FORD WSS-M11G35-A-2009 DECORATIVE WOOD VENEER MAND MADE VENEER EBONY PATTERN POPLAR - POPULUS ALBA & OBECHE- TRIPLOCHITON SCLEROXYLON JAGUAR LAND ROVER ONLY TO BE USED WITH FORD W.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 04 21 Activated C. Bezant Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 1 DECORATIVE WOOD VENEER, MAND MADE VENEER, WSS-M11G35-A EBONY PATTERN, POPLAR - POPULUS ALBA & OBECHE- TRIPLOCHITON SCLEROX

2、YLON, JAGUAR LAND ROVER ONLY 1. SCOPE This specification defines wood veneers for use as decorative product on interior wood veneer assemblies. A = Man Made Veneer “ebony pattern“ POPLAR-POPULUS ALBA & OBECHE- TRIPLOCHITON SCLEROXYLON 2. APPLICATION The specification WSS-M11G35-A was released for ma

3、terials used for wooden decorative automotive components. Application of lacquer and other products will need to be considered to provide a suitable finished product. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. When in the fully assemble

4、d form the veneer assembly must perform to the Material specification requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production M

5、aterials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Color, feature and grain to be as per Master samples 3.2.2 Thickness Nominal thickness - 0.6mm 3.2.3 Moisture content 11-18% 3.2.4 Density 601.7 +/- 50 Kgm33.3 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade.