FORD ESB-M1H528-A-2009 FABRIC KIRK PATTERN (Knit) TO BE USED WITH FORD WSS-M99P1111-A 《KIRK图案（针织）织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 01 06 N-STATUS No Replacement B. Haggart, FNA 2002 07 25 Revised Updated & Renumbered 1991 05 22 Released NB00I10043054088 R. G. Moore B. C. Ferns Printed copies are uncontrolled Page 1 of 2 Copyright 2

2、009, Ford Global Technologies, Inc. FABRIC, KIRK PATTERN (Knit) ESB-M1H528-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specifications is a Kirk pattern tricot knit bodycloth of good quality and uniform composition. 2. APPLICATION This specification was released originally f

3、or material used as an interior trim fabric for the 1993 Taurus GL. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of ESB-M8P1-G. When this fabric is bonded to foam in a laminate construction, the laminate must meet engineering requirements of E

4、SB-M8P13-B. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10 % tolerance (ASTM D 3887) Wales 14. wales/cm Courses 2

5、4.5 courses/cm 3.2.2 Fabric Weight, range 295 - 390 g/m2(FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in ESB-M8P1-G Fabric 100 % Polyester ENGINEERING MATERIAL SPECIFICATION ESB-M1H528-A Page 2 of 2 Copyright 2009, Ford Global Technologies, Inc. 3.4 YARN CONSTRUCTION (ASTM D 1

6、244) Face (A) 7.8 tex f 24 (polyester, dull) (B) 7.8 tex f 24 (polyester, bright-deep dye) Middle (E) 7.8 tex f 24 (polyester, bright-deep dye) (F) 7.8 tex f 24 (polyester, dull) Back (I) 7.8 tex f 48 (polyester, semi-dull) 3.5 METHOD OF DYEING Piece dyed 3.6 FINISHING OPERATIONS Dye, dry, nap, shear, heatset inspect 3.7 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute