FORD WSS-M1H1048-A-2014 FABRIC ONTARIO PATTERN DOBBY WOVEN UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2014 06 19 N Status No replacement named M . Montgomery, EU 2006 12 11 Activated M. Montgomery Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ONTARIO PATTERN, DOBBY WOVEN, WSS-M1H1048-A UNLAMINATED NOT TO BE USED FOR NEW DE

2、SIGN 1. SCOPE The material defined by this specification is a woven dobby polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the CD345 Titanium. 3. REQUIREMENTS In addition to the requirements listed herein, the fa

3、bric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count,

4、+/- 5% tolerance (ASTM D 3775) Warp 340 ends/10 cm Weft 154 picks/10 cm 3.2.2 Fabric Weight, +/- 30g/m tolerance (FLTM BN 106-01) 405 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp dtex 620, (polyester) Weft dtex 550, (polyester) dtex 550 bright, (po

5、lyester) Nm 3.5 (polyester) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1048-A Copyright 2014, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.