FORD WSS-M11G44-A-2008 DECORATIVE WOOD VENEER CHESTNUT NATURAL CASTANEA SATIVA TO BE USED WITH FORD WSS-M99P1111-A 《天然欧洲栗木（CASTANEA SATIVA）木制饰面薄板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 01 29 Activated A. KnellPrinted copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 1 DECORATIVE WOOD VENEER, CHESTNUT, NATURAL. WSS-M11G44-A CASTANEA SATIVA 1. SCOPE This specification defines wood veneer for

2、use as decorative product on interior wood veneer assemblies. A = Chestnut Castanea Sativa, Natural 2. APPLICATION This specification was released for materials used for wooden decorative automotive components. Application of lacquer and other products will need to be considered to provide a suitabl

3、e finished product. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. When in the fully assembled form the veneer assembly must comply with the Material performance requirements as specified on the engineering drawing. 3.1 STANDARD REQUIREMENT

4、S FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Color, feature and grain to be as per Master samples 3.2.2 Thickness Nominal thickness - 0.6mm 3.2.3 Moisture content 11 - 18% 3.2.4 Density 575 +/- 50 kg/m-3 3.3 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade.