FORD ESB-M2P43-A-2008 PAINT QUALITY CORROSION RESISTANT VISIBLE - EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《涂料质量 耐腐蚀可视 外部用 和FORD WSS-M99P1111-A一起使用(使用 FORD WSS-M2P180-C FORD .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver. 4 2008 08 28 N-STATUS Replaced by WSS-M2P180-C G. Weber, FNA 2003 08 11 Revised Para 3.0 inserted; Para 3.4 & 4 deleted 1963 11 05 Released AS1 #1142 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, Inc. Page 1 o

2、f 2 PAINT QUALITY, CORROSION RESISTANT VISIBLE EXTERIOR ESB-M2P43-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE This specification defines the performance requirements for a finish for visible exterior parts where good corrosion resistance is a primary and initial appearance a secondary requirement. 2. A

3、PPLICATION This specification was released originally for a finish used on truck bumpers and running boards. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1

4、111-A). 3.1 SYSTEM COMPONENTS . Zinc phosphate coating per ESB-M3P1-A. . Baked primer. . Baked alkyd enamel color coat. 3.2 FILM PROPERTIES 3.2.1 Color (FLTM BI 109-01) Shall match Ford Motor Company master panel. 3.2.2 Gloss, min 80 (FLTM BI 110-01) 3.2.3 Dry Film Thickness, min (FLTM BI 117-01) Pr

5、imer 0.0005 in (13 m) Enamel 0.0015 in (38 m) ENGINEERING MATERIAL SPECIFICATION ESB-M2P43-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, Inc. Page 2 of 2 3.2.4 Initial Hardness Shall be sufficiently cured at time of packing to withstand normal handling and shipping with

6、out marring. 3.2.5 Adhesion No flaking or chipping (FLTM BI 106-01) 3.3 DURABILITY PROPERTIES 3.3.1 Salt Spray Resistance, min 168 h (FLTM BI 103-01) 3.3.2 Water Resistance, min 168 h (FLTM BI 104-01) No blistering or dulling. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification 5.1 MANUFACTURING ENGINEERING REFERENCE Applicable Process Standard C-312 5.2 MATERIAL REFERENCES Primer ESB-M6J71 ESB-M6J72 ESB-M6J88 Enamel ESB-M2J100 quality