FORD FLTM AZ 105-02-2016 TEST FUEL FORMULATIONS.pdf

1、 FORD LABORATORY TEST METHOD AZ 105-02 Date Action Revisions Rev. 7 2016 07 05 Revised See Revisions Section L. Wetekamp, NA 2013 12 11 Revised Added CM85A, CE15A, and WSS-M99C130-A T. Covert, NA 1997 11 21 Activated J. Spencer Controlled document at www.MATS Copyright 2016, Ford Global Technologies

2、, LLC Page 1 of 4 TEST FUEL FORMULATIONS Application This test method describes the formulations required for preparing various test fuels. These test fuel blends are used to determine permeation and fuel compatibility of various materials used in automotive fuel systems. These fuels do not contain

3、the additive packages (detergents, antioxidants, lubricity modifiers, etc.) found in most commercial fuels. Their use in engineering testing protocols should take this into consideration. Nomenclature and Terminology Fuel Designation Format XY#(Y2#)Z where X = Base fuel (a list of base fuel codes is

4、 below) Y = Oxygenate (a list of oxygenate fuel codes is below) # = Volume percent of oxygenate Y2 = Second oxygenate (a list of oxygenate fuel codes is below) Z = Impurity (a list of impurity fuel codes is below) Base Fuel Codes (X) A = reference fuel A (100% iso-octane) B = reference fuel B (70% i

5、so-octane, 30% toluene) C = reference fuel C (50% iso-octane, 50% toluene) D = reference fuel D (60% iso-octane, 40% toluene) E = reference fuel E (100% toluene) F = reference fuel F (diesel fuel, Grade #2, 100%) G = reference fuel G (fuel D 85%, anhydrous denatured ethanol 15%) H = reference fuel H

6、 (fuel C 85%, anhydrous denatured ethanol 15%) I = reference fuel I (fuel C 85% anhydrous methanol 15%) K = reference fuel K (fuel C 15%, anhydrous methanol 85%) These reference fuels are described in ASTM D471/ISO 1817. The fuel typically used for materials testing has been reference fuel C. FORD L

7、ABORATORY TEST METHOD AZ 105-02 Copyright 2016, Ford Global Technologies, LLC Page 2 of 4 Oxygenate and Alternative Fuel Codes (Y) Several oxygenates (alcohols and ethers) are in use or have been identified as potential candidates for use in reformulated gasolines. The most common include: M = metha

8、nol E = ethanol ME= methyl tertiary butyl ether EE = ethyl tertiary butyl ether TE = tertiary amyl methyl ether Higher molecular weight alcohols (isopropyl and t-butyl) and ethers (diisopropyl and ethyl t-amyl) may find some usage. Alcohol based alternative fuels will consist of blends of ethanol (0

9、 - 85%) or methanol (0 - 85%) and with a hydrocarbon mixture such as unleaded gasoline (15 - 30%). Impurity Codes (Z) P = auto-oxidized fuel A = aggressive (mixture information is provided below) Preparation of auto-oxidized fuel is described in ISO 4639-3 annex A. Nomenclature Examples: XY#Z = CM15

10、A = 85% aggressive reference fuel C +15% aggressive methanol Aggressive Mixtures When making an aggressive mixture, for instance CM85A, 15% aggressive fuel C and 85% aggressive methanol would be used. Fuel Blends for Elastomers and Thermoplastics* *Aggressive blends recommended for thermoplastics. F

11、uel C Auto-oxidized fuel (sour gas), PN 180, per ISO 4639-3 annex A. CM15A per SAE J1681 CM30A per SAE J1681 CM50A per SAE J1681 CM85A per SAE J1681 CE22A per SAE J1681 CM20A/ME15 E93A per XE-M4CX652-93A B10, Do not add aggressive pack to XE-M4CX754-B10-A B30, Do not add aggressive pack to XE-M4CX73

12、2-B30B Aggressive B10 per XE-M4CX754-B10-A Aggressive B30 per XE-M4CX732-B30-B High aromatic gasoline represents field fuel Gasoline long term storage Methanol aggressive fuel Methanol aggressive fuel Methanol aggressive fuel Methanol aggressive fuel Ethanol aggressive fuel MTBE Aggressive Brazil fi

13、eld fuel BioDiesel (APA, EU) BioDiesel (NA, SA) Aggressive BioDiesel (APA, EU) Aggressive BioDiesel (NA, SA) FORD LABORATORY TEST METHOD AZ 105-02 Copyright 2016, Ford Global Technologies, LLC Page 3 of 4 Fuel Blends for Metals and Coated Metals Fuel C Auto-oxidized fuel (sour gas), PN 180, per ISO

14、4639-3 annex A. CM15A per SAE J1681 CM85A per SAE J1681 CE10A per SAE J1681 CE15A per SAE J1681 CE25A per SAE J1681 CE85A per SAE J1681 E93A per XE-M4CX652-93A Ultra Low sulfer diesel with 15 ppm sulfur max B10A per XE-M4CX754-B10-A B30A per XE-M4CX732-B30-B Urea per WSS-M99C130-A High aromatic gaso

15、line represents field fuel Gasoline long term storage Methanol aggressive fuel Methanol aggressive fuel Ethanol aggressive fuel Ethanol aggressive fuel Ethanol aggressive fuel Ethanol aggressive fuel Aggressive Brazil field fuel USA Diesel market fuel Aggressive BioDiesel (APA, EU) Aggressive Biodie

16、sel (NA, SA) Diesel Exhaust Fluid (DEF) Additional local market fuels may be required Ford Approved Fuel Suppliers: Gage Products, Haltermann Solutions. Consult Fuels and Lubes Department for any sourcing questions. Conditioning and Test Conditions All test values indicated herein are based on mater

17、ial conditioned in a controlled atmosphere of 23 +/- 2 C and 50 +/- 5% relative humidity for not less than 24 h prior to testing and tested under the same conditions unless otherwise specified. Chemicals, materials, parts, and equipment referenced in this document must be used and handled properly.

18、Each party is responsible for determining proper use and handling in its facilities. Summary of Revisions 2016 07 05 Commonized testing fuels with WSS-M98P14 and WSS-M2P194-A1 Added: B10A per XE-M4CX754-B10-A Added reference to SAE J1681 for aggressive methanol and ethanol formulations Removed one n

19、omenclature example and aggressive mixture details for Water, Fuel C, Methanol or Ethanol 2013 12 11 Added: CM85A Added: CE15A Added: Urea per WSS-M99C130-A 2009 08 11 Removed: CM10A Removed: CM85A Removed: Low sulfur diesel (Phillips 66 Diesel with .05 sulfur) FORD LABORATORY TEST METHOD AZ 105-02

20、Copyright 2016, Ford Global Technologies, LLC Page 4 of 4 Added: Fuel C Added: CM15A Added: CE25A Added: E93A per XE-M4CX652-93A Added Ultra Low sulfur diesel with 15 ppm sulfur max Added: B30A per XE-M4CX732-B30-B 2008 04 22 Revised Oxygenate and Alternate Fuels; Impurity and Fuel Blends for Elastomers and Thermoplastics