1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2015 12 09 N Status No replacements named D. Murtonen, NA 2005 06 15 Activated L. Neves Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MONTANA CHARCOAL BLACK PATTERN, WARP KNITTED, WSS-M1H1004-A UNLAMINATED NOT TO BE USED F
2、OR NEW DESIGN 1. SCOPE The material defined by this specification is a warp knitted polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2007 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric
3、shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 6
4、% tolerance (ASTM D 3775) Wales 110 wales/10cm Courses 250 courses/10 cm 3.2.2 Fabric Weight, +/- 6% tolerance 320 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Pile/Back 100 dtex, f34, Semi Dull, Round, Textured Polyester 3.5 METHOD OF D
5、YEING Piece Dyed ENGINEERING MATERIAL SPECIFICATION WSS-M1H1004-A Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHING OPERATIONS Knit, Dye, Heat Set 3.7 TRIMMABILITY PROPERTIES 3.7.1 Stretch, range Stretch %, Wales 8 18% Courses 25 35% 3.8 FLAMMABILITY (ISO 3795/SAE J369) Burn Ra
6、te, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1