FORD WSK-M2G342-A-2009 ADHESION PROMOTER SILANE TO BE USED WITH FORD WSS-M99P1111-A 《硅烷增粘剂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M5B280-C5 FORD WSS-M5B280-C5］》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 05 29 N-STATUS Replaced by WSS-M5B280-C5 M. Mehandru, FNA 2003 02 18 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.12, 4 deleted 1992 08 03 Released EP00E1076303000 W.Scholz Conc. J. Schult Printed

2、copies are uncontrolled Page 1 of 2 Copyright 2003, Ford Global Technologies, Inc. ADHESION PROMOTER, SILANE WSK-M2G342-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a cleaner and adhesion promoter with a silane base. 2. APPLICATION This specification was rel

3、eased originally for material for preparing of bonding areas on glass, e.g. before application of the glass primer. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WS

4、S-M99P1111-A). 3.4 COLOR Any, but clear 3.5 SOLIDS, min 0.6 %(FLTM AU 101-01) 3.6 ASH, max 52 %(FLTM AU 101-01) 3.7 DENSITY AT 23 C 0.65 - 0.85 kg/L (ASTM D 1475) The density tolerance for any one supplier shall be +/- .05 kg/L, based on the recorded density of the originally approved sample. 3.8 OD

5、OR Shall be free from objectionable or irritating odors, both in the “as received“ condition and at application temperatures. ENGINEERING MATERIAL SPECIFICATION WSK-M2G342-A Page 2 of 2 Copyright 2003, Ford Global Technologies, Inc. 3.9 STORAGE STABILITY, min 5 months (From date of receipt at Ford M

6、otor Company) When stored in sealed unopened containers out of direct sunlight at ambient temperatures between 5 C and 32 C. The supplier must label each container to indicate expiration date of the material and production usage beyond expiration date is not permitted. 3.10 QUALITY The material shal

7、l be of uniform quality, free from foreign materials and properties detrimental to normal production use. 3.11 NON-INTERCHANGEABILITY OF MATERIALS Only approved materials from the same production source shall be used in conjunction with one another. 5. GENERAL INFORMATION The information below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 RELATED MATERIALS 5.1.1 Adhesion Primer, Polyurethane WSK-M2G343-A 5.1.2 Adhesive, Polyurethane WSK-M2G341-A1/A2