FORD WG103-2005 RIVETS - MULTI-GRIP SPLIT SELF PLUGGING PULL MANDRELS WITH SECONDARY LOCKING FEATURE CATEGORY 540 660《带附属锁定功能的开口式自插销双鼓型（MULTI-Grip）抽芯铆钉 类别540 660》.pdf

1、 WORLDWIDE FASTENER STANDARDDate: 2005-11-01 Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 1 WG 103 RIVETS - MULTI-GRIP SPLIT SELF PLUGGING PULL MANDRELS WITH SECONDARY LOCKING FEATURE CATEGORY 540.660 Nom. Size Shaft Diameter d Recess Underhead Dimension R

2、Head Diameter D Head ThicknessK Rivet Length LPanel Thickness S Mand.ColorCode Ford Part Numbers min - max Depth H1 nom Dia. H2 nom min - max min - max min - max max over up to and incl. 11.86 S1 2.54 5.08 Blue W525170 4.8 4.70 - 4.84 1.9 5.1 Radius 11.45 - 12.63 2.97 - 3.47 S2 0.50 6.35 0.10 - 0.51

3、 21.94 S1 10.16 12.7 Yellow W525171 S2 6.35 14.6 12.31 - 13.59 3.64 - 4.14 13.59 S1 2.54 5.08 Blue W525172 Swell Neck S2 0.50 5.50 6.66 - 6.86 13.59 S1 2.54 5.08 Yellow W525173 6.4 6.30 - 6.50 2.9 6.4 diameter S2 0.50 5.50 x x 15.23 - 16.51 4.22 - 4.72 18.39 S1 6.50 9.50 Green W525174 8 - 12 S2 5.50

4、 10.0 degrees 24.56 S1 12.7 15.7 Silver W525175 S2 10.0 16.5 Mandrel breakload min: For 4.8 Rivets - 6.00 KN, For 6.4 Rivets - 9.34 KN Panel Thickness Codes: S1 - Primary grip range - No mandrel protrusion after set. Pushout after set - 445 N for 4.8 rivet; 556 N for 6.4 rivet. S2 - Extended grip ra

5、nge - Mandrel protrusion if S S1 min. Pushout after set - 111 N for 4.8 rivet; 222 N for 6.4 rivet. Material: Rivet Body: SAE J454 5056 Aluminum, Temper F-H32 Mandrel: Steel - Zinc coated, 3 micrometres min., Subsequent treatments permitted. See, WG 950 Foreword. Recommend Hole Sizes: For 4.8 rivets 4.88 - 4.98. For 6.4 rivets 6.53 - 6.63 It is important to use the correct nose piece/tooling when setting these rivets. Example Description: W525170 RIVET 4.8 MULTI-GRIP SPLIT