1、 WORLDWIDE FASTENER STANDARD WM101 Date: 2010 03 11 Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 1 Revision: 2010 03 11 Updated: t dimension in table PLUG - SHORT, TAPER HEXAGON RECESS CATEGORY 090.230 Dimensions in mm, unless otherwise stated Dryseal Threa
2、d l s t w m y PART NUMBERS PTF SAE - Short max. min. max. min. min. min. +/- 0.5 Plain With WX201 Sealer 1/8“ x 27 7.1 6.6 5.15 5.03 3.7 1 6.0/7.5 4.5 W528100 W528110 1/4“ x 18 10.8 10.0 6.15 6.03 3.7 1 7.0/8.5 7.6 W528101 W528111 3/8“ x 18 10.8 10.0 8.19 8.04 4.7 2 10.0/11.5 9.7 W528102 W528112 1/2
3、 x 14 14.2 13.2 10.19 10.04 5.7 2 13.0/17.0 10.7 W528103 W528113 3/4“ x 14 14.5 13.5 14.23 14.05 5.7 2 18.0/23.5 16.3 W528104 W528114 1“ x 11- 18 17 17.23 17.05 7.7 2 21.0/25.0 19.0 W528105 W528115 Material: Steel to WSD-M1A283-B2/3/4/40/41/42. (Where leaded steel is used, Pb 0.35% max.) Thread: Dr
4、yseal Taper Thread PTF - SAE Short to SAE J476a before protective coating. Thread damage resulting from subsequent operations is acceptable provided WM 950 is satisfied. Sealer: The sealer material shall meet the requirements of WX201 Finish: WX 100 Performance: WM 950 - Leakage Test. Example Description: W528100 PLUG 1/8 PTF SAE SHRT W528110 PLUG 1/8 PTF SAE SHRT SE
