FORD WSB-M1H607-A-2009 FABRIC PIXEL PATTERN KNITTED BACKCOATED TO BE USED WITH FORD WSS-M99P1111-A 《像素（PIXEL）图案的背部涂层的针织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 01 06 N-STATUS No Replacement B. Haggart, FNA 2003 01 24 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.10, 3.11, 4 deleted 1994 07 30 Released NB00I10043054350 B.H. Chen A.J. Stocki B.C. Ferns Printed co

2、pies are uncontrolled Page 1 of 3 Copyright 2009, Ford Global Technologies, Inc. FABRIC, PIXEL PATTERN, KNITTED, BACKCOATED WSB-M1H607-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a Pixel pattern knit bodycloth of good quality and uniform composition. 2. APP

3、LICATION This specification was released originally for material used as an interior trim fabric for the 1996 DN101. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSB-M8P1-H. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppli

4、ers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.3 FABRIC CONSTRUCTION 3.3.1 Fabric Count, +/- 5 % tolerance (ASTM D 3887) Wales 11.0 wales/cm Courses 17.0 courses/cm 3.3.2 Fabric Weight, min 550.0 g/m2(FLTM BN 106-01) ENGINEERING

5、 MATERIAL SPECIFICATION WSB-M1H607-A Page 2 of 3 Copyright 2009, Ford Global Technologies, Inc. 3.4 COMPOSITION (ASTM D 629) Tolerance as specified in WSB-M8P1-H Fabric 82.3 % Polyester 13.6 % Nylon 4.1 % Polypropylene Backoating Acrylic 3.5 YARN CONSTRUCTION (ASTM D 1244) Face (A) 16.7 tex f32 (pol

6、yester, semi-dull, round) (B) 16.7 tex f32 (polyester, dull, round) (C) 15.6 tex f40 (nylon, bright, round) Middle (D) 15.0 tex f52 (polypropylen, solution dyed) Back (F) 11.1 tex f33 (polyester, semi-dull, round) (G) 11.1 tex f33 (polyester, semi-dull, round) 3.6 METHOD OF DYEING Piece dyed 3.7 FIN

7、ISHING OPERATIONS Dye, dry, nap, shear, heatset 3.8 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute ENGINEERING MATERIAL SPECIFICATION WSB-M1H607-A Page 3 of 3 Copyright 2009, Ford Global Technologies, Inc. 3.9 STRETCH AND SET, %, range (SAE J855) Fabrics outside this range may be acce

8、pted provided they have been approved jointly by the Materials Engineering activity and the affected Design Engineering and Development activity. Stretch, range Wales Courses 6 - 30 10 - 35 Set, max* Wales Courses 12 14 *At no time shall the set exceed 40 % of the measured stretch unless approved jointly by the Materials Engineering activity and the affected Design Engineering and Development activity.