FORD U-MB098-8006-01-1996 SALT - SODIUM CHLORIDE《盐类 氯化钠》.pdf

1、Manufacturing Standards MB 1. 2. 3. 4. 4.1 4.2 4.3 4.4 Salt - Sodium Chloride Scope The materials defined by this Ford Manufacturing Standard are the specific grades of Salt, Sodium Chloride. -. Application - U-MB098-800641 U-MB098-800642 U-MB98-8W03 Generally used in water softening processes and o

2、ther applications where this grade is acceptable. For use in salt spray test apparatuses in laboratories and paint shop For spreading on roads etc. before or during snow, ice or frost. amS. Ij Re(uirements . . , , I - ,I I . . - . -0I grade It shall consist of not less than 99,6% crystalline sodium

3、chloride. In FOB: Dried Vacuum Salt to BS 998. -02 grade It shall be undenatured sodium chloride (NaCI) substantially free of Nickel and Copper and containing on the dry basis not more than 0.1% sodium iodide (NaI) and not more than 0.3% of total impurities meeting the requirements of ASTM B i 17. -

4、03 grade It shall be a commercially available grade of rock sait. In FOB: Rock Sait to BS 3247. Substance restrictions Substance restrictions imposed by law, regulations or Ford, apply to the items addressed by this document. The restrictions are defined in Ford Engineering Materials Specification:

5、“Substance Use Restrictions“-WSS-M99F9999-A 1. Silicone Exclusion See: Ford Manufacturing Standard: “Standard Requirements Applicable to Procurement of Non-Production Materials, Machines and Equipment“ - W-MXX. All non-production materials used directly in vehicle painting oyerations shall be silico

6、ne free, including but not limited to filters, hoses, masking paper and tape, polishing and aero- sol products. The test for silicone contamination would be determined by using Ford Laboratory Test Method BI 125-01. User Information - Storage, Disposai and Use Empty containers shall not be pierced o

7、r disposed of with general rubbish that may be incin- erated. Disposal of full (obsolete) / panially used containers must be in accordance with Company Procedures / legal requirements which is dependent upon composition classification - haz- ardous i non-hazardous. Environmental Control The -03 grade should only be used when alternatives are not available or due to safety requirements alternatives are not considered as effective. Manufacturing Administration October 1996 Maintenance Materials Chemicals, Inorganic U-MB098-8006-0 1 -03 -03 Page 1 of 1