FORD WRS-M1H1245-A23-2016 FABRIC PHANTOM PATTERN FLAT WOVEN RECYCLED PIR PCR CONTENT WITH SOIL REPELLANT AND BACKCOATING TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2016 06 27 Released D. Murtonen NA Controlled document at www.MATS Copyright 2016, Ford Global Technologies, LLC Page 1 of 3 FABRIC, PHANTOM PATTERN, FLAT WOVEN, WRS-M1H1245-A23 RECYCLED, PIR/PCR CONTENT WITH SOIL REPELLANT AND BACKCOA

2、TING 1. SCOPE The material defined by this specification is a flat woven polyester face fabric containing a minimum of 25% PIR/PCR (Post industrial/post consumer) recycled yarn. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2017 MY seat in

3、sert . The fabric was originally approved as tri-laminated with foam and a backing scrim. 3. REQUIREMENTS 3.1 APPROVED SOURCES This specification requires the use of approved sources. Only the sources identified on the Ford Approved Source List (ASL) can be used when this specification is listed on

4、the drawing, CAD file, or other documents. The list of approved sources is located within Ford at or available externally through a Ford Materials Engineer. 3.2 APPEARANCE The color, pattern, and finish shall match the approved Corporate Design master sample. 3.3 FABRIC PERFORMANCE In addition to t

5、he requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-B1/B2/B3/B4/latest as applicable. 3.4 VEHICLE INTERIOR ENVIRONMENTAL PERFORMANCE Materials used in interior applications must meet the requirements outlined in WSS-M99P2222-D1/latest, Performance, Vehicle Interior Env

6、ironmental Quality Material/Component Requirements. Data must be included in material submission package. 3.5 CONDITIONING AND TEST CONDITIONS All test values are based on material conditioned for not less than 24 h prior to testing in a controlled environment of 23 +/- 2 C and 50 +/- 5% relative hu

7、midity. Testing of the material should occur in the conditioning environment or soon after removal. 3.6 FABRIC CONSTRUCTION 3.6.1 Fabric Count, - /+ 10 % tolerance (ASTM D3775) Warp 323 / 10 cm Fill 223 / 10 cm ENGINEERING MATERIAL SPECIFICATION WRS-M1H1245-A23 Copyright 2016, Ford Global Technologi

8、es, LLC Page 2 of 3 3.6.2 Fabric Weight, -/+7.5 % tolerance (FLTM BN 106-01) Face Fabric 375 g/m2 Backcoating 90 g/m2 Total Weight 465 g/m2 3.7 COMPOSITION (ASTM D629) Fabric 100% polyester Backcoating Acrylic 3.8 YARN CONSTRUCTION (ASTM D1244) 1 2 Warp 660T-144F-3 222T-72F-1 Texturized Texturized w

9、ith 100% recycled yarn 1 2 Fill 660T-144F-3 222T-72-1 Texturized Texturized Black Solution Dye if two-tone 100% recycled yarn 3 3 167T-36-1 167T-288 Texturized Texturized (Used for solid color) (Used for two-tone colors) 3.9 RECYCLED CONTENT Recycled yarn must contain a minimum of 25% recycled conte

10、nt PIR/PCR (Postindustrial/post consumer) as defined by WRS-M99P42-A2. The remaining portion of the material can come from virgin sources. Refer to the Approved Source List (ASL), for specific regional recycled levels for this material. Virgin yarn contains 100% virgin material. 3.10 METHOD OF DYEIN

11、G Piece dye (with solution dye for two tone colors) 3.11 FINISHED OPERATIONS Roll opening, PreSet, Dyeing, SR, Final Set, Backcoating, Inspection Any changes to the above process must be approved by Materials Engineering. 4. GENERAL INFORMATION The information given below is provided for clarificati

12、on and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only

13、. In the event of a Global Program or regional duplication, each regional location of the supplier for this specification must provide a construction package and be approved to meet this specification. 4.2 If yarn is locally sourced it must meet the above fabric construction, composition and yarn co

14、nstruction. The fabric must also meet the requirements of WSS-M8P18-B1/B2/B3/B4/latest. ENGINEERING MATERIAL SPECIFICATION WRS-M1H1245-A23 Copyright 2016, Ford Global Technologies, LLC Page 3 of 3 4.3 Global strategy for this fabric is to use tri-laminate/foam & scrim construction in all regions. 4.

15、4 APPROVAL OF MATERIALS Suppliers desiring approval of their materials shall first obtain an expression of interest from Purchasing, Design or Product Development, and Materials Engineering. The supplier shall submit a completed copy of their laboratory test reports, signed by a qualified and author

16、ized representative of the test facility, demonstrating full compliance with all the requirements of the Material Specification. Tested material samples must be available for review upon request and kept for a minimum of one year. Upon request, the supplier will review the associated quality control

17、 documents (Process Failure Mode and Effects Analysis, Control Plans, Certification testing) with Ford. 4.5 SUPPLIERS ONGOING RESPONSIBILITY All materials must be equivalent in all characteristics to the material upon which approval was originally granted. Prior to making any changes to the material

18、 originally approved, whether or not such changes affect the materials ability to meet the specification requirements, the supplier shall notify the affected Supplier Technical Assistance (STA), Purchasing, and Materials Engineering activities of the proposed changes (with reasons) by submission of

19、a completed Suppliers Request for Engineering Approval, SREA. For parts and components using Ford Engineering Material Specifications, all samples tested to the specifications for Design Verification (DV), Production Verification (PV) and Production Part Approval Process (PPAP) sign off must be kept

20、 until Job 1. 4.6 RESTRICTED SUBSTANCE MANAGEMENT STANDARD Substance restrictions imposed by regulations or Company direction applies to the materials addressed by this document. The restrictions are identified in the Restricted Substance Management Standard WSS-M99P9999-A1/latest which is updated yearly. It is the suppliers responsibility to comply with this standard on a continuing basis. 5. SUMMARY OF REVISIONS