FORD WSE-M12G77-A-2012 BATT CERAMIC FIBER THERMAL INSULATOR TO BE USED WITH FORD WSS-M99P1111-A 《热绝缘器陶瓷纤维垫 与福特WSS-M99P1111-A 一起使用》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 03 2012 01 18 N Status No replacement named N. Benipal, NA 2006 08 24 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.9 and 4 1985 11 12 Released CE3PRD863100E179 Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Pag

2、e 1 of 2 BATT, CERAMIC FIBER, THERMAL INSULATOR WSE-M12G77-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a flexible insulating batt composed of a blend of alumina-silica ceramic fibers with an acrylic binder suitable for high temperature insulation up to 1260

3、 C. 2. APPLICATION This specification was released originally for a material used for a thermal insulator in the catalytic converter. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material

4、 suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.3 CONSTRUCTION This batt is composed of mineral fibers formed into a continuous web by a paper making process (Fourdrinier) to provide a uniform insulating surface. 3.4 COMPO

5、SITION Ceramic Fibers and other Oxides 88 - 94% Acrylic Binder 6 - 12% Test Method: Cut 10 g of sample into a previously ignited porcelain crucible. Condition at 102 +/- 3 C for 3 h. Record the weight. Heat in a muffle furnace at 980 +/- 28 C for 4 h. Cool, weight, and calculate % binder on basis of

6、 weight loss. Calculate % mineral fiber on basis of retained weight. 3.5 BASIS WEIGHT (ASTM D 646/ISO 536) NOMINAL * BASIS WEIGHT BASIS WEIGHT THICKNESS g/m2 kgm/279 m2 0.5 96 - 180 27 - 50 1.0 240 - 304 67 - 85 2.0 405 - 610 105 - 170 4.0 851 - 1443 238 - 403 NOTE: Basis weight shall be selected fr

7、om within the specified range. Specific limits to meet manufacturing and engineering requirements will form part of an agreed control plan for each application and its supplier. ENGINEERING MATERIAL SPECIFICATION WSE-M12G77-A Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 3.6 THICKNESS NO

8、MINAL * TEST METHOD* ISO 534 THICKNESS mm at 0.2 kPa mm at 50 kPa 0.5 0.74 1.4 0.45 0.6 1.0 1.40 2.03 0.9 1.15 2.0 2.67 3.56 1.7 2.3 4.0 - 3.5 4.6 NOTE: THICKNESS TEST METHOD - Cut a 101.6 mm x 101.6 mm sample of material; place on a platen with felt side up; place a 101.6 mm x 101.6 mm x 6.35 mm al

9、uminum plate of such weight to apply 1.82 kg per 0.09 m2 pressure; take reading to nearest 0.01 mm. Thickness shall be determined by either test method as appropriate to source. * At 55.2 kPa 3.7 HEAT STABILITY, max Shrinkage at 980 C 1.9% Test Method: Cut two strips 305 x 25 mm from the center of t

10、he specimen, one in each direction. Measure the strips to the nearest 0.25 mm. Place strips in a muffle furnace for 4 h at 980 +/- 28 C. Cool specimen to 23 +/- 2 C and measure the strips. Calculate the heat shrinkage from the change in length. 3.8 THERMAL CONDUCTIVITY, max (ASTM C 177, plied to 13

11、mm thick sample) 538 C mean temperature K = 0.66 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 CONSTRUCTION Fiber diameter 2 - 3 micrometers Fiber length 18 +/- 13 mm 5.2 THERMAL CONDUCTIVITY (ASTM C 177) W/M/C Mean Temperature “K“ Factor 316 C 0.42 538 C 0.55 760 C 0.81 982 C 1.15 1093 C 1.35