1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2015 12 09 N Status No replacements named D. Murtonen, NA 2005 09 28 Activated L. Neves Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, GRANADA MEDIUM DARK DOVE PATTERN, WOVEN, WSS-M1H1007-A UNLAMINATED NOT TO BE USED FOR NE
2、W DESIGN 1. SCOPE The material defined by this specification is a woven polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2007 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet a
3、ll requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 6% tolerance
4、(ASTM D 3775) Warp 360 yarn/10cm Fill 200 yarn/10cm 3.2.2 Fabric Weight, +/- 6% tolerance 307.0 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 500 dtex, f132, Semi Dull, Round, Textured Polyester Fill 330 dtex, f68, Semi Dull, Round,
5、Textured Polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H1007-A Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn Dyed 3.6 FINISHING OPERATIONS Warp, Wash, Heat Set 3.7 TRIMMABILITY PROPERTIES 3.7.1 Stretch, range Stretch %, - Wales 3 6% - Courses 2 5% 3.8 FLAMM
6、ABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1