FORD WSS-M11G29-A3-2004 DECORATIVE WOOD VENEER ELM ULMUS AMERICANA CROWN CUT TO BE USED WITH FORD WSS-M99P1111-A 《径切割的美国榆(ULMUS AMERICANA)纹路切割的饰面薄板 与标准FORD WSS-M99P1111-A一起使用 列.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 10 25 Activated C. Bezant Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 1 DECORATIVE WOOD VENEER, ELM, ULMUS AMERICANA, BURL CUT WSS-M11G29-A DECORATIVE WOOD VENEER ELM, ULMUS AMERICANA, QUARTER C

2、UT WSS-M11G29-A2 DECORATIVE WOOD VENEER, ELM, ULMUS AMERICANA, CROWN CUT WSS-M11G29-A3 1. SCOPE These specifications define wood veneers for use as decorative product on interior wood veneer assemblies. A = Elm Ulmus americana, Burl Cut A2 = Elm Ulmus americana, Quarter Cut A3 = Elm Ulmus americana,

3、 Crown Cut 2. APPLICATION The specifications WSS-M11G29-A/A3 were released for materials used for wooden decorative automotive components. Application of lacquer and other products will need to be considered to provide a suitable finished product. 3. REQUIREMENTS Material specification requirements

4、are to be used for initial qualification of materials. When in the fully assembled form the veneer assembly must perform to the Material specification requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and p

5、art producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Color, feature and grain to be as per Master samples 3.2.2 Thickness Nominal thickness - 0.6mm 3.2.3 Moisture content 11 - 18% 3.2.4 Density A/A2/A3 636.1 +/- 50 Kgm-33.3 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade