FORD WK 902 APPENDIX A-2013 DIMENSIONS MATERIAL AND HEAT TREATMENT AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS.pdf

1、 WORLDWIDE FASTENER STANDARD WK 902 Appendix A Date: 2013 05 23 Printed copies are uncontrolled Copyright 2013, Ford Global Technologies, LLC Page 1 of 3 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS 1. SCOPE This appendix covers the performance and pa

2、rt numbers of heavy duty spring band hoseclamps in a range of nominal sizes between 13 mm and 61 mm inclusive, for application within a temperature range from -40 C to +150 C. Figure 2 T and U clip clamps are shown for reference only. These clamps are not to be used for new designs. 2.4.1 CLIP The d

3、esign of the clip used for pre-opened clamps shall be such that it retains the clamp open to a diameter of DPO min. The clip shall stay in place during normal handling and storage. The clip shall be removable during assembly using a suitable simple tool (e.g. pliers, flat blade screwdriver or clip r

4、elease tool) recommended by the clamp manufacturer and approved by Ford. Note: THESE LOOSE CLIP CLAMPS ARE NOT TO BE USED FOR NEW DESIGN. CLAMPING FORCE VALUES Heavy duty spring band hoseclamps shall meet the clamping force values specified in (Table 4 for PO and POPP). The clamping force will be me

5、asured for a nominal diameter Dnusing a four-channel measurement device (four-segment load cell) which acts evenly in four directions. The four transducers must ensure a line-shaped practically frictionless contact to the spring band hoseclamp. The measured values of channels Fx1+Fx2 as well as Fy1+

6、Fy2 are to be added up. The four individual force values must be evaluated independently of each other. WORLDWIDE FASTENER STANDARD WK 902 Appendix A Date: 2013 05 23 Printed copies are uncontrolled Copyright 2013, Ford Global Technologies, LLC Page 2 of 3 Table 4 - Minimum effective clamping forces

7、 at Dnfor Pre-Opened or Pre-Opened/Pre-Positioned clamps Clamping Force 12mm Bands Clamping Force 15mm Bands15 mm Band DnFXminN FYminN F=FX-FYN Ref. FXmin N Fymin N F=FX-FYN Ref. 13 176 136 -10 140 195 150 10 120 14 176 136 -10 140 195 150 10 120 15 176 136 -10 140 195 150 10 120 16 176 136 -10 - 14

8、0 195 150 10 - 120 17 176 136 -10 140 195 150 10 120 18 280 224 -10 180 310 245 10 - 160 19 280 224 -10 180 310 245 10 - 160 20 280 224 -10 180 310 245 10 - 160 22 280 224 -10 180 310 245 10 - 160 23 280 224 -10 180 388 338 20 - 200 24 280 224 -10 180 388 338 20 - 200 25 352 312 0 220 390 345 20 - 2

9、00 26 352 312 0 220 390 345 20 - 200 27 352 312 0 220 390 345 20 - 200 28 352 312 0 - 220 390 345 20 - 200 29 352 312 0 220 390 345 20 - 200 30 352 312 0 220 390 345 20 - 200 32 352 312 0 220 390 345 20 - 200 34 352 312 0 220 390 345 20 - 200 35 352 312 0 220 390 345 20 - 200 36 352 312 0 220 390 34

10、5 20 - 200 38 352 312 0 220 390 345 20 - 200 39 352 312 0 220 390 345 20 200 40 352 312 0 220 390 345 20 200 41 480 400 0 - 240 530 440 20 240 42 480 400 0 240 530 440 20 240 43 480 400 0 240 530 440 20 240 44 480 400 0 240 530 440 20 240 46 480 400 0 240 530 440 20 240 47 480 400 0 240 530 440 20 2

11、40 49 480 400 0 240 530 440 20 240 50 480 400 0 240 530 440 20 240 51 480 400 0 240 530 440 20 240 53 480 400 0 240 530 440 20 240 54 480 400 0 240 530 440 20 240 55 480 400 0 240 530 440 20 240 58 480 400 0 240 530 440 20 240 61 480 400 0 240 530 440 20 240 WORLDWIDE FASTENER STANDARD WK 902 Append

12、ix A Date: 2013 05 23 Printed copies are uncontrolled Copyright 2013, Ford Global Technologies, LLC Page 3 of 3 Note: All clipped pre-opened clamps are not to be used for new design. Previous “thin” clamp part numbers for standard and clipless designs were moved to this Appendix A as well (only want

13、 to use thicker versions for new designs going forward). I.e., we are obsoleting the use of the SHADED part numbers below and replacing them with the NEW part numbers for thicker clamps: Table 5 Part Numbers Table 5: Part Numbers. 12 mm Wide Clamps 15 mm Wide Clamps Nominal Size Standard Clipless pr

14、e-opened Clipped pre-opened Standard Clipless pre-opened Clipped pre-opened 13 W527150 W527200 14 W527151 W527201 15 W527152 W527202 16 N/A W527234 17 W527153 W525853 W527203 18 W527154 W527204 19 W527155 W527205 20 W527156 W527206 22 W527157 W527207 23 W527158 W527208 24 W527159 W527209 25 W527160

15、W527210 26 W527161 W527211 27 W527162 W527212 28 N/A N/A 29 W527313 W527163 W527213 30 W527164 W527214 32 W527315 W527165 W527215 34 N/A W527230 35 W527166 W527216 36 W527318 W527167 W527217 38 W527168 W527218 39 N/A W527231 40 W527321 W527169 W527219 41 N/A N/A 42 W527170 W527372 W527220 43 N/A W527232 44 W527171 W527374 W527221 46 W527172 W527375 W527222 47 W527173 W527223 49 N/A W527233 50 W527174 W527224 51 W527175 W527225 53 W527176 W525876 W527226 54 N/A N/A 55 W527177 W527227 58 W527178 W527228 61 N/A N/A