FORD ESE-M96B68-A1-2002 CERAMIC FIBER MAT MOLDABLE TO BE USED WITH FORD WSS-M99P1111-A 《可模压陶瓷纤维毡 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2002 08 15 Revised Updated and renumbered 1986 12 10 CE34RD863100221 Revised & Retyped 1979 04 11 CAH3-DR741280-E Released Printed copies are uncontrolled Page 1 of 2 Copyright 2002, Ford Global Technologies

2、, Inc. CERAMIC FIBER MAT, MOLDABLE ESE-M96B68-A1 ESE-M96B68-A2 1. SCOPE The material defined by this specification is a moldable ceramic fiber supplied as a moistened sheet. After forming into its final configuration it is cured by air drying to retain the expected shape. The dried fiber material is

3、 suitable for noise and vibration damping and high temperature insulation up to 1260 C. 2. APPLICATION This specification was released originally for material used as a noise and vibration damper between the heat shield and shell of the catalytic converter. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS

4、FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 CONSTRUCTION The fiber mat material is composed of an aqueous slurry of inorganic alumina-silica fibers, precipitating agents, inorganic bi

5、nders and flocculating agents. The fiber mat is formed by processing the slurry through a multiple small opening cavity fixture which forms a continuous wet fibrous matrix. The fibrous mat is cut or molded to a specific size and packaged in a moist state in aluminum foil. This provides a flexible sh

6、eet that can be hand molded to the desired shape, then cured in service. 3.3 ORIGINAL PROPERTIES ESE-M96B68-A1 ESE-M96B68-A2 Moisture, % 42 62 42 - 62 Organic Binder, % 2 5 4 - 8 Inorganic Fibers, % 42 48 38 - 50 Test Method: Place 10 g sample into a previously weighed and ignited porcelain crucible

7、. Heat in a mechanical convection oven at 102 106 C for 3 h. Cool in desiccator, weigh and calculate % moisture (weight loss). Heat same crucible in a muffle furnace at 810 C for 4 h. Cool in desiccator, weigh and calculate % organic binder (weight loss) and % inorganic fibers (residue). ENGINEERING

8、 MATERIAL SPECIFICATION ESE-M96B68-A1/A2 Page 2 of 2 Copyright 2002, Ford Global Technologies, Inc. 3.4 CURED PROPERTIES 3.4.1 Chemical Composition (Emission Spectrographic Analysis) ESE-M96B68-A1 ESE-M96B68-A2 SiO2 50 - 56 48 - 58 A12O3 44 - 50 37 - 45 Fe2O3 1.5 max 1.2 max CaO 0.2 max 1.0 max MgO 0.5 max 0.7 max 3.4.2 Density, kg/m3 192 - 255 232 - 248 Test Method: Using test method and sample size per ASTM C 167, determine density of the inorganic fiber mat, after ignition loss of moisture and organic binder.