FORD WSS-M1H1058-A-2016 FABRIC DAPHNE PATTERN DOBBY WOVEN UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver 1 2016 05 05 N Status No longer used D. Murtonen, NA 2008 05 19 Activated M. Montgomery, FOE Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DAPHNE PATTERN, DOBBY WOVEN, UNLAMINATED WSS-M1H1058-A NOT TO BE USED FOR NEW D

2、ESIGN 1. SCOPE The material defined by this specification is a woven dobby polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the CD340 mca. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric

3、 shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/-

4、10% tolerance (ASTM D 3775) Warp 235 ends/10 cm Weft 155 picks/10 cm 3.2.2 Fabric Weight, +/- 10 % tolerance (FLTM BN 106-01) 310 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp Package Dyed - 620dtex, f 102 (Air Jet Texturised) Weft Package Dyed - 54

5、0dtex, f 128 (Air Jet Texturised) Package Dyed Ribbon Effect Nm 2.5 (dtex 4000) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1054-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Package Dyed (warp & weft yarn/components) 3.6 FINISHED OPERATIONS Antistatic treatment/ Was

6、hing/thermo fixation 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 This fabric belongs to CD340 mca.