1、FORD MANUFACTURING STANDARDS SBl-25 APRIL, 1990 100% NYLON REVERSIBLE KNIT GLOVES SBl-25 Page 1 1. 2. 3. 4. 5. 6. 7. . USAGE : These gloves are general purpose gloves for use by employees in areas requiring a lint free environment such as painting operations. The use of these gloves must be approved
2、 by the Safety Unit. MATERIAL: The glove bodies of both sizes are to be knit of 1 end of 2/300 multifilament superconditioned 100% nylon yarn. All SBl-nylon knit gloves shall have a minimum of 12 courses of rubber, cotton covered yarn knitted into the glove to form an incorporated mist. Wrist overca
3、sting shall be 2/300 nylon yarn. SIZE: Large shall be 9 inches (229mm) overall from tip of middle finger to glove base. Width of the palm at the thumb crotch shall be 3-3/4 inches (95unn) and the wrist shall be 3-l/4 inches (83mm) in length. Small shall be 8 inches (203atm) overall from tip of middl
4、e finger to glove base. Width of the palm at the thumb crotch shall be 3-3/4 inches (95mm) and the wrist shall be 3 inches (76mm) in length. CONSTRUCTION : Gloves ara to be produced seamless, reversible in style with the wist incorporated on a knitting machine. WEIGHT OF EACH GLDVR: Large - 15 grams
5、 Small - 13 grams RECIAIMING : When used in painting applications, these gloves should be only single use. In all other applications, these gloves shall be impervious to proper laundering procedures over a prudent recycling span. It is recommended that these gloves not be patched. MANUFACTURERS R&SPONSIBILIN: All material supplied to this standard II&C biequivalent in all characteristics to the material upon which approval was originally granted and shall be satisfactory for the intended application.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1