FORD WSK-M6J157-B-2012 PRIMER ADHESION ONE PACK 15 MICROMETRE FILM BUILD POLYPROPYLENE TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATIONMaterial Name Specification NumberDate Release No. Release/Revision1990-08-01 EP00E01031538000 Released KW conc. J.SchultWP 3948-a Page 1 of 4 PRIMER, ADHESION, ONE PACK, 15 MICROMETRE FILM WSK-M6J157-BBUILD, POLYPROPYLENE1. SCOPEThe mate rial defined by this speci

2、fication is a high flexible adhesionprimer for Polypropylene plastics.2. APPLICATIONThis specification was originally released for material used as adhesionprimer for Polypropylene bumpers.3. REQUIREMENTS3.1 STATISTICAL PROCESSSupplie rs must conform to the requirements of Ford Quality SystemStanda

3、rd Q-101. A mutually acceptable Control Plan as describedth erein is required for material/source approval. Appropriatestatist ical tools must be used to analyze process/product data sothat variation in the final product is continuously reduced.3.2 INFRARED SPECTROPHOTOMETRY AND/OR THERMAL ANALYSISF

4、ord Motor Company, at its option, may conduct infrared and/ortherma l analysis of material/parts supplied to this specification.The IR spectra and thermograms established for i nitial approval shallconst itute the reference standard and shall be kept on file at thedesignated material lab oratory. Al

5、l samples shall produce IR spectraand thermograms that correspond to the reference standard when testedunder the same conditions.3.3 CONDITIONINGAl l Tests according to this specification shall be performed in acontrolled atmosphere of 23 +/- 2 C and 50 - 65 % relative humidityif not otherwise speci

6、fied.3.4 COMPOSITION3.4.1 Resin: Synthetic resins and chlorinated polyolefins.3.4.2 Pigments: Pigments to obtain the desired properties for theadhesion primer.ENGINEERING MATERIAL SPECIFICATIONWSK-M6J157-BWP 3948-b Page 2 of 4 3.4.3 Solvent Emissions see Initial Sample +/- 1 %(ASTM D 3960)This r equ

7、irement is as determined by the United StatesEnvironmental Protection Agency Reference Method #24 and isonly applicable to materials used in the USA.3.5 MATERIAL PROPERTIES3.5.1 Non-volatile see Initial Sample +/- 1 %;(FLTM BI 102-01) min. 35 %The n on-volatile content shall be determined at a spray

8、viscosity of 20 s according to para 3.5.4.3.5.2 Density see Initial Sample +/- 0,02 g/mL(ASTM D 1475)3.5.3 Viscosity as supplied see Initial Sample +/- 5 s(FLTM BI 111-01)3.5.4 Spray Viscosity as specified by the supplier(FLTM BI 111-01, FC #4)The material can be reduced with Xylene (WSK-M14J239-A)

9、andButyl acetate (WSK-M14J228-B).3.5.5 Storage Stability: 90 daysDuri ng a storage of 90 days between 5 and 32 C temperaturethe m aterial as supplied shall not settle up or cakeinsol uble. After the storage the material must pass allspecification requirements.3.6 PREPARATION OF TEST PANELS3.6.1 Subs

10、tratePolypropylene as required on Engineering Drawing.3.6.2 Plastic Preparation (see also 5.1)The surface to be painted shall be cleaned by an acceptablepr ocess, e.g. power wash, to remove mold releasing agents,fingerprints, oils, dirt and moisture.3.6.3 Adhesion primer applicationDry film thicknes

11、s: 15 - 25 micrometre;Flash off time: 10 minutes at room temperature;Baking: not required.ENGINEERING MATERIAL SPECIFICATIONWSK-M6J157-BWP 3948-b Page 3 of 4 3.6.4 Primer Surfacer (if required)Wet on wet application of a primer surfacer, film thicknessand baking as specified in the relevant material

12、specification.3.6.5 Top coat applicationApplication of currently used two pack high flex ible top coatsyst ems, filmthickness and baking as specified in therelevant material specification.3.6.6 AgeingTest panels prepared under this specification shall be agedfor at least 168 h at 23 +/- 2 C or 16 h

13、at 45 + /- 1 C beforetesting for resistance properties.3.7 APPEARANCE (Primer only)3.7.1 Colour light grey(FLTM BI 109-01)3.7.2 Gloss matt3.8 RESISTANCE PROPERTIESTest Panels and plastic parts painted according to para 3.6 of thisspecification shall meet all requirements of performancespecification

14、WSK-M2P145-A.3.10 QUALITYThe primer must be adaptable for application in accordance with theappropriate Ford Motor Company Process Specifica tion. The primer mustbe compatible with all related materials.3.11 SUPPLIERS RESPONSIBILITYAll materials supplied to this specification must be equivalent inal

15、 l characteristics to the material upon which approval wasoriginally granted.Pr ior to making any changes in the properties, composition,co nstruction, color, processing or labelling of the materialorig inally approved under this specification, whether or not suchchange s affect the materials abilit

16、y to meet the specificationrequir ements, the Supplier shall notify Purchasing, Toxicology andthe affected Materials Engineering activity of the proposed changesand obtain the written approval of the Materials Engineeringactivity. Test data, test samples and a new code identification areto be submit

17、ted with the request.ENGINEERING MATERIAL SPECIFICATIONWSK-M6J157-BWP 3948-b Page 4 of 4 Substance restrictions imposed by law, regulations or Ford apply tothe materials addressed by this document. The restrictions are definedin Engineering Material Specification WSS-M99P9999-A1, unless adi fferent

18、suffix (e.g., A2 or A3) is specified on the engineeringdocument for the application.4. APPROVAL OF MATERIALSMat erials defined by this specification must have prior approval by theresponsible Materials Engineeri ng activity. Suppliers desiring approval ofthe ir materials shall first obtain an expres

19、sion of interest from theaffect ed Purchasing, Design and Materials Engineering activity. Uponrequest, the supplier shall submit to the affected Materials Engineeringactivity its own laboratory rep ort to the specification (test results, notnominal values), the material designation and code number,

20、and testspecimen s for Ford evaluation. Upon approval, the material will be addedto the Engineering Material Approved Source List. 5. GENERAL INFORMATIONThe information given below is provided for assistance and clarificationand does not represent requirement(s) to this specification.5.1 PRETREATMENTA pre treatment e.g. by flame process, corona discharge or plasmatreating, may be necessary prior to painting to provide sufficientadhesion to meet all specification requirements.5.2 DENSITY OF THE DRY FILM see Initial Sample(FLTM BI 154-02) +/- 0,02 kg/L