FORD ESF-M99E16-A-2002 TUBING PAPER AND ALUMINUM - FLEXIBLE - SPIRAL WOUND TO BE USED WITH FORD WSS-M99P1111-A 《盘绕式柔性纸和铝管件 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2002 09 17 Revised Updated and renumbered 1980 09 22 Metricated & Retyped #CE3J-RD782440-E SUPP #35 1968 05 17 Released F6-3440 Printed copies are uncontrolled Page 1 of 2 Copyright 2002, Ford Global Technol

2、ogies, Inc. TUBING, PAPER AND ALUMINUM - FLEXIBLE - SPIRAL WOUND ESF-M99E16-A 1. SCOPE The material defined by this specification is a kraft paper and aluminum composite spiral wound hose. 2. APPLICATION This specification was released originally for material used as a hot air inlet tube in the carb

3、uretor air cleaner system. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 CONSTRUCTION Shall be constructed of 3 plies, an inner and outer layer

4、 of kraft paper and a center layer of rolled aluminum. The paper shall be securely bonded to the aluminum with a polyethylene adhesive. 3.3 PAPER AND ADHESIVE (Prior to fabrication) 3.3.1 Thickness, Total 0.0058-0.0065 in (0.147-0.165 mm) (ASTM D 645) 3.3.2 Breaking strength, min (ASTM D 828) WMD 25

5、 lb/in (4.4 N/mm) of width AMD 14 lb/in (2.5 N/mm) of width 3.3.3 Basis Weight, min 65 lb/3000 ft2 (106 g/m2) (ASTM D 646) 3.4 ALUMINUM ALLOY (Prior to fabrication) SAE AA 1100 - H 19 Temper Extra hard Thickness, min 0.002 in (0.05 mm) ENGINEERING MATERIAL SPECIFICATION ESF-M99E16-A Page 2 of 2 Copyright 2002, Ford Global Technologies, Inc. 3.5 ADHESION (Paper to Aluminum on finished hose) To be specified on engineering drawing.