FORD W-TA0-2001 TOOLS《工具》.pdf

1、 Printed copies are uncontrolled. Page 1 of 3 TOOLS PURPOSE. This standard is issued to consolidate the location of adopted external industry manufacturing standards within the Tools standard category. STANDARD NUMBER REPLACED STANDARD NAME EXTERNAL STANDARD NO. EXTERNAL STANDARD NAME TC1X Carbide I

2、nserts Design & Reference Data ISO 1832 - 1991 ISO 883 - 1985 IS0 3364 - 1997 Indexable Inserts for cutting tools Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole TC5 Insert Tool H

3、olders ANSI B212.5 - 1994 Metric Holders for Indexable Inserts TDX Tool Drills Design & Reference Data ISO 5419 - 1982 ISO 7079 1981 ISO 2306 - 1972 ISO 866 1975 ISO 2540 1973 Twist drills Terms, definitions and types Core drills with parallel shanks and with Morse taper shanks Drills for use prior

4、to tapping screw threads Centre drills for center holes without protecting chamfers Type A Centre drills for centre holes with protecting chamfer Type B (continue) Standard Number w-TA0 Issue Date: 19990331 Global Manufacturing Standards Rev: 20010309 Printed copies are uncontrolled. Page 2 of 3 STA

5、NDARD NUMBER REPLACED STANDARD NAME EXTERNAL STANDARD NO. EXTERNAL STANDARD NAME TDX (cont.) Tool Drills Design & Reference Data ISO 2541 1972 ISO 3292 - 1995 Centre drills for centre holes with radius form Type R Extra-long parallel shank twist drills TGX Gear Cutting Tools - Hobs ANSI B94.7 - 1980

6、 (R1987) ANSI B92.1 - 1970 (R1993) ANSI B92.2M - 1980 (R1989) AGMA 120.01 Hobs Involute Splines & Inspection Metric Module Involute Splines Gear Cutting Tools Fine & Course Pitch Hobs TR1 Reamers Design and Reference Data ISO 521 - 1975 ISO 5420 1983 Machine chucking reamers with parallel shanks or

7、Morse taper shanks Reamers Terms, definitions and types TTX Taps Design and Reference Data ISO 529 - 1983 ISO 2283 1972 ISO 2857 - 1973 ISO 5967 1981 ISO 5969 - 1979 Short machine taps and hand taps Long shank machine taps with nominal diameters 3 to 24 mm and 1/8 to 1 inch Ground thread taps for IS

8、O metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches Taps and thread cutting Nomenclature of the main types and terminology Ground thread taps for pipe threads G series and Rp series (continue) Standard Number w-TA0 Issue Date: 19990331 Global Manufacturing Standards Rev: 200

9、10309 Printed copies are uncontrolled. Page 3 of 3 STANDARD NUMBER REPLACED STANDARD NAME EXTERNAL STANDARD NO. EXTERNAL STANDARD NAME TTX (cont.) Taps Including Metric ISO 8051 1999 Long shank taps with nominal diameters from M3 to M10 Full diameter shank taps with recess Internal Ford Motor Compan

10、y activities may obtain industry standards directly through the RLIS Global Standards Service Website at ( External suppliers may obtain industry Standards directly from the issuing Standards Development Organization, or from the sources listed below. AUTOWEB COMMUNICATIONS INC. INFORMATION HANDLING SERVICE (IHS) U. S. Help Desk 616-396-0880 U.S./Canada 1-800-716-3447 European Help Desk 44 207-977-1048 International Help Desk 1-303-397-2896 Standard Number w-TA0 Issue Date: 19990331 Global Manufacturing Standards Rev: 20010309