1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver. 4 2008 08 28 N-STATUS No Replacement Named G. Weber, FNA 2003 08 12 Revised Para 3.0 inserted; Para 3.4 & 4 deleted 1963 10 24 Released AS1 #1124 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, Inc. Page 1 of 2
2、PAINT PERFORMANCE, EXTERIOR PARTS LESS COLOR COAT ESB-M2P47-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE This specification defines the performance requirements for a paint finish for visible exterior parts supplied without color coat. 2. APPLICATION This specification was released originally for a fini
3、sh on visible exterior service or production parts to which color coat is to be subsequently applied to meet ESB-M2P4 or ESB-M2P5 requirements. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements
4、For Production Materials (WSS-M99P1111-A). 3.1 SYSTEM COMPONENTS . Zinc phosphate coat ESB-M3P1 . Baked primer surfacer, min 0.0010 in (25 m) 3.2 The primed part, when properly processed and color coated as detailed in para 3.3, shall pass all requirements of ESB-M2P4 or ESB-M2P5, as applicable. 3.3
5、 The part as received shall be processed as follows: . Wet sand with 360 paper. . Wash off sanding sludge with tap water, using a final thorough rinse with deionized or distilled water. . Blow off excess moisture and dry in oven at 121 C or higher. . Wipe with M-14J147 naphtha, and tack off. Apply 0
6、.0015 in (38 m) minimum color coat as follows, using previously tested and approved batches: ESB-M2P5: ESB-M30J100 Quality Black ESB-M2P4: ESB-M32J100 Quality Black . Bake at standard baking schedule for color coat. ENGINEERING MATERIAL SPECIFICATION ESB-M2P47-A Printed copies are uncontrolled Copyr
7、ight 2008, Ford Global Technologies, Inc. Page 2 of 2 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 MANUFACTURING ENGINEERING REFERENCE Applicable Process Standard C-293 5.2 MATERIAL REFERENCE Service parts only ESB-M6J62 Service or production parts Primers referenced or released under applicable end-use specification.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1