FORD WSS-M1H1090-A-2016 FABRIC TURIM MIDNIGHT BLACK PATTERN WOVEN JACQUARD TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver 4 2016 05 05 N Status No longer used D. Murtonen, NA 2008 06 12 Revised Revised Fabric Weight (3.2.2) V. Demarchi, FSA 2007 05 22 Revised Revised Title updated L. Neves 2006 10 11 Activated L. Neves Copyright 2016, Ford Global Technologie

2、s, LLC Page 1 of 2 FABRIC, TURIM MIDNIGHT BLACK PATTERN, WOVEN JACQUARD WSS-M1H1090-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior tri

3、m fabric for B 402 - 2008 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys St

4、andard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 29 yarn/cm Fill 18 yarn/cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) Seat (laminated to 4 mm foam + backing fabric) 380 - 420 g/m Door Panel (laminated to

5、2 mm foam + backing fabric) 300 - 350 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam PUR/Polyester Backing Fabric (Seats only) 100% Polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H1090-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Wa

6、rp 450 dtex, f 48, Semi Dull, Round, Textured Polyester Fill Anthracite (Solution Dyed) 650 dtex, f 0, Semi dull, Round, Textured Polyester Kermite (Yarn Dyed) 250x2 dtex, f 72, Semi dull, Round, Textured Polyester Glycyne (Yarn Dyed) 250x2 dtex, f 68, Semi dull, Round, Textured Polyester Parma (Yar

7、n Dyed) 250x2 dtex, f 72, Semi dull, Round, Textured Polyester 3.6 FINISHING OPERATIONS Wash, Heat Set 3.7 THICKNESS, mm, range (ASTM D 1777) Seat (laminated to 4 mm foam + backing fabric) 3.0 a 4.0 mm Door Panel (laminated to 4 mm foam) 3.0 a 4.0 mm 3.7 TRIMMABILITY PROPERTIES 3.7.1 Stretch, %, ran

8、ge (SAE J855) Seat and Door Panel Warp 5% Fill 5% 3.8 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.