FORD ESB-M99C114-A-2010 OIL - FLUORINATED - GENERAL PURPOSE TO BE USED WITH FORD WSS-M99P1111-A 《通用氟化油 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev. 22010 01 13 Revised See Summary of Revisions A. Wedepohl, NA 2004 01 29 Revised Para 3.0 inserted; para 3.1, 3.10, 3.11, 3.12, 4 deleted 1988 11 29 Released CAS1-RD362669-1 Printed copies are uncontrolled Copyright 2010, Ford Global Techn

2、ologies, LLC Page 1 of 2 OIL - FLUORINATED - GENERAL PURPOSE ESB-M99C114-A 1. SCOPE The material defined by this specification is a general purpose clear, colorless, odorless fluorinated oil intended for use in applications where high temperature resistance, non-flammability, or non-reactivity is re

3、quired. The oil will not burn, decompose or react to form gummy or solid deposits. 2. APPLICATION The specification was released originally for material used as an anti-stick by applying the lubricant to the vent window weather-strip rubber to prevent the rubber sticking to the painted surface. This

4、 material is compatible with all other elastomeric materials. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 COLOR Clear, Colorless 3.3 VISCOSIT

5、Y 40 C 144 - 176 mm2/s (ISO 3104/ASTM D 445) 100 C 16.1 - 19.7 mm2/s 4. GENERAL INFORMATION The information below is provided for clarification and assistance in meeting the requirements of this specification. This specification was written for the specific oil as indicated on the approved source li

6、st. The following are properties of the fluid that may be inherent or checked only as needed. 4.1 VISCOSITY 20 C 522 mm2/s (ISO 3104/ASTM D 445) 40 C 160 mm2/s 100 C 18 mm2/s 204 C 3.1 mm2/s 4.2 OIL VISCOSITY INDEX 124 4.3 FLASH POINT Does not ignite (ISO 2592/ASTM D 92, Cleveland Open Cup) 4.4 ODOR

7、 None 4.5 DENSITY, AT 15.6 C 1.91 g/mL (ASTM D 891, Method B) ENGINEERING MATERIAL SPECIFICATIONESB-M99C114-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 4.6 POUR POINT -36 C (ISO 3016/ASTM D 97) 4.7 OIL VOLATILITY 121 C 1% max (ASTM D 2595, % in 22 hour

8、s) 204 C 7% max 4.8 LUBRICANT PAINT STAINING No stain or softening (FLTM BJ 126-01) Painted surfaces can be repaired with no evidence of “fish eyes“, crawling, or other visible paint defects. This was confirmed in 1992 with current production body paint systems. See approval documents for details. S

9、oft cloths moistened with naphtha or denatured alcohol were able to provide adequate cleaning even though the fluorinated oil is not soluble in these liquids Test Method: Apply a thin film of lubricant to panels freshly painted with ESB-M50J100 enamel per FLTM BJ 107-03. Allow 1 h air dry at 23 +/-

10、2 C and 50 - 55% relative humidity. Wipe the lubricant with a soft cloth moistened with naphtha. Repaint with enamel and examine for paint defects. 4.9 STORAGE AND SHELF LIFE When stored in a clean, dry place with containers closed to avoid contamination, shelf life should be indefinite. 5. SUMMARY

11、OF REVISIONS 2010 01 13 Removed petroleum color method. Added Clear, Colorless Moved flash point, density, pour point, and lubricant paint staining to General Information since they are material properties and the product is not formulated to meet them. Volatile content replaced with Oil Volatility with a different test method.