FORD WSS-M1H1046-A-2007 FABRIC WOVEN JACQUARD UNLAMINATED SKETCH B299 TO BE USED WITH FORD WSS-M99P1111-A 《SKETCH图案的B299不分层提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2007 01 19 Activated M. Montgomery Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 2 FABRIC, WOVEN JACQUARD, UNLAMINATED, SKETCH, B299 WSS-M1H1046-A 1. SCOPE The material defined by this specification is

2、 a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2007 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/

3、A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 270 ends/10 cm Wef

4、t 170 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 320 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 650 f 204 dtex, air texturized, Semi dull Weft 650 f 141 dtex, air texturized, Semi dull ENGINEERING MATERIAL SPECIFICATIONWSS

5、-M1H1046APrinted copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.