1、FORD WORLDWIDE FASTENER STANDARDDate: 1993-01-01Engineering Standards & 1 of 2 Printed copies are uncontrolled .Systems Engineering (ESSE)WE 962Material and Performance of Steel Blind Anchor Nuts1. SCOPE.This standard covers the material and minimum performance requirements of steel round or hexagon
2、albodied blind anchor nuts in the range M4 to M10 inclusive.1.1 REFERENCES.WSD-M1A283-B1, B2, B3, B4, B43, B47, B48, B49 or B57 - Steel, cross reference for standardparts.2. MATERIAL.The material for blind anchor nuts shall be steel in accordance with WSD-M1A283 B1, B2, B3, B4, B43,B47, B48, B49 or
3、B57.3. PERFORMANCE.When assembled in a panel of thickness equal to the maximum thickness recommended by themanufacturer for the blind anchor nut to be tested, using assembly equipment and settings approved byFord, blind anchor nuts shall meet the requirements for Push Out, Torque to Turn, and Pull O
4、ut asspecified in Table 1.The direction of testing is shown in Figures 1, 2 and 3 as appropriate.TEST BOLT / MANDRELHEAD STYLE IS NOTIMPORTANTFORD WORLDWIDE FASTENER STANDARDDate: 1993-01-01Engineering Standards & 2 of 2 Printed copies are uncontrolled .Systems Engineering (ESSE)WE 962Material and P
5、erformance of Steel Blind Anchor NutsTable 1. Nut type, material and performanceNom Size Type Material Push-OutMin (kN)Torque to Turn Min(Nm)Pull-OutMin (kN)M4 Round Steel 1 0.8 4.4Hex Steel 0.9 2.2 4.4M5 Round Steel 1.4 1.4 7.1Hex Steel 1.2 4.7 7.1M6 Round Steel 1.8 4 10Hex Steel 1.7 7.9 10M8 Round Steel 1.8 4.5 18.3Hex Steel 1.5 20 18.3M10 Round Steel 3 5.5 29Hex Steel 2.6 41 29
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1