FORD WSS-M1H1024-A-2006 FABRIC NATURE PATTERN FLAT WOVEN 100% POST INDUSTRIAL TO BE USED WITH FORD WSS-M99P1111-A 《100%工业使用后回收的大自然（NATURE）图案的平织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 05 22 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 FABRIC, NATURE PATTERN, FLAT WOVEN 100% POST INDUSTRIAL WSS-M1H1024-A 1. SCOPE The material defined by this specificat

2、ion is a NATURE pattern, Dobby flat woven bodycloth of good quality and uniform composition. The fabric is made of 100% Post-Industrial yarns. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for the 2007-1/2 U377 Escape Hybrid, seat insert. 3. R

3、EQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4, as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (

4、WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 355 ends/10 cm Fill 245 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/ backcoat 415 g/m2Laminated to 3mm foam 526 g/m2 3.3 COMPOSITION (ASTM D 629) Tolerance as specif

5、ied in WSS-M8P18-A1/A4. Fabric 100% Post- Industrial Polyester Backcoating Acrylic Latex ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1024-A Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f34 (false twist post i

6、ndustrial polyester yarn) x 2 polyester) x 3 Fill 16.7 tex f34 (false twist post industrial solution dye polyester yarn) x 2 16.7 tex f34 (false twist post industrial polyester) x 2 33.3 tex f72 (false twist post industrial polyester) x 2 3.5 METHOD OF DYEING Solution Dye/Piece Dyed 3.6 FINISHING OPERATIONS Dye, Dry, Backcoat, Dry