OF A CHANGE REQUEST FORM IN ACCORDANCE WITH FAP03-117 FASTENER FINISH NOTE F-7 Para. 3.6.1.4 FOR SURFACE FINISH REQUIREMENTS SEE ENGINEERING NOTICE AND WX100 SIMILAR FASTENER NOTE F-7 Para. 3.7.1.1 ALL UNSPECIFIED FEATURES AND REQUIREMENTS MUST CONFORM TO W_ NON-WORLDWIDE FASTENER NOTE F-7 Para. 3.7.2.1 MUST COMPLY WITH SPECIFICATION WH901 AND WH902 FROM THE WORLDWIDE FASTENER STANDARDS or, MUST COMPLY WITH ISO 8677 S900 FINISH NOTE F-7 Para. 3.12.1 FOR S900: FINISH _ PER _ FASTENER ASY FINISH NOTE F-7 Para. 3.12.2 SURFACE FINISH APPLIES TO PART A ONLY. PART B IS UNFINISHED
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1