1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Ver 3 2008 06 12 Revised Revised Fabric Weight (3.2.2) V. Demarchi, FSA 2007 05 22 Revised Revised Title updated L. Neves 2006 10 11 Activated L. Neves Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 F
2、ABRIC, TURIM MIDNIGHT BLACK PATTERN, WOVEN JACQUARD WSS-M1H1090-A 1. SCOPE The material defined by this specification is a woven jacquard polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for B 402 - 2008 Model Year. 3. REQUIREME
3、NTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-
4、M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 29 yarn/cm Fill 18 yarn/cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) Seat (laminated to 4 mm foam + backing fabric) 380 - 420 g/m Door Panel (laminated to 2 mm foam + backing fabric) 300 - 350 g/m 3.3 COMP
5、OSITION (ASTM D 629) Fabric 100% Polyester Foam PUR/Polyester Backing Fabric (Seats only) 100% Polyester ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1090-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 450 dtex, f 48,
6、Semi Dull, Round, Textured Polyester Fill Anthracite (Solution Dyed) 650 dtex, f 0, Semi dull, Round, Textured Polyester Kermite (Yarn Dyed) 250x2 dtex, f 72, Semi dull, Round, Textured Polyester Glycyne (Yarn Dyed) 250x2 dtex, f 68, Semi dull, Round, Textured Polyester Parma (Yarn Dyed) 250x2 dtex,
7、 f 72, Semi dull, Round, Textured Polyester 3.6 FINISHING OPERATIONS Wash, Heat Set 3.7 THICKNESS, mm, range (ASTM D 1777) Seat (laminated to 4 mm foam + backing fabric) 3.0 a 4.0 mm Door Panel (laminated to 4 mm foam) 3.0 a 4.0 mm 3.7 TRIMMABILITY PROPERTIES 3.7.1 Stretch, %, range (SAE J855) Seat
8、and Door Panel Warp 5% Fill 5% 3.8 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1