FORD FLTM BN 108-02-2017 RESISTANCE TO ABRASION - TABER ABRASER.pdf

1、 FORD LABORATORY TEST METHOD BN 108-02 Date Action Revisions Rev. 3 2017 07 07 Revised See Summary of Revisions A. Collins, NA 2001 09 11 Revised Editorial no technical change A. Cockman 1996 04 26 Activated Controlled document at www.MATS Copyright 2017, Ford Global Technologies, LLC Page 1 of 3 RE

2、SISTANCE TO ABRASION - TABER ABRASER Application This procedure is used to test the abrasion resistance of textile fabrics, coated fabrics, genuine leather, plastics, painted surfaces, tapes, all weather floor mats, carpets, and other floor covering materials. Apparatus and Materials Required Abrase

3、r Model 135, or equivalent, which meets the requirements of ASTM D3884. The abraser shall be equipped with a vacuum attachment. Specimen Holder Catalog No. E-100-125 108 mm O.D. Hold Down Ring Catalog No. E-100-101 108 mm I.D. Rubber Pad Catalog No. S-19. Clamp Plate 32 mm O.D. Diamond Wheel Refacer

4、 Model 250 or equivalent. Abrasive Discs Catalog No. S-11. Auxiliary Weights 500 g (Catalog No. 125769), 1000 g (Catalog No. 125770), or as specified by the applicable Engineering Material Specification. Wheels Type - Calibrade H-10 or H-18 for carpets, Calibrase CS-10 for all other materials unless

5、 otherwise designated by the Engineering Material Specification. Date: Use prior to expiration date stamped on wheels. Sources: Taber Instrument Corp. Erichsen GmbH hold the wheels by their outer edges. 6. Do not use sandpaper to round the corners of the wheels after refacing. 7. For more details, refer to Taber Wheel Refacing Options as seen from the manufacturer. Model Refacing Medium H-10 Diamond Tool Wheel Refacer H-18 Diamond Tool Wheel Refacer CS-10 S-11 Refacing Disc